Software development methods like RUP and IBM RUP Service-Oriented Modeling and Architecture (SOMA) provide static process guidance that's published as HTML.
软件开发方法(如rup和IBM RUP面向服务的建模和体系结构(SOMA))可提供发布为HTML的静态流程指导。
The integrated static modeling of seat inventory control and overbooking for airline revenue management was studied in this paper.
本文研究航空运输收益管理的舱位控制和超售综合静态建模问题。
The modeling result based on UML is static description for the command, control, communication, intelligence (C3I) system, but the essence of C3I system is dynamic.
基于UML的C3I系统模型的设计结果是对系统的静态表述,而C3I系统的本质是动态的。
A new static correction using inverse modeling of first break is recommended here.
本文讨论了初至波反演模拟实现静校正的新方法。
This paper made some research on the modeling of some city bus body, FEM static intensity analysis and structure optimization.
本文对某型大客车进行有限元静态分析,探讨客车车身建模、强度分析与结构优化。
In view of the disadvantages of the present modeling methods for parachutes (suspension) systems, a novel method based on static equilibrium of the middle points is presented.
针对现有降落伞吊挂系统建模方法的缺点,基于中间点的静力平衡条件提出了一种新的建模方法。
The tool supports both static and dynamic evaluation of COAs by integrating influence nets with discrete event systems modeling techniques.
该工具集成了基于离散事件系统建模技术的影响网络,既支持对行动过程的静态评估,又支持对行动过程的动态评估。
Discuss some peculiarity and modeling mechanism of UML. The remote teaching evaluation system is designed from dynamic and static aspects.
讨论了UML建模的机制及特点,对远程教学评估系统从动态和静态两方面进行了分析和设计。
UML is a visual modeling language, defining all kinds of diagrams to describe the static structure and dynamic behaviors of software systems concisely from deferent aspects.
UML是一种可视化的建模语言,定义了多种视图,从不同侧面描述了软件系统的静态结构和动态行为。
Binary Decision Diagram and Markov method are applied in the DFT modeling of satellite key devices to process static subtree and dynamic subtree, respectively.
分别采用二元决策图及马尔科夫方法对关键设备的动态故障树模型中静态子树和动态子树进行分析。
The framework that I choose for the surveillance system is based on tracking. I only deal with static camera at this moment, so background modeling is a suitable way to detect the moving objects.
本文采用了基于跟踪的系统框架,并利用背景建模的方法,配合静止摄像机来检测视野中的运动物体。
The numerical modeling and analysis of static and dynamic strength and characteristics of the low floor city bus body structure are carried out in the paper, using a standard CAE software.
利用标准的CAE软件平台,对低地板城市客车车身结构进行数值建模和静动态特性分析。
Researches represented in this paper are the modal analysis and experimental modeling of the composite beam, and its static and dynamic stability.
本文研究了复合梁的模态分析结合实验建模方法,及其静力与动力稳定性问题。
The actual simulation and analysis, test results show that the simulation can be a true reflection of the power system dynamic and static performance, modeling is accurate.
经实际仿真和分析,试验结果表明该仿真能够真实反映电源系统的动、静态性能,模型设计是准确的。
The results show that the method of modeling and simulation is simple and has high credibility, which can reflect truly dynamic and static performance of the power system.
实验结果表明,该建模和仿真方法不仅简单易行,而且可靠性高,能真实反映电源系统的动、静态性能。
Specific application of UML (Unified modeling Language) in fault diagnosis expert system for a weapon system were set forth in detail. Static modeling and dynamic modeling are also built.
详细介绍了统一建模语言(uml)在某武器故障诊断专家系统中的具体应用,给出了系统的静态模型和动态模型。
Sequence diagrams and class diagrams are UML dynamic modeling and static modeling.
顺序图和类图是UML的动态建模和静态建模。
It can be applied not only to the static modeling of large systems, but also to dynamic modeling of large systems, and may simplify parameter estimation for large scale systems.
不但适用于建立大系统的静态模型,而且也适用于建立大系统的动态模型。
The unified modeling language (UML) is introduced briefly. The static and dynamic modeling mechanism of UML is researched.
对UML统一建模语言进行了探讨,对UML统一建模语言的静态、动态建模机制进行了研究;
In this case, this paper researched on the clustering of data for load modeling and the modeling of the static load.
本文针对这种情况,对建模数据的聚类分析和静态负荷建模进行了研究。
Based on the model of tire static vertical properties, the modeling of tire pure cornering properties by using modal parameters is studied.
在轮胎静垂直特性建模的基础上,探讨了利用轮胎模态参数对轮胎纯侧偏特性的建模。
This paper obtains static wind loads based on numerical wind tunnel modeling, and presents the effective theoretic method of wind induced dynamic responses and equivalent wind load analysis.
本文通过数值风洞模拟方法得到了各风向下穹顶结构的平均风压,尤其是给出了有效分析风激动力响应和等效风荷载的理论方法。
Present the RBAC model with this well-known modeling language UML , and specify the RBAC model with three views: static view, functional view, and dynamic view.
提出从静态、功能需求、动态观点来分析模型,并利用UML来表示基于角色访问控制模型。
Using UML to make the modeling of this system describes the static state structure and dynamic doing of this system.
本软件应用UML进行系统建模,描绘系统的静态结构和动态行为。
In the top-level modeling language, system model was divided into static structure and dynamic behavior.
在顶层建模语言中,把系统模型划分为静态结构模型和动态行为模型。
Multiresolution modeling, which is used to resolve the real-time rendering of large scale static terrain, has attracted growing interest at home and abroad over the last decade.
多分辨率建模作为解决大面积静态地形实时动态显示的手段,近年来在国内外得到普遍的重视和研究。
Combined with the static load test results, this paper creates trial pile modeling with FLAC3D software, and compare with the test results, the effect of simulation is viable.
结合静载荷试验结果,利用FLAC3D对试桩建模分析,并与现场试验结果进行对比,模拟结果可行。
Among the modeling factors, cable saddle effect on the static and dynamic characteristics of suspension bridge is the greatest.
在建模诸因素中,鞍座的模型化处理对悬索桥结构的静动态特性影响是最大的。
Marc, this paper deals with modeling of steady deformation process in multi-pass continuous rolling process with a 3D thermo-mechanical coupled FE model and static implicit algorithm.
采用三维热机耦合有限元模型和静力隐式算法,对多道次连轧稳态轧制过程进行模拟分析。
This paper presented a modeling of the static synchronous series compensator (SSSC) with multi-control modes for power flow analysis.
给出一个具有多控制功能的静止同步串联补偿器(SSSC)电压源模型。
应用推荐