Designed with step motor system, easy operating.
本机步进定长系统，操作方便。
An example of step motor system that was controlled by SCM-8751 was introduced.
介绍了一种由8751单片机控制步进电机的系统实例。
The design of the single chip system, sample box thermostat circuit, sample position detecting circuit and step motor control circuit are discussed.
着重讨论了单片机系统、样品箱恒温电路、样品位置检测电路和步进电机控制电路的设计。
On this base, the closed - loop control method of hybrid step motor using the harmonic back EMF is investigated, and the microcomputer control system of step motor is designed.
在此基础上研究了利用谐波反电势信号实现混合式步进电动机闭环控制的方法，设计了步进电动机的微机控制系统。
With the help of precise driving system of sensor measuring and single chip micro-computer controlled step motor, enabled the cart to move flexibly in narrow aisles of the storehouse.
借助传感器测定和单片机控制步进电机的精密驱动系统，使得自动搬运车能在狭小的仓库过道中灵活行进。
In cooperation with computer control step motor, the positioning system has such advantages as automatization, high precision, large view field and non contact etc.
该系统与计算机控制的步进电机配合使用，具有自动化程度高、大视场高精度和非接触性等优点。
The software connection problem between the output of non-model controller and step motor, is discussed using step motor as the actuator of control system.
以步进电机作为控制系统的执行机构，讨论了无模型控制器的输出与步进电机之间的软件连接问题。
We designed and constructed the distributing step motor controlling system.
设计并构建了分布式步进电机控制系统。
This system uses a high-low supply voltage and a series resistance for increasing the working frequency of the step motor.
本系统采用了高低压驱动电源和串联电阻法，以提高步进电机的工作频率。
Permanent magnet synchronous motor (PMSM) step motion control for the electric actuator is a new actuator control system adopted incremental motion control theory.
永磁同步电动机步进控制的电动执行器是采用增量运动控制理论研制的新一代执行器控制系统。
The step motor position-control, add and subtract rate control, figure function, man-machine dialogue function etc have been realized in the system.
本文开发的步进电机控制系统可以实现电机位置控制、加减速控制、并具有插补运算、图形显示、人机对话等功能。
This paper introduces the processing method of clutch tooth, sets forth the principle that step motor achieve Angle auto-dividing by PLC and designs the system of PLC controlling.
介绍了离合器齿牙的加工方法，简述了PLC控制步进电机实现自动分度加工的原理，并设计了PLC控制系统。
NC servo spindle features new type step motor applying fine divide method to servo system controlled by single chip micro computer.
采用新型步进电机的数控主轴头，并将细分技术用于单片微机控制的伺服系统。
PCB flying probe checking up system based on step motor is introduced, this paper presents checking up principle and realization of hardware of it.
通过步进电机对飞针的控制，实现了PC B飞针检测系统的定位，并对硬件的检测原理和具体的实现作了分析。
DSP control system is introduced for the hybrid linear step motor.
介绍一种混合式直线步进电机的DSP控制系统。
The functional design and hardware component of control system were introduced, and the control calculation of driving ring plate with step motor was deduced in details.
介绍了控制系统的功能设计及硬件组成，重点推导了用步进电机驱动钢领板的控制算法。
In combining cantilever control with angular measurement and using the measured angular values as feedback, a closed-loop displacement control system is formed together with a step motor.
将弦臂控制和角度测量结合在一起，以测得的角度值作为反馈，和步进电机组成闭环位移控制系统。
Under the control of the microcomputer this system not only can automatically determine the optimal control pulse sequence of the step motor, but also can control the step motor optimally.
在微机的控制下，该系统既能自动确定步进电动机的最优控制脉冲序列，又能对步进电动机实施最优控制。
A synchronous motor step motion system of current lagging - loop tracking control is designed under the foundation of mathematical analysis for synchronous motor step motion system.
在对同步电动机步进传动系统进行教学分析的基础上，设计组成了电流俗环跟踪控制的同步电动机步进传动系统。
The paper describes that a step motor driver based on single-chip computer 8031 minimum application system.
本文叙述基于单片机8031最小应用系统的步进电机驱动器。
The control system adopts inverter with step less motor. It is the classical machine for simple working.
该控制系统采用无级变频电机，这是进行简单工作的经典机器。
The separation system choose circle and line motor, step motor, and electromagnet to realize auto-sorting of the wafers.
分选系统选用圆振与直振实现自动上料、步进电动机及其驱动器实现传输分档以及电磁铁实现自动下料。
The control principle of step motor is exposed, drive control of feed system is carried out by use of motion controller, meanwhile, dot motion control of step motor is also carried out by use of PLC.
阐述了步进电机控制原理，利用运动控制器实现了进给系统的联动控制，利用PLC实现了步进电机的点动控制。
The slave implements taping by the close loop system of the step motor and the rotary encoder.
从站通过步进电机和旋转编码器构成的闭环系统实现收带功能。
This paper introduced the hardware and software constitution of the step-motor direct control system with PLC, and expounded the application in the engine control system in bench test.
介绍了运用PLC直接控制步进电机系统的软硬件组成，阐述了PLC直接控制步进电机技术在发动机台架试验测控系统中的应用。
The paper USES incremental PID algorithm to control step motor for improve system stability.
对步进电机的控制，本文采用了增量式PID算法，增加了系统的稳定性。
Next is software design of the system, including overall system flow chart, throttle position detection map and the step motor commutation and the point of sub-flow chart.
系统的设计除了硬件还需要软件来支撑，软件设计包括系统整体流程图、油门位置检测图和步进电机换相及角度细分流程图。
Next is software design of the system, including overall system flow chart, throttle position detection map and the step motor commutation and the point of sub-flow chart.
系统的设计除了硬件还需要软件来支撑，软件设计包括系统整体流程图、油门位置检测图和步进电机换相及角度细分流程图。
应用推荐