Al-alloy moulded shapement with plastic-sprayed surface.
铸铝合金外壳压铸成型，表面喷塑。
Diecasted aluminium alloy shell with plastic sprayed surface.
铸铝合金外客，表面喷塑。
Diecasted aluminium alloy shell with plastic-sprayed surface.
铸铝合金外壳，压铸成形，表面喷塑。
Diecasted aluminium alloy shell with plastic-sprayed surface.
铸铝合金外客，压铸成形，表面喷塑。
Features Diecasted aluminium alloy shell with plastic-sprayed surface.
产品特点铸铝合金外壳，表面喷塑。
The housing is die cast in aluminum alloy, witu high voltage static plastic sprayed surface;
壳体采用铝合金压铸成型，表面高压静电喷塑；
The shell is made of diecasted Al-alloy or welded steel plates with plastic-sprayed surface.
铸铝合金或钢板焊接外壳，表面喷塑。
If so, the 45,000 gallons so far sprayed at depth may have done more good than all the spraying at the surface.
如果真是如此的话，相比起所有在海面喷洒的分散剂，那些45000加仑喷洒在深海的分散剂要有效得多。
The concrete remover directly sprayed to the surface of concrete.
直接把混凝土去除剂喷洒到有混凝土的表面。
She believes the material could be sprayed on any surface that is exposed to sunlight.
她认为该材料可喷洒任何表面上这是暴露于阳光下。
B, barrier type protective effect when the cold sprayed zinc coating is oxidation, will produce a layer of zinc salt in the coating surface to provide barrier protection.
屏障式保护作用当冷喷锌涂料被氧化时，会在涂料表面产生一层锌盐层来提供屏障保护。
Re-dissolve in thinner: When an acrylic lacquer is sprayed onto a surface it dries by evaporation of the thinner.
在稀释剂中再溶解：喷到表面的丙烯酸漆通过稀释剂的蒸发来干燥。
It also can be sprayed on the surface of concrete members as a curring agent, and have a good shrinkage reducing effect.
也可以作为一种养护剂喷涂到混凝土构件与制品的表面，同样具有很好的减缩效果。
The results indicate that the plasma sprayed wollastonite coating has a rough surface and lamellar structure including some pores and microcracks.
结果表明：等离子喷涂硅灰石涂层具有粗糙的表面和层状结构，涂层内部存在一些气孔和微裂纹。
The spray-cooled mold is a new type of mold for continuous casting, The cast strandis cooled by water sprayed into the surface of copper plate with a special designed nozzle in the newmold.
喷淋结晶器是一种新型的结晶器，它是用特殊的喷嘴将水喷淋到结晶器的铜板表面上进行铸坯冷却的。
Usage: the product will be sprayed evenly in the glass surface. Using a window or arrangements. such as dry cloth to wipe.
用法将本品均匀喷在玻璃表面，用揩窗器或干布等擦拭即可。
The surface of the sprayed articles must be clean and dry.
喷件的表面必须是洁净和干爽的。
The dissertation carried out the reaction kinetics analysis of the sprayed carrier surface, and put forward the photo-catalytic purification rate equation under ideal state.
本文对喷涂载体表面进行了反应动力学分析，提出了系统理想状态下的光净化速率方程。
It is proposed to get the piercing plug sprayed with a plasma coating in a bid to enhance its surface properties, and thus prolong its service life, and cut down the operation costs as well.
提出采用在顶头上喷涂等离子涂层的方法来提高穿孔顶头表面性能，从而提高其使用寿命，降低生产成本。
Obviously, borrowed soil sprayed on slope surface tends to slide or collapse under actions of rainwash, seepage, gravitational force, earthquake, etc.
显然，由于雨水冲刷、渗流、重力、地震等因素的影响，被喷播到边坡坡面上的客土存在力学稳定性问题。
It is indicated that modifying wear resistance of titanium alloy by the flamed sprayed welding could improve effectively wear resistance of titanium alloy surface.
试验结果表明，采用火焰喷焊技术对钛合金表面进行耐磨处理，可以有效地改善表面的耐磨性。
Foam coat layer consisting of fine metal particles similar to matrix is sprayed and diffusely sintered on the surface of the artificial joint.
多孔人工关节是采用与基材相同的细小金属珠粒，以烧结或扩散焊的方法，固定在关节特定的表面上。
Zinc-alloy has low melting point and is easy to spray forming which can be sprayed directly on the production surface to fabricate a mould with high precision by arc spraying.
锌合金熔点低、喷涂成形性能好，可以直接在原型表面进行电弧喷涂快速制造模具，提高模具的制造精度。
This product can also clean any part of the motorcycle, directly sprayed on the surface, then wipe dry with a cloth or rinse water, or clean as new.
本品还可清洗摩托车任何部位，直接喷洒于表面，然后用布抹干或用水冲洗干净，即光洁如新。
Should first bonding wire brush to remove sediment from the bottom surface, and then immediately sprayed coating job.
应先用钢丝刷刷去除粘结底层表面的沉积物，然后立即喷涂工作涂层。
Cleaning hard surface can first be sprayed on a soft cloth to wipe.
清洁硬质材料表面可以先喷洒在软布上再进行擦拭。
The lenses are available in single vision, varifocal and sun-lens forms. They need to be sprayed with a chemical solution every week to keep the fog-repellent surface working.
这种镜片有单光、变焦、太阳镜三种形式，使用时需要每周在镜面上喷洒一种化学溶剂，才能保持防雾表面持续有效。
Enclosure is cast with aluminium alloy, surface is sprayed with plastic, fine outline.
铸铝合金外壳，压铸成型，表面喷塑，外形美观。
Enclosure is cast with aluminium alloy, surface is sprayed with plastic, fine outline.
铸铝合金外壳，压铸成型，表面喷塑，外形美观。
应用推荐