Furthermore, we also studied the relative strength of different composition to oxidation stability by principal component analysis.
此外，还通过主成分分析的方法分析了不同组成对旋转氧弹值的影响强弱。
The national image is a national soft strength important component, set up the good national image already to become the globalized time road of the important survival.
国家形象是一个国家软实力的重要组成部分，树立良好的国家形象已经成为全球化时代的重要生存之道。
The township enterprise is a great creation of Chinese peasants. It is an important component of our national economy and main strength of the rural economy.
乡镇企业是中国农民的一项伟大创造，是我国国民经济的重要组成部分和农村经济的主体力量。
These deformations are nonelastic, depending on the relative strength and stiffness of each component of the frame.
这种变形一般是非弹性的，其大小取决于框架中每个组成部分的相对强度和刚度。
Then, this paper synthetically evaluates the comprehensive strength of patent about more developed 10 areas of our country by using the principal component analysis.
在此基础上，运用主成分分析方法对我国10个经济较发达地区的专利实力进行了分析评价。
The strain ageing of cold-rolling ribbed bar leads to high strength and drop of elongation, so this seriously affects the quality of concrete component and regular production of the bar.
冷轧带肋钢筋应变时效导致钢筋强度升高，延伸率下降，严重影响钢筋混凝土构件质量及生产厂家的正常生产。
To increase the whole strength and stiffness of the composite wing and to lower the manufacturing cost, the main component of the wing is employed with stitched technique.
为了提高复合材料机翼的整体强度和刚度，降低制造成本，机翼的主要结构件采用缝编技术。
Strong adhesion, high strength paper based tape. It's used for joint of heavy electric component.
高粘接力，高强度纸基胶带，用于重型电子元件粘接。
Through analysis and calculation of the fatigue strength condition of component parts this paper discovers the erratam and analyses the reason.
通过对广泛应用于机械设计中的非对称循环下构件疲劳强度条件的分析，提出了存在的问题。
This paper presented a method of strength calculation and strength check of annular and circular section in flexure and eccentrically compressed component for reinforced concrete structure.
论述钢筋混凝土结构环形截面及圆形截面受弯构件、偏心受压构件强度计算和强度复核的计算方法。
By optimizing the cross section sizes of the portal framed structure component, the weight of the portal framed structure had been decreased when it meets the requirement of strength.
通过优化门型架结构中各构件的截面尺寸，在满足强度要求的条件下达到了减轻结构重量的目的。
The influence of inorganic filler, functional monomer, etching treatment of teeth surface, etc on the shearing strength of one-component visible-light curing orthodontic adhesive was studied.
研究无机填料、功能单体及牙齿表面酸蚀与否等因素对单组分可见光固化齿科正畸粘接剂剪切强度的影响。
The bongding strength of blended PPS/FEP anti-corrosion coatings was determined by pull-off test. The effects of the blending component PPS on the bongding strength were studied.
采用拉开法测定了PPS/FEP共混改性防腐涂层的结合强度，研究了共混组分PPS对复合防腐涂层结合强度的影响。
The force-bearing state of powered parachute is analyzed in this paper, and much calculation about the strength and stability of major force - bearing component is done.
本文分析动力伞结构的受力状态，并对主要承力构件进行了强度及稳定性计算。
Effects of volume percent of each component in oxidation solution, time and temperature of oxidation on thickness and tearing strength of blackened coating were studied.
研究了黑化液组分的体积分数、黑化处理时间及温度对黑化层厚度及撕裂强度的影响。
The content of active component was not as high as possible, it had a certain relationship with mechanical strength which was directly related to the desulfurizer of the re-use.
活性组分的含量不是越高越好，它与脱硫剂的机械强度有一定的关系，而机械强度则直接关系到脱硫剂的重复使用。
Structual simulation is used to test the strength and deflection of a component.
结构模拟器被用来测试组件的强度和偏差。
The effects of preparing conditions, such as particle size of the solid component, liquid-to-powder ratio (L/P) and liquid composition, on compressive strength of calcium phosphate were investigated.
考察了固相组分颗粒尺寸、液固比（L/P）和固化液组成等对骨水泥抗压强度的影响。
This paper studied the new method of deep drawing of cold rolling steel-metal part and the die structure. And it also proposed the strength calculation method of main die component.
研究了冷轧薄钢板零件的深拉伸新方法和模具结构，提出了模具主要元件的强度计算方法。
Resolve the problem of stress focus don't adopt increasing component dimension, but structure measure by reducing stress focus or locally supplying strength.
解决应力集中问题不应通过加大构件断面尺寸，而应采用降低应力集中的结构措施或局部补强。
P. To guarantee the strength of the hull, the proper connection methods of each component are determined after the analysis of several connection methods.
从保证艇体的强度出发，本文分析研究了各种连接方式，最终确定了各构件的连接方式。
The invention component combines the high strength of the ceramic film tube and the macromolecule better air permeability, has a rapid degassing speed, lower cost, convenient installation and use.
本发明组件将陶瓷膜管的高强度和高分子高透气性结合起来，脱气速度快、造价低、安装使用方便。
Residual strength model is a proper methodology to describe the dynamic fatigue behavior of mechanical component.
剩余强度模型在描述试件的动态疲劳行为方面是一种比较切合实际的方法。
Resloving the problem of stress focus don't adopt increasing component dimension, but structure measure by reducing stress focus or locally supplying strength.
解决应力集中问题不应加大构件断面尺寸，而应采用降低应力集中的结构措施或局部补强。
Fatigue strength and failure mechanisms are presented. A survey of mechanical and biomechanical component fatigue failures is given.
将介绍疲劳强度及失效机制。并提出一个对于机械及生物机械元件疲劳失效的研究。
The upper structure vibration of bridge caused by the vehicles driving force may lead the structural component fatigue or reduction of the strength and stability.
车辆动力作用引起桥梁上部结构的振动可能使结构构件产生疲劳，降低其强度和稳定性；
The form (flow or break) of strength failure in structural component is connected with the mechanical property and the stress state of the material.
构件强度失效(破坏)的形式(流动或断裂)与材料的力学性质、应力状态有关。
Stress intensity factor indicates the strength of the singular stress field at crack-tip, it is the basis of studying the law of crack propagating and the strength of the component with crack.
应力强度因子表征了裂纹尖端奇异应力场的强度，它是研究裂纹扩展规律和带裂纹构件强度的基础。
Stress intensity factor indicates the strength of the singular stress field at crack-tip, it is the basis of studying the law of crack propagating and the strength of the component with crack.
应力强度因子表征了裂纹尖端奇异应力场的强度，它是研究裂纹扩展规律和带裂纹构件强度的基础。
应用推荐