Structure: Flow transmitter is consisted by shell, non-linear column, test, magnetic steel, etc.
结构：流量变送器主要由壳体，非流线性柱体，检测器，磁钢等零部件组成。
Additional components such as alloy sheet steel strip covers are available to protect the linear guidance systems and drive unit.
额外的元件，如合金板材带钢可覆盖以保护线性制导系统和驱动装置。
The master production scheduling(MPS) problem of hot rolling seamless steel tube is formulated as a mixed integer linear programming model.
建立了热轧无缝钢管主生产计划问题的混合整数线性规划模型。
A new linear displacement sensor with sealed ultra-long precision steel belt grating is studied.
研制了一种新型的密封式超长精密钢带光栅线位移传感器。
From the curves we can see that most of the experiment results are above the linear cumulative damage curve, it indicates that the steel P91 is negative interaction under the condition of this thesis.
由该图可以看出，绝大多数试验点落在线性累积损伤线上侧，表明在本文试验条件下，P91钢母材和焊材蠕变疲劳交互作用均表现为负交互作用。
Inhibitive effects of polyaniline (PANI) for the corrosion of mild steel were studied using visual observation, open circuit potential (OCP) and linear polarisation resistance (LPR).
使用外观观察、开路电位以及线性极化电阻等方法研究了聚苯胺对碳钢腐蚀的阻化作用。
The analysis of cracking in steel Bridges can usually be accomplished by using linear elastic fracture mechanics.
通常可用线弹性断裂力学进行钢桥裂纹分析。
This system realizes data acquisition and processing of linear CCD based on DSP, and achieves the goal of hot rolling steel plate size real-time measurement in high speed.
该系统实现了基于DSP的线阵CCD数据采集与处理，达到了对热轧钢板尺寸实时在线测量的目的。
In this paper, for the thin walled linear strengthened steel box beam, the strength and valid width ratio of flange is investigated under the condition of elastoplastic limit state.
对由线应力性强化材料制造的薄壁钢箱梁在弯曲极限状态下的强度及有效宽比进行了分析。
The oxidation kinetics of the T91 steel under high-temperature air medium was studied by serial weighing method with thermal analysis balance and linear regression method.
用热分析天平连续称重法和线性回归分析对高温空气介质下t 91钢氧化动力学进行研究。
Calculating methods of cracking moment, ultimate moment, stiffness of the beams strengthened by steel plate are offered according to the non-linear relationship between stress and strain of concrete.
根据混凝土的非线性本构关系，提出了粘钢加固梁的开裂弯矩、极限弯矩、刚度的计算方法，并将理论值与试验值进行对比分析。
The temperature field with phase transformation and non-linear surface heat-transfer coefficient of steel 1045 during quenching is calculated with ANSYS program.
应用有限元分析软件ANSYS计算了1045钢淬火时具有相变和非线性表面换热系数的温度场。
This method organically combined linear control and non-linear control and implemented measurement and optimal control of width of steel plate.
该方法将线性控制与非线性控制有机结合，实现了钢板宽度的测量与优化控制。
On the basis of theory analysis, it is deduced that the axial stress is linear distribution, when the steel support is loaded by axial force and moment.
根据壳体理论对钢支撑受力机理进行分析和简化计算，得出钢支撑在轴力和弯矩共同作用下，轴向正应力呈线性分布。
The hardness of the experimental steel decreases with the increase of average austenite grain size, which approximately keeps a linear relationship.
实验钢的硬度随平均晶粒尺寸的增大而逐渐降低，并呈近似的线性关系。
A new method of achieving steel band tension by using cylinder helix torsional spring was presented in the course of studying the gapless linear transmission system.
在研究一种钢带无间隙直线传动机构的过程中，提出一种采用圆柱螺旋扭簧实现钢带张紧的新方法。
The pretreatment techniques in blasting of heavy steel structure by means of linear shaped charge were discussed.
为了分析钢结构物聚能切割爆破的预处理。
The chloride ion induced steel corrosion was investigated through accelerated test under applied 3v voltage. The mentioned corrosion process was studied through Linear Polarization Method.
在3V外加电压的作用下，进行混凝土中氯离子导致的钢筋锈蚀的加速试验，通过线性极化法研究钢筋的锈蚀过程。
Some studies in design, advanced development, experiment for the steel-secondary plane linear induction motor were made.
对钢次级平面型直线异步电动机进行了设计、试制和试验。
The working for square pockets of turning steel cages having high hardness and difficult to broach is conducted in linear cutting.
方形兜孔钢保持架因为钢架硬度高、拉削难度大等特点，始终采用线切割加工方兜孔。
At first, linear stress analyses were performed to investigate the stress-strain distribution of axially compressed column-supported steel silos with engaged columns.
通过线性分析初步了解了轴压下仓壁柱承钢筒仓的应力应变分布特性。
Corrosion behavior of X70 steel in lactic acid solutions with different concentration and different temperature was investigated by means of EIS and Linear Sweep Voltammetry (LSV).
运用交流阻抗(EIS)法和单线性扫描(lsv)法研究X70钢在乳酸溶液中的腐蚀行为，乳酸浓度和温度对X70钢腐蚀行为的影响。
The non-linear stability problem occurred in the interior steel sheet of a steel-concrete composite bored shaft lining in coal mines is discussed.
本文研究用煤矿钻井法钻凿竖井时钢板-混凝土复合井壁内钢板的非线性失稳问题。
A good linear relationship meet between fractal dimension and specific surface area of slag powder, and positive correlation with the cementitious properties of steel slag-based cement material.
分形维数与钢渣微粉的比表面积间满足良好的线性关系，并与钢渣基水泥材料的胶凝性能良性相关。
This problem could be well resolved by adopting improved steel tape precise test method and actual linear expansion coefficient, as well as self-made testing apparatus and tools.
采用钢尺精密检定的改进方法及钢尺实际线膨胀系数检测方法，加之自制的检定器具、设施，可较好地解决钢尺自身准确性问。
Regression analysis of atmospheric corrosion date at BEIJING shows that relationship between corrosion date of weathering and carbon steel and time follows linear bilogarithmic law.
研究发现在北京地区两类材料的大气腐蚀数据无显著差异，在青岛、江津、武汉地区耐候钢腐蚀率显著低于碳钢。
In the process of steel-making, killing oxygen by adding aluminum process is a controlled object whose parameters are distributed and non-linear, and its observed data are discrete.
炼钢生产中，定氧加铝工艺的被控对象具有参数分布、非线性、动态观测数据离散等特征，定氧加铝模型的建立是该工艺的核心。
The critical loads of linear elastic flexuosity were computed for 64,80 m hoist masts under the condition of inclined steel cable on the top using finite numerical simulation method.
采用有限元数值模拟方法，分别计算了这两种特大型起重桅杆在顶端钢丝绳斜拉条件下桅杆吊重的线弹性屈曲临界载荷。
The critical loads of linear elastic flexuosity were computed for 64,80 m hoist masts under the condition of inclined steel cable on the top using finite numerical simulation method.
采用有限元数值模拟方法，分别计算了这两种特大型起重桅杆在顶端钢丝绳斜拉条件下桅杆吊重的线弹性屈曲临界载荷。
应用推荐