This paper introduces the control system based on the STD-BUS industrial control computer for cupola melting process.
本文介绍了采用STD工业控制机的冲天炉熔炼过程控制系统。
The module structure of STD-BUS makes the system compact and convenient to repair and the time of development shorter.
用STD总线的积木式结构，可使结构紧凑，维修方便，研制周期短。
The application of STD-Bus ensures reliability-and availability of this system. The incorporation of high-level language to assembly language makes bench testing more efficient.
应用STD总线保证系统具有很好的可靠性和可用性，高级语言和汇编语言结合使得试验台测试更加有效。
This design and implementation of a double modular. fault-tolerant computer sys-tem interfacing to STD-BUS is presented for the industrial process oriented processor withhigh reliability.
本文论述STD 总线双机容错系统的设计与实现，该系统为工矿企业提供高可靠性的处理机模块。
Aiming at the complicated process control especially in the great disturbing producing course, STD bus industry control machine which has strong application can improve the control effect.
结论STD总线工业控制机对复杂的生产过程，特别是扰动大的生产过程，具有很强的适用性，可大大提高控制效果。
The position servo system it USES STD bus module type more CPU structure, mainly for economical nc machine tools.
本位置伺服系统它采用STD总线模块式的多cpu结构，主要面向经济型数控机床。
The paper adopts STD bus and modular structure and uses sequence identification wire selection technique to correctly locate the fault lines and indicate with language alarm, light and digitals.
采用STD总线和模块式结构，以时序鉴别法选线技术，准确定位故障线路，并发出语音报警、灯光及数字显示。
This paper deals with the automatic control system for batch distillation of oleoresin by STD bus microcomputer.
采用STD总线工业控制机对松脂间歇蒸馏系统实行自动控制。
The intelligent controller for boiler with the opening system structure is made up of STD as a bus and 80C31 as a core.
提出以STD为总线，以80C31单片机为核心构成开放式系统结构的智能锅炉控制器。
For the using of STD industry bus standard in the design, the system has high reliability, maintainability and adaptability to environment.
该系统采用STD工业总线标准设计，可靠性高，维修性好，环境适应性强。
STD bus embeded computer based general numerical protection system is presented here.
本文介绍了一种基于STD总线工控机的主设备保护通用系统的构成。
This article discusses the accomplishment of collecting and displaying temperature by using industrial PC and spot STD industrial bus system.
详细论述了用工业p c机加上现场s T D工业总线系统来完成对温度的采集和显示等。
The ARINC429, MIL-STD-1553B and CAN avionics bus interface communication system based on Field Programmable Gate Array (FPGA) are designed, which links different bus instruments.
采用现场可编程门列阵设计arinc 429,MIL- STD - 1553B航空总线接口通信系统，实现总线设备之间的互联。
STD bus is an industrial Computer control parallel internal bus. It is widely used in the field of real-time control.
STD总线是面向工业控制的计算机内总线系线，在计算机实时控制领域得到广泛应用。
This paper presents a STD bus double modular fault-tolerant computer system based on computer architecture.
从计算机体系结构观点，提出一个STD总线工控机二模容错计算机系统。
The composition, function, use , software design and key technology of MIL-STD-1553B data bus integration test system are described.
阐述了MIL-STD-1553B总线综合测试系统的组成、功能、用途、软件设计和关键技术问题。
The design of real-time control system for Redundant Robot with STD BUS is described in this paper.
本文介绍了STD总线构成的冗余度机器人实时控制系统的软硬件设计情况。
The research puts forward the methods of solving the problems by analyzing the limitations which MIL-STD-1553 B data bus protocol possesses in high speed data communication.
通过对美国军用标准MIL-STD-1553B总线协议在高速数据通讯中受到限制的分析，提出了现实解决办法。
The paper introduces application of STD Bus microcomputer in detection system for temperature of axle by using infrared sensor, and gives the system block diagram of hardware and software.
本文介绍了STD总线在红外轴温检测系统中的应用情况，给出了红外轴温检测系统的硬件组成和软件的设计框图。
The intersection controller is based on STD bus structure, its processor adopting MSC-89C51 monolithic computers of the INTEL company.
下位机的路口信号机基于STD总线结构，处理器采用了INTEL公司的MSC-89C51单片计算机。
Based on MIL-STD-1553B bus, the solving schemes to the key technology problems in avionics communication system are analyzed in this paper.
基于MIL- std—15 5 3b总线，本文分析了航空电子通信系统设计中若干关键性问题的解决途径。
This paper presents a method for data communication between IBM PC and control sys-tems under STD BUS in distributed control of computer systems.
本文通过一个实例，介绍以IBM-PC微机为管理机与STD总线控制下的模块式工业控制机之间的远距离数据通讯、原理及方式。
MIL-STD-1553B protocol is introduced in this paper. Then it is concluded about some basic principle on designing bus control.
本文介绍了MIL- STD - 1553 B总线协议，总结了总线控制设计的一些基本准则。
The tactical Data Systems of SH-60F are Dual, redundant mission computers, Digital data bus architecture (MIL-STD-1553B), Multi-function keypad access, Cockpit video displays.
战术数据系统采用两台多任务计算机、1553B数据链、多模式键盘、座舱视频显示等。
The opening structure of the STD BUS managed by a Z80 processor helps to build up a flexible and expansible data acquisition system.
由Z80微处理器管理的STD总线开放式结构具有灵活地扩充、方便地获取数据等特点。
Transmit fuction of heat was derived in this paper, A method of controlling characteristic with some band width and the structure of the STD BUS microcontroller w…
文中推导淬火炉的热传递函数，介绍了具有一定带宽的继电器特性控制方法和STD总线单片机系统的具体结构。
Transmit fuction of heat was derived in this paper, A method of controlling characteristic with some band width and the structure of the STD BUS microcontroller was pre…
文中推导淬火炉的热传递函数，介绍了具有一定带宽的继电器特性控制方法和STD总线单片机系统的具体结构。
The opening structure of the STD BUS managed by a Z80 processor helps to build up a flexible and expansible data acquisiti…
由Z80微处理器管理的STD总线开放式结构具有灵活地扩充、方便地获取数据等特点。
The opening structure of the STD BUS managed by a Z80 processor helps to build up a flexible and expansible data acquisiti…
由Z80微处理器管理的STD总线开放式结构具有灵活地扩充、方便地获取数据等特点。
应用推荐