The formulation of quasi-static reliability analysis for fixed offshore platform is established in this paper.
本文建立了固定式海洋平台结构系统准静态可靠性分析的公式体系。
The gear dynamic characteristic with vibration, noise, reliability transmission efficiency and used life was effected by gear dynamic and static precision.
提出了两者对齿轮传动动态特性中振动、噪音、可靠性、传动效率、寿命等的影响。
Reliability of a static stress-strength system depends only upon the interference of stress and strength.
静态应力-强度系统的可靠度仅与应力和强度的干涉有关。
Compared with the existing static power management scheme, this DPM scheme has some improvement in flexibility and reliability.
该方案与传统的静态电源管理方案相比,在灵活性和可靠性方面有了较大的增强。
Static analysis of Model LCJ1250 chain pumping unit indicates that the rather low reliability of the unit is due to the premature failure of the path chain caused by the action of lateral bending.
对LCJ1250链条抽油机的静力学分析与计算表明,由于轨迹链条承受侧向弯曲作用而早期失效,造成抽油机可靠性低。
Technology of high pressure and super high-pressure static sealing is one of key technologies that determine reliability of equipments.
高压超高压静密封技术是决定设备可靠性的关键性技术之一。
By using reliability design methods, minimal reliability of virgin static strength of flat ribbon-wound pressure vessels at pressure test is quantitative analyzed.
应用可靠性设计方法,对压力试验时扁平绕带式容器初始静强度的可靠度进行定量分析。
Based on the uncertain non - probabilistic convex models, the non - probabilistic reliability design of shaft on static strength is proposed.
基于不确定非概率凸模型,提出了轴静强度的非概率可靠性设计方法。
Accounting for reliability analysis of computer systems with hardware and software, a dynamic and static Fault Tree model is presented to analyze reliability of systems.
针对软硬件复合计算机系统的可靠性分析,提出了相应的模块化分解模型,采用动态和静态相结合的方法分析系统可靠性。
It was pointed out that the hot backup with static by-pass was the best working mode when the economy and reliability were considered at the same time.
提出在兼顾经济性和可靠性时,热后备+静态旁路方式是优选的工作方式。
The program of static strength reliability for large scale structures is generally introduced in the paper. The theory, the characteristics and the applications of this program are all presented.
本文全面介绍了大型结构静强度可靠性分析程序的原理、功能特点及应用实例。
This paper is concerned with the simplified steady state conditions of the system based on DC load-flow, which implies the reliability indices calculated are the measures about static loss of load.
本文涉及系统的静态约束条件,所计算的可靠性指标反映静态失负荷水平。
This paper is to provide a new design of hydraulic automatic leveling device, which is outstanding for it's stability, sensitivity, static accuracy and reliability.
本文介绍液压自动找平装置的新设计。该结构具有良好的稳定性、灵敏度、静态精度和可靠性。
In this paper, the reliability of cranks was analyzed with static, dynamic reliability theories separately. It was derived that there was a safety working time for cranks in point of fatigue strength.
以通用曲柄压力机的曲轴作为分析研究对象,应用可靠性理论对其静态、动态可靠性做了分析描述,从疲劳强度的观点给出了曲轴的安全工作区。
So it is important to analyze and build the reliability model, and the reliability of the system would be a important index for the static task scheduling and the dynamic task scheduling.
实时的得到系统的可靠性指标也是系统进行任务分配和重构的必要条件。
The influences of moving load on shear stress and bending moment are analysed by static characteristics, and the reliability of crane is studied with MonteCarlo method.
通过静态特性研究,分析了移动荷载对结构的剪力、弯矩和应力的影响,分别确定了剪力值最大、弯矩值最大和应力最大的位置。
By application the reliability design methods, the static strength of pressure spherical vessel is analyzed.
应用可靠性设计方法,对球形容器的静强度进行分析。
This paper studies the evaluation method of static strength reliability on 3-dimensional model for off-shore platform structure system.
本文研究了对三维模型的导管架平台结构系统静强度可靠性评估方法。
By using reliability design method, the reliability range of virgin static strength of spherical vessel was quantitatively analyzed under the most severe pneumatic and hydraulic test conditions.
应用可靠性设计方法,对压力试验时钢制薄壁内压圆筒形容器初始静强度的最小可靠度进行了定量分析。
It includes reliability design of wear resistance, stability, static stiffness and strength.
它包括耐磨性、稳定性、刚度、强度的可靠性设计。
By using reliability design methods, minimal reliability of virgin static strength of steel thin wall cylinder during pressure test is quantitative analyzed.
应用可靠性设计方法,对压力试验时钢制薄壁内压圆筒形容器初始静强度的最小可靠度进行了定量分析。
In this paper, static load experiments are illustrated and the reliability of CFRP reinforcement technology, used for reinforcing beam slab structure of large span bridge, is discussed.
文章结合对大跨度桥梁的梁板结构加固处理前后的静载试验,探讨了大跨度梁板结构应用粘贴碳纤维加固处理技术的可靠性。
By using this method, it is quantitative analyzed that reliability range of virgin static strength of spherical vessel at pressure test of all severe condit…
在最苛刻的气压与液压试验条件下,对球形容器初始静强度的可靠度范围进行定量分析。
In order to strengthen the stability and reliability of the system, lightningproof and static-free protection is improved and power trip protection circuits are added to to the design of senor power.
为了使系统更稳定可靠,提升了系统的防雷能力和防静电能力,并为传感器电源设计了传感器电源短路保护电路。
In this paper stochastic finite element method and SFEM-based reliability evaluation are developed for linear, nonlinear, static and dynamic problems.
本文针对工程结构中的随机因素,开展了线性与非线性,静力和动力问题的随机有限元法,及以此为基础的结构可靠性研究。
Reliability of the geological model was evaluated by history matching precision of oil reservoir numerical simulation. Static model was validated by dynamic model.
通过油藏数值模拟的历史拟合精度来评价地质模型的可靠性,由动态模型验证静态模型。
Secondly, a comprehensive weight is obtained, through which the static weight is amending by the dynamic weight, so that the rationality and reliability of the evaluation is improved.
其次,通过动态权重对静态权重进行修正后作为各状态量的综合权重,从而使得综合权重能更合理、准确的反映各状态量在评价中的相对重要程度。
Secondly, a comprehensive weight is obtained, through which the static weight is amending by the dynamic weight, so that the rationality and reliability of the evaluation is improved.
其次,通过动态权重对静态权重进行修正后作为各状态量的综合权重,从而使得综合权重能更合理、准确的反映各状态量在评价中的相对重要程度。
应用推荐