Failure processes of sheet metals are modeled under plane strain tension.
在平面应变拉伸的情况下仿造了板形的失效过程。
Tension, strain and pressure at work and at home make the mind even more restless, and attract more thoughts into it.
工作和家庭带来的紧张、疲劳和压力更是让大脑不得安宁，它们把各类想法吸入大脑，让大脑思考。
Researchers E have defined stress as any major changes to the status quo (existing balance) that may potentially cause mental or emotional strain or tension.
根据研究者的定义，压力是指任何对于现状（现有的平衡）的改变，可能会导致精神或情绪上的紧张。 。
It points out that the position of the maximum strain, stress and tension is at first group trough type roller, not at passing poion of pulley if the head drum works as pulley.
指出在头部滚筒作为驱动滚筒的布置系统中，胶带最大应变、力及张力位置不在驱动滚筒相遇点，而在过渡段第一组槽形托辊处。
The mechanical calculation of ADSS fiber optic cable is introduced and the calculation formulae for sag, tension, strain and slack length etc are given.
介绍了ADSS光缆的力学计算，给出了光缆弧垂、张力、应变和悬长等计算公式，并对普遍采用的“悬链线”和“抛物线”两种计算方法加以比较。
The applied results indicate that fiber grating strain sensors are effectively able to monitor the tension status about reinforced concrete bowstring arch bridge.
应用结果表明，光纤光栅测力传感器可有效监测钢管混凝土系杆的受力状况。
The swelling strain of mortar increases linearly with the increase of surface tension of immersion liquids.
随着浸泡液体表面张力的增大，砂浆的膨胀应变线性增大。
The stress-strain entire curve in direct tension can comprehensively reflect the tensile performance of concrete.
混凝土拉伸应力—应变全曲线能较全面地反映混凝土的拉伸性能。
The tension test at room temperature is used to study the size effect of thin copper sheet with different crystal size, different thickness and different strain rate.
对所制备的薄铜板进行了室温拉伸实验，研究薄铜板在不同晶粒大小、不同板厚和不同应变速率下的尺寸效应。
The interaction between mechanics and electrochemistry during the stress corrosion cracking (SCC) of 7075 aluminum alloy was studied using slow strain rate tension (SSRT) technique.
用慢应变速率拉伸(SSRT)技术研究了7075铝合金在应力腐蚀过程中的力学与电化学交互作用。
Regular practice will relieve lower back pain and release tension and strain in the upper back and neck area.
规律的练习会释放下背部疼痛，放松上背部和颈部区域。
In the method the modal strain energy of an element is divided into tension modal strain energy, torsion modal strain energy and bending modal strain energy.
该方法将单元模态应变能分解为拉压、扭转和弯曲模态应变能，利用单元的主要模态应变能分量与结构固有频率的改变量对结构裂纹位置进行识别。
Molecular dynamic simulations were used to investigate the effect of strain rate and size on the mechanical properties of nano-bi-crystal Cu under uniaxial tension.
利用分子动力学方法研究了双晶铜在单向拉伸载荷作用下弹性性能的应变率效应和尺寸效应。
The experimental results of steel bar tension strain and concrete compression strain are given.
给出了钢筋拉应变、混凝土压应变的试验结果。
The figures can be divided into three main types, which refer to compression, plain strain, and tension, respectively.
正应力图形和剪应力图形可以分为三种类型，分别对应压缩类变形、平面应变以及拉伸类变形。
The experimental items of the tests are tension of constant strain rate, creep at constant stress, and strain controlled low cycle fatigue of constant strain rate.
实验项目有等应变率拉伸、等应力蠕变和控制应变幅的等应变率塑性循环。
When the tensile strain reaches the limit load, the force of tension suddenly becomes very small, because clusters structures change.
当拉伸应变达到承载极限，继续拉伸，力突然变的很小，这是因为团簇发生了结构变化。
Along the cladding direction, plastic tension strain appears which is the main cause of cladding layer cracking.
熔覆层材料沿熔覆方向发生的塑性拉伸变形，是造成熔覆层开裂的主要原因。
A common cause of neck pain is muscle strain or tension.
颈椎痛的一个常见原因是肌肉扭伤或者拉伸。
The modulus of the material decreases and the inelastic strain increases with the increase of tension stress, and the composite exhibits a largely non-linear stress-strain behavior up to rupture.
随着应力的增加，材料模量减小，非弹性应变变大，复合材料的应力-应变行为表现为非线性直至断裂。
Analytical solution of complete stress-strain curve of rock specimen in uniaxial tension is proposed based on gradient-dependent plasticity considering strain localization initiated at peak strength.
基于梯度塑性理论，考虑了应变局部化，提出单轴拉伸条件下岩样全程应力—应变曲线解析解。
In simple tension experiment, the stress-strain relationship submits Hook's law within the limit of proportionality.
摘要单向拉伸试验中，在比例极限内，应力应变关系服从胡克定律。
Based on the direct tension test, the characteristics of tension stress-strain full curves of steel fiber reinforced self-stressing concrete were investigated.
通过直接拉伸试验研究了不同自应力等级下的钢纤维自应力混凝土的受拉应力-应变全曲线特征。
Reducing the tension upon the fiber under high temperature to provide enough movement space for polyester segments, which is beneficial to the relaxation of high elastic strain.
适当地降低高温下纤维的张力，为高分子链段的运动提供了活动空间，有利于高弹形变的松弛。
By maximum tension theory and maximum strain energy density theory in fracture mechanics, created and propagation direction of new artificial fracture are analysized.
分别应用断裂力学中的最大拉应力理论和应变能密度因子理论分析了重复压裂中水力裂缝的初始扩展和延伸方向。
Based on the experimental results of isothermal strain rate tension test, a non-linearity model of constitutive relationships for TC6 titanium alloy was established.
在正交法设计的高温拉伸实验结果的基础上，本文建立了TC6钛合金本构关系的非线性模型。
An isoparametric finite element program of large elastic-plastic strain (LEPS) is used to analyse the necking of a cylindrical bar and a plate specimen under uniaxial tension.
本文用弹塑性大应变问题的等参数有限元分析程序(LEPS程序)，对平板和圆棒试件的颈缩作了较全面的分析。
In addition, the stress-strain of typical points in simple tension, drawing, and extrusion was successfully analyzed by the figures.
利用正应力图形和剪应力图形，分析了单向拉伸、拉深及挤压工序中典型点的变形类型及尺寸变化趋势。
In addition, the stress-strain of typical points in simple tension, drawing, and extrusion was successfully analyzed by the figures.
利用正应力图形和剪应力图形，分析了单向拉伸、拉深及挤压工序中典型点的变形类型及尺寸变化趋势。
应用推荐