Cast steel hollow spherical joint with tube is a new type of cast steel joint.
铸钢空心球管节点是一种新型的铸钢节点形式。
The beam-column joint strengthened by plate rings is the most mature and widely used steel joint.
针对钢结构设计的难点——特殊的不规则布置梁柱连接节点的设计进行了研究。
Black steel case, black stack steel ring, glass lens, brass internal and connection, stainless steel joint.
黑铁壳，黑铁圈，玻璃面，铜机芯，铜管子，不锈钢接头。
KRHD Flexible Steel joint (Hoop) : Off-type expansion joints is a reliable product for easy installation of connecting pipes.
KRHD钢质柔性接头(卡箍)：对开式伸缩接头时一种管道连接，性能可靠，安装简便的产品。
The present investigation indicates that the cast steel joint subjected to its design loads has sufficient strength and rigidity.
研究表明，该铸钢节点在设计荷载的作用下，具有足够的强度和刚度；
The corrosion resistance of B steel joint is better than that of A steel joint, but the corrosion resistance of welded joint of B steel need to be improved.
比较A、B钢焊接接头，B钢接头的耐蚀性总体上优于A钢，但需要改进其焊缝金属的耐蚀性；
Elastoplastic analysis and full scale experiment of a spherical cast steel joint used in steel reticulated shells of Chongqing Olympic Stadium was carried out.
为了对重庆奥林匹克体育中心网壳结构铸钢球节点承载安全性作出评价，本文对一关键节点进行了弹塑性分析和实体试验研究。
The article discussed and analysed 18-8 Austenite stainless steel joint question about Intercrystalline Corrosion, then it put forward appropriate measurements.
本文讨论和分析了18 - 8奥氏体不锈钢接头晶间腐蚀问题，提出了相应的控制措施。
In this paper, combining with the design of The Three Museums of Wuxi, the design, finite element analysis and joint experiment of cast-steel joint are introduced.
文章介绍了无锡博物院项目中铸钢节点的设计情况，铸钢节点的有限元分析及铸钢节点试验。
In this paper, shearing mechanism in the joint core region is analysed from crack to limit state, on the basis of shear test of wrapped steel joint under the monotonic load.
本文根据外包钢节点在单调荷载下的抗剪试验，分析了节点核心区在开裂状态之前及开裂状态到极限状态的抗剪机理，求出了各主要抗剪因素的剪力分配。
This new bridge expansion was proved that it maintains convenient, drives comfortable. and has good economic benefit. contrasting to rubber expansion joint and shaped steel joint.
通过和板式橡胶伸缩缝、型钢缝的对比，证明该新型桥梁伸缩缝具有维修方便、行车平稳舒适、经济效益好等优点。
The cleaning should not be done with steel wool, because of the likelihood of leaving small slivers of the steel or oil in the joint.
不应该用钢丝绒进行清理，因为细小的钢丝绒长条可能会残留或被油污粘在连接部位。
3d Systems recently set up a joint venture called MQast, which is an online provider of aluminium and stainless-steel parts produced using its machines.
3dSystems公司最近建立的一个叫做MQast的合资公司，在网上提供3 - D打印机制造的铝和不锈钢的物件。
The World steel Association, which represents most every major steel maker, asked this week that the European Union reject the proposed joint venture.
代表全球大多数主要钢铁生产商的国际钢铁协会(World Steel Association)，在本周要求欧盟(European Union)驳回这家拟建的合资公司。
Spacewalking astronauts inspected the joint several times before and even collected samples of the steel grit for analysis back on Earth.
太空行走的宇航员以前对接头曾进行过几次检查，甚至收集了钢屑样品回地球分析。
In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.
钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。
According to fatigue damage accumulation theory, test load of verified fatigue test on rail across beam and welded connections with integral joint of combined steel truss bridge was gotten.
依据疲劳损伤累积理论，确定了公轨两用钢桁桥轨道横梁与整体节点连接头验证性疲劳试验的试验荷载。
A vertical stiffening rib joint is suitable for rectangular steel tube column with smaller section to H-beam connection.
垂直加劲肋节点适用于柱截面较小的方钢管(矩形管)柱和H型钢梁节点。
Than the structure details contained in integral joint are analyzed, and the fatigue property of steel bridge integral joint is evaluated.
然后分析了钢桥整体节点所包含的构造细节，评价了钢桥整体节点的疲劳性能。
Intersecting joint has become the major one in steel tube structure, for its advantages in load-carrying capacity, steel-saving, simple construction, legerity, elegance and so on.
而相贯连接钢管结构更以其受力性能好、节约钢材、施工简单、轻巧优美等优点成为目前钢管结构中最主要的结构形式之一。
According to the specific circumstances of the project can also take charge of construction directly welded pipe, but must check a stainless steel tube joint can demand reinforcement.
依据工程的详细状况也可以采取主管上直接焊接支管的构造，但必需校核支不锈钢管衔接处能否需求补强。
Moreover, the test data were statistical treated with the method recommended by IIW and compared with fatigue strength of structural steel with identical joint type.
用国际焊接学会推荐的方法进行统计处理，并和相同接头形式结构钢的疲劳强度进行了比较。
This article discusses the joint-types of buckle-type steel tubular scaffold, and analyzes the experiments with load-bearing capacity and load deformation.
本文对扣件式钢管脚手架杆件接头型式问题，从承载能力，受荷变形方面进行了试验和分析。
A steel tubular intersecting joint is one of the main joints in steel tube structures.
钢管相贯节点是钢管结构中最主要的节点形式之一。
The connection between separator, furnace and back-end flue adopts stainless steel nonmetal expansion joint which can bear high temperature.
分离器与炉膛及尾部烟道之间的联接采用耐高温非金属膨胀节。
Ventilating tubes are made of galvanized steel plate, the gap between the joint of air tube and air well should be filled with incombustible materials.
通风管采用镀锌钢板制作，风管与风井连接处缝隙应用不燃材料填实。
The reliability of joint connection affects the holistic properties of steel structures.
节点连接的可靠性极大地影响着钢结构的整体性能。
The presence of hoop steel can effectively improve damage load of joint, but for the early cracked load is not obvious .
篐筋能有效提高其破坏荷载，但对初裂荷载提高不明显。
The deformability of under-matched X80 grade pipeline steel welding joint was studied through Finite Element Method.
采用有限元法对低匹配条件下x 80钢级管线钢焊接接头的变形能力进行了研究。
Being compared with the normalized steel, the quenched and tempered steel can led to a joint with higher strength and toughness.
正火态与调质态母材相比，后者可得到强韧性较高的接头。
应用推荐