The bath formulation and operating conditions of an imitation stainless steel plating process were introduced.
介绍了一种仿不锈钢电镀工艺配方和操作条件。
Watch gold plating is generally used stainless steel plating techniques, so it has rarely been found in this case.
现在钟表镀金普遍采用不锈钢电镀技巧，因此已经很少发现这种情形了。
Though galvanisation is often done by dipping steel in liquid zinc, it is sometimes done by electrolysis—nickel and copper plating are normally done this way.
尽管一般是通过液态锌蘸洗钢铁来镀锌，有时候也会用电解的方法，在电镀镍和铜时就通常使用电镀。
For example steel base plated copper, nickel, chromium plating, low layer again tin bronze chrome, multi-layer nickel chrome plating nickel ferroalloy, chrome, and so on.
例如钢基上镀铜、镍层再镀铬、低锡青铜上镀铬、多层镍上镀铬、镍铁合金镀层上镀铬等等。
The steel surface also accepted chrome plating better than the forged I-beam axles, so hot rodders often preferred them for their aesthetic qualities, as well.
众所周知，钢制的车轴要比I型前车轴更适合进行电镀铬的工艺，因此钢制车轴更加美观，也更受改装老爷车的车迷的欣赏。
Special treatment is recommended to activate beryllium copper surface before chromium plating. And special steps which differ from conventional chromium plating on steel parts are to be taken.
在铍青铜合金上电镀铝，需在镀铝前作特殊的表面活化处理，镀铬时也有不同于钢铁件镀铬的操作方法。
GRG, Copper plating, Stainless steel, Marble, Weathering steel, Custom carpet, Wood floors.
铜片，电镀不锈钢，大理石，耐候钢，定做地毯，实木地板。
This step is the main, first to control the temperature, time and liquid zinc plating steel plate is removed from the liquid zinc in speed.
这一步最为主要，首先要操控好锌液温度、浸镀时刻及钢板从锌液中移出的速度。
Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process.
通过在机械镀锌过程中添加不同量的稀土金属盐，在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
Holding primary hardness, magnetism and plating properties of matrix, protection performance of steel was improved by combining the Zn - Fe alloy electroplating and phosphating technology.
为了保持基体金属硬度、磁性以及电镀层性能等均不变，将锌铁合金电镀工艺与磷化工艺进行了组合，以提高钢铁件的防护性能。
Powder coat, paint, enamel, plastic coatings or plating on steel are typical measurement applications.
粉末涂层，油漆，搪瓷，塑料涂层或镀钢是典型的测量应用。
The formation and growth kinetics of the intermetallic compounds through reaction between liquid Zn and low carbon steel containing Si which is treated by electroless pre-plating ni are analyzed.
采用预镀镍的方法，研究了含硅低碳钢预镀镍后与液态锌的反应以及金属间化合物组织的形成和变化规律。
The stainless steel matrix was dipped in a solution containing palladium and silver ions to prepare palladium-silver membrane by electroless plating.
无电解镀共沉积钯银合金膜是纯化氢同位素最有发展前途的方法之一。
Chrome plating chromium plating for steel parts for Yin polarity coating.
铬镀层铬镀层对钢铁零件为阴极性镀层。
The process of barrel nickel plating of steel battery shell is strictly controlled in order to reduce production cost and improve product quality.
对电池钢壳滚镀镍工艺进行严格的控制，以达到降低生产成本、提高产品质量的目的。
Chrome plating steel case and ring, glass lens, brass internal and connection, Chrome plating brass joint.
电镀铁壳，电镀铁圈，玻璃面，铜机芯，铜管子。电镀铜接头。
For carbon steel, stainless steel, plating steel and all kinds of non-ferrous metal rods, tubes, the sheet metal, screw the spot welding and welding until the row.
可进行碳钢、不锈钢、电镀钢及各种有色金属的线材、管材、板料，螺钉等到的点焊和排焊。
An applied formula of electroless ni plating for aluminium alloy and steel was developed according to production practice.
针对生产实践，提出了一种铝合金及钢铁件化学镀镍配方。
A novel technology of acidic electroless copper plating on steel matrix was studied in this paper.
研制了一种新型的钢铁基件酸性化学镀铜工艺技术。
In this paper the application of the brush plating technology in mending surface damage of Austenite stainless steel parts is introduced. The process and conditions of this technology are put forward.
本文介绍了电刷镀技术在奥氏体不锈钢零部件表面损伤修复中的应用，提出了电刷镀修复奥氏体不锈钢件的工艺流程及条件。
Finally steel balls millstone covering with Ni-Fe-diamond composite electro-brush plating film is produced successfully.
成功的试制成了覆盖有镍-铁-金刚石复合电刷镀层的钢球研磨板。
A process for continuous copper plating on steel wire at high current densities was described in detail.
介绍了高电流密度连续生产钢芯镀铜线工艺。
There are stainless steel and chrome plating options available.
有不锈钢和镀铬供客户选择。
The inner anode and its choice for copper plating on stainless steel was emphatically introduced.
重点对不锈钢镀铜的内阳极及其选择作了介绍。
The process flows and technical regimes of main sequence of barrel nickel plating for steel battery shell were introduced.
介绍了一种电池钢壳滚镀镍的工艺流程和各主要工序的工艺规范。
The working mechanism of vibration plating and the process flow and main points of each procedure of gold plating with vibration for stainless steel spring needles were introduced.
介绍了振动电镀的工作原理以及不锈钢弹簧针振动镀金工艺流程及各工序操作要点。
The properties and section corrosion features of steel sheet coated with Al-Zn alloy plating were analyzed.
介绍了覆铝锌板的镀层性能特征以及切口的腐蚀状况。
The properties and section corrosion features of steel sheet coated with Al-Zn alloy plating were analyzed.
介绍了覆铝锌板的镀层性能特征以及切口的腐蚀状况。
应用推荐