The equipment should be able to accurately grind standard gear and index plate.
该设备还用于精磨标准齿轮和分度盘。
Generally, standard gear hobs are only used to machine gears with the same modul, pressure Angle as hobs themselves.
在一般条件下，标准齿轮滚刀只能加工与其模数、压力角相同的同制齿轮。
Vans Shoes have long been standard gear for skateboarders and beach boys, but these days they can be found almost anywhere.
万斯鞋早已被滑板和海滩男孩的标准装备，但这些天，他们可以找到几乎任何地方。
The standard involute cylinder gear is studied in this paper.
本文以标准渐开线直齿圆柱齿轮作为研究对象。
In addition, the CAD system includes some more utility modules, such as module of gear calculation of error of gear profile, module of gear measurement, module of looking up nation standard of gear.
另外，在齿轮CAD系统中还设计了齿廓误差计算、齿轮测绘及齿轮国家标准查询等一些具有较大实用价值的模块。
Bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use of a standard handwheel or chainwheel.
锥齿轮执行器提供手轮或链轮的垂直安装方式，或者用于由于空间限制无法使用标准手轮或链轮的应用环境。
Bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use a standard handwheel or chainwheel.
锥齿轮执行器为手轮或链轮提供垂直安装方式，也能够应用在由于空间限制而无法采用标准配置的手轮或链轮执行器的地方。
According to the new national gear standard, three deviation-measuring items must be included in the checkout of single gear: profile deviation, helix deviation and pitch deviation.
按照新的国家齿轮标准规定，对于单个齿轮必须检验三个偏差项目：齿廓偏差、螺旋线偏差和齿距偏差。
The dynamic contact finite element models of standard involute gear and modification gear are established in the software of ANSYS.
在ANSYS软件中建立了标准渐开线齿轮与修形齿轮的动力接触有限元模型。
The axles run in two-row self aligning ball bearings on the gear side, and a standard sealed ball race on the other end in the sprung axle box, both 12mm bore.
两轴运行的排调心方对球轴承齿轮，和一个标准就在轴箱弹簧的另一端密封球的比赛，两个12毫米口径。
HC Series, CNC Hydraulic Coupling gear indexing Tables (4th axis, non-lifting type), the standard model are every 1 and 5 degrees indexing (72d and 360d).
HC系列，液力偶合器齿轮数控分度表(第4轴，非提升式)，标准模型，每1和5度索引(72d和360d)。
The results show that a modification profile gear is in good condition that a standard one in lowering vibration and temperature aspects.
结果表明，修缘齿轮比标准齿轮在减振、降温等方面有明显改善。
The concept and grading method of the "martensitic grade" in the standard of "Metallographic test for Carburizing Auto Gear" were analyzed and discussed according to the experience and test results.
通过生产中的试验例证和检验结果，针对《汽车渗碳齿轮金相检验》标准中“马氏体级别”的概念和评级方法进行了分析和讨论。
The results are compared to those of the standard involute gear and proof that the bending strength of the composite profile tooth is higher than that of involute one.
结果表明，复合齿形齿轮比渐开线齿形齿轮具有更高的弯曲强度。
The research is mainly on the realization of Shell-Gear-Change-Lever's die-casting mold CAE and the establishment of standard mould bases.
本文重点进行了镁合金汽车零件压铸模CAE实现的研究和标准模架库的建立。
LANDING gear DESIGN: the standard tricycle gear also allows for excellent forward visibility while taxiing - an important consideration when operating the aircraft in off-airport environments.
起落架设计：标准的三轮车齿轮还允许能见度良好的向前滑行-一个重要的考虑因素时，操作环境的飞机机场外。
With the completion of standardization of gear oil, the usage will become more standard.
随着齿轮油标准化的完善，齿轮油的使用更加规范。
In this paper, a method of using single laser — beam spiral scanning to treat the tooth surface of standard spur gear is proposed.
提出标准直齿圆柱齿轮轮齿表面应用单激光束螺旋扫描的处理方法。
Bevel gear actuators provide vertical mounting of the handwheel or chainwheel, or can be used where space limitations prohibit the use of standard handwheel.
锥齿轮执行器为手轮或链轮提供垂直安装方式，也能够应用在由于空间限制而无法采用标准配置的手轮的地方。
Unlike a standard lever handle or gear operator which will remain in the last position, our assemblies ensure that the handle will always spring return to its original starting position.
与仍然留在最终位置的调节杆手柄或传动装置不同，我们的组装可以保证手柄一直自复至原始的位置。
Following the example of surplus joint of standard straight cylinder gear and axle, the article has explained that ANSYS Finite Elem…
本文以标准直齿圆柱齿轮和轴的过盈配合为例，说明了ANSYS有限元分析软件在过盈配合联接安全核算中是可以适用的。
In this thesis the author analyzes testing characteristic and demand for gear pump test, designs one computer testing system to test many kinds of gear pump based on the National Standard.
本论文分析了齿轮泵试验的测试特点和具体要求，根据有关国家标准及测试系统的设计规范，设计了一种适用于齿轮泵性能参数测试的计算机系统。
This method has been applied successfully to drawing up and carrying out the premodifying standard of tooth profile and axial profile of the transmission gear of Dong Feng Motor Corporatio…
该方法已应用于东风汽车变速器齿轮齿形、齿向预修正的标准中。
The technique is helpful to the study of gear-messprocess formulation of accuracy standard and improvement of gear machining.
这种新技术对齿轮啮合过程的研究、精度标准的制订和齿轮加工技术的改进有深远的影响。
Siemens FLD gear Units: Chinese standard of hard surface gear unit origins from FLD standard.
西门子弗兰德减速机：中国硬齿面减速机的标准源于弗兰德。
Process of parametric modeling of bevel gear with standard evolute tooth on PC based CAD system is presented.
提出实体参数化逆向造型设计的方法，介绍应用该方法开发圆锥齿轮三维实体参数化造型设计系统的过程。
Process of parametric modeling of bevel gear with standard evolute tooth on PC based CAD system is presented.
提出实体参数化逆向造型设计的方法，介绍应用该方法开发圆锥齿轮三维实体参数化造型设计系统的过程。
应用推荐