In construction practice, the transitional second stage cooling scheme has received good effect.
实践证明，二期冷却过渡方案已取得了较好的效果。
Optimal simulation of heat exchanger networks is made for two—stage cooling of wort in beer factory.
本文对啤酒厂麦汁二级冷却的换热器网络问题进行了优化模拟。
In this way, the shortcomings of single-stage cooling are made up and their advantages are mutually complemented.
这样就弥补了单段冷却各自的不足，实现了优势互补。
With double stage neutralization, double stage flocculation settlement, one stage vacuum filtration, and one stage cooling, the new process for treatment of waste water coming from the wate...
采用两次中和、两次絮凝沉降、一次真空过滤、一次冷却降温工艺处理水洗净化的污水，实现了封闭循环，达到了零排放。
The newly developed cooling system has a high efficient two stage radiator.
最新被开发的冷却系统拥有高效率的两阶段冷却。
Reasons and harm of higher gas temperature at the final cooling stage are analyzed and solutions are proposed.
分析了终冷段煤气温度偏高的危害及原因，并提出了处理办法。
The temperature is stage-wise controlled by adopting steam-coil heating and chilled-water cooling.
对于温度的控制是采用蒸汽盘管加热和冷冻水冷却的分程控制来实现的。
The influence factors of cooling stage for nonwoven composite thermoforming were analyzed from the aspects of material, mold cooling and processing parameters.
针对非织造复合材料模压成形的冷却过程，从材料、模具及成形工艺三方面探讨了影响制品冷却效果的因素。
Balanced pressure system containing gas sterilization of the packaging is vital, especially in the heating or cooling stage, the need for accurate pressure control.
压力平衡系统对内含气包装的杀菌至关重要，尤其是在升温或降温阶段，需要精确的压力控制。
Based on the variation of temperature in injection molded parts, the simulation of cooling takes consideration of the cooling stage of the part after ejection.
以注塑制品的温度变化为对象，考虑了注塑制品出模后的冷却过程。
Acoustic emission (AE) technique is used in situ to monitor the cracking and spalling of oxide films in isothermal oxidizing stage and air-cooling stage.
用声发射(AE)技术对氧化膜在恒温氧化阶段和随后空冷阶段的开裂与剥落信号进行了实时监测。
An optimum cooling control method of large volume concrete in the late stage was developed and was computer-programmed.
提出了大体积混凝土后期冷却的优化控制方法，编制了计算机程序。
The invention discloses a method for controlling cooling medium supplementation of an air-conditioner, which comprises the following: a stage of setting system pressure while leaving factory;
本发明公开了一种空调器补充冷媒的控制方法，包括：出厂时设定系统压力的阶段；
Presents research status of two-stage evaporative cooling and dew point evaporative cooling air conditioning technologies, and two new application examples of this technology.
重点介绍了两级蒸发冷却及露点蒸发冷却空调技术的研究状况，此外还介绍了水蒸发冷却技术的两个较新的应用实例研究。
Finally, the effect of the two-stage evaporative cooling system was present, which are both made of porous ceramic material will be more possible to access to the dew point.
最后提出多孔陶瓷间接蒸发冷却器与直接蒸发冷却器复合的二级蒸发冷却系统，其冷却效果更逼近露点。
The results show that the temperature reduces fast at first stage, because of the larger difference between blade and air. Then, the temperature reduction rate decreases slowerly, in cooling process.
结果表明：初始时刻叶片表面和环境温差较大，温降较快，随着冷却过程进行，温降速度变缓；
Results showed that ferrite net and lower hardness due to low cooling rate, coarser finish machining resulted in the fracture during earlier stage of rotary bending fatigue test.
结果表明，冷却不足使组织中出现网状及小块状铁素体，导致硬度偏低，加之磨削加工痕迹较粗是引起前轮毂早期断裂的原因。
It is shown from the results that the security and efficiency for LP last stage blade of air-cooling units can be obtained through adopting special profile, controlling reaction and incidences.
分析结果表明，采用专用强化叶型、控制反动度、控制攻角等方法可以有效保证空冷机组变工况安全高效运行。
Conclusion Heat-clearing and blood-cooling soup in treating psoriasis at progressing stage has better clinical effects and a function of improving blood viscosity.
结论清热凉血汤治疗银屑病进行期有较好的临床效果和改善血液黏稠度的作用。
This paper introduced a new hot-water absorption chiller, the two-stage integral chiller, specially designed for combined cooling, heating and electric power generation.
本文阐述了一种新型的热水型吸收式冷水机组，即热水两阶一体型吸收式冷水机组，并对其原理、热力计算优化等作了详细介绍。
Then the four-stage theory, the law of gas flow in vapor blanket and their influence upon the cooling rate and evenness of work pieces are discussed.
简单介绍了四阶段理论和蒸气膜内气体的流动规律及其对工件冷却快慢与冷却均匀性的影响。
Low-alloy high strength quenched and tempered steel suggested using one-stage rolling method, cooling rate should not be too low.
低合金高强度调质钢建议采用一阶段的轧制方式，冷速不宜过低。
The slab came back to be flat without opposite curling at the post stage of stacking cooling with heat preservation cover, and the residual stresses decreased.
堆冷过程中加盖保温罩能使铸坯在冷却后期恢复平直而不发生反向弯曲，并且铸坯内残余应力也变小了。
It is shown from the results that the security and efficiency for LP last stage blade of air-cooling units can be obtained through adopting special profile, co...
分析结果表明，采用专用强化叶型、控制反动度、控制攻角等方法可以有效保证空冷机组变工况安全高效运行。
This machine adopts double-press-bed design, that is, the completion of A-Bed glued into the Cooling Stage, B-bed operation can be glued.
本机采用双压床设计，即在A床胶合完成进入冷却阶段，B床便可以进行胶合作业。
This machine adopts double-press-bed design, that is, the completion of A-Bed glued into the Cooling Stage, B-bed operation can be glued.
本机采用双压床设计，即在A床胶合完成进入冷却阶段，B床便可以进行胶合作业。
应用推荐