A high pressure airless spray technique is introduced on principle.
介绍了高压无气喷涂的原理。
The spray technique used in the powdering process is simple and effective.
采用喷雾成粉工艺，工艺简单、工艺性好。
Carbon nanotubes have been obtained by the floating catalyst method using the feedstock spray technique.
采用浮游催化法喷雾进料技术制备碳纳米管。
Counter-flow spray technique for the treatment of the rinsing water containing pyrophosphates in Cu- Sn-Ni alloy plating is described.
电镀焦磷酸盐铜锡镍废水由“常流水”清洗方式改为反喷淋清洗方式。
The principle and characteristics of are spray technique and its use on the spot were reviewed. Gap in this field at home and abroad was compared, and some reasonable suggestions were presented.
评述了电弧喷涂技术的原理、特点及其在生产中的应用情况，比较了国内外这方面的差距，提出了一些合理化的建议。
Air plasma spray technique was used to gain a thin and porous anode layer of intermediate temperature solid oxide fuel cell SOFC by taking charcoal active powder as pore-forming agent in this paper.
采用大气等离子喷涂技术，以活性炭粉作为成孔材料，获得了薄且多孔的中温固体氧化物燃料电池s OF C阳极层。
The phase change thermography technique is a wind tunnel test technique to spray some phase change paint on the aircraft surface for measuring heat distribution in a large area.
相变热图试验技术是通过在飞行器表面喷涂具有一定相变温度的相变涂料来进行大面积热测绘的一项风洞试验技术。
The spray seeding technique was used in the vegetation restoration on stone slope in recent years, which had a good effect.
近年来，国内外将喷播技术用于石质边坡的植被恢复，取得了较好效果。
Technique of lycopene extraction and microencapsulation in a wall system consisting of gelatin and sucrose by spray dring, and mass detection method of lycopene microencapsulation were outlined.
对番茄红素的提取工艺和以明胶与蔗糖作为壁材喷雾干燥制备番茄红素微胶囊的工艺进行了探讨。
Technique of micro encapsulation in a wall system consisting of compounds such as gelatin and sucrose by spray drying, and mass detection method of lycopene micro encapsulation were outlined.
对番茄红素的提取工艺和以明胶与蔗糖作为壁材喷雾干燥制备番茄红素微胶囊的工艺进行了探讨。
This paper mainly discussed the spray anchor reinforcement technique in road slope engineering application, and many problems puts forward corresponding measures.
本文主要讨论了喷锚加固技术在道路边坡工程应用，并且许多问题提出了针对性的措施。
The vacuum hot oil spray drying technique of transformers is introduced. The plan to be carried out is given. The testing results and data are analyzed.
介绍了变压器真空热油喷淋干燥方法，提出了具体实施方案，并对测量结果及试验数据进行了分析。
Technological process of regeneration of seal rib and profile on tri-lobe Roots blower made in Germany is introduced comprehensively using the technique of electric brush plating & hot spray welding.
介绍了综合运用电刷镀、热喷焊技术对德国制造的三叶罗茨鼓风机密封筋、型面进行“再生”的工艺过程。
Meanwhile, the result show that model precision can meet needs of light draft technique process control based on the equipment and spray state in good condition.
结果表明，在设备与喷淋状态保证的前提下，模型精度可以满足轻压下工艺过程控制的要求。
Spray deposition is a new technique which can be used to manufacture rapid solidified materials in large dimensions.
喷雾沉积是制取大体积快凝材料的一种新工艺。
Objective To review the application and progress of spray drying technique in the field of traditional Chinese medicine.
目的阐述喷雾干燥技术在中药领域中的应用及进展。
Comparing with the existing rapid spray tooling technology, the proposed technique not only shortens the technical flow and reduces the process time, but also improves the mould dimension precision.
与现有的熔射快速制模工艺相比，该工艺不仅缩短了工艺流程和加工时间，还提高了制模精度。
The paper introduces the difficulties of roller spray welding technique such as controlling for distortion, keeping for layer evenness and dimension of roller diameter.
就轧辊喷焊的技术关键问题：变形控制，涂层均匀性的控制，喷焊后辊子外径尺寸控制及轧辊的组焊工艺等，作以介绍。
The fabricating technique of thin solid films deposited by pulsed laser ablating spray is a new technique.
激光烧蚀溅射沉积薄膜技术是一项新的固体薄膜制造技术。
The technique process of plasma spray and its PC hardware interface and software program are introduced in this paper.
本文介绍了等离子弧喷焊的工艺过程及采用PC控制的硬件接口和软件编程。
Some novel chilling technique such as vacuum chilling, spray chilling, delay chilling and ice temperature chilling was also reviewed.
对肉类冷却新技术如真空冷却、喷淋冷却、延迟冷却和冰温冷却进行了综述。
This paper introduced the principle of the metal spray coating technique and its application of manufacturing RIM polyurethane foaming model with a satisfactory result.
介绍了金属喷涂技术的原理，并将这一技术用于制造rim聚氨酯发泡模具，取得了满意的效果。
Abstract: the spray anchor reinforcement technique is a fine performance and application in the practical work, a wide range of road slope engineering support technology.
摘要：喷锚加固技术是一种性能优良并且在实际工作中应用很广泛的道路边坡工程支护技术。
In this paper a fluidization technique and a spray drying method were presented that may combine evaporation, drying, and granulation of sodium benzoate solution in a fluidized bed all at once.
本文介绍一种用流态化技术与喷雾干燥相结合的方法将苯甲酸钠溶液在流化床内完成蒸发、干燥与造粒。
The thin shell parts for special materials was manufactured by using plasma spray forming technique, which could protect fragile and expensive parts that might not be sprayed directly.
采用等离子喷涂成形法制造某些特殊材料的薄壁件，以保护那些不允许直接进行等离子喷涂的脆弱零件及贵重零件。
In this paper studies were undertaken to get microencapsulated lycopene with storage stability and water dispersibility by means of spray drying technique.
本研究采用喷雾干燥法对番茄红素进行微胶囊包埋，以期改善番茄红素的不稳定性和水不分散性。
There are spray bottle technique, transparent, frosted, translucent color, screen printing, bronzing, hot silver.
瓶身工艺上有喷涂、透明、磨砂、半透明调色，丝印、烫金、烫银等。
Therefore the mode of spray and enhancement can greatly reduce the induction time of forming the hydrate, it is an effective technique for promoting the hydrate.
因此，喷雾强化方式可以大大缩短水合物形成的诱导时间，是一种行之有效的促进水合物形成的技术。
The invention belongs to the technique field of traditional Chinese medicine, in particular to a spray for external use for curing rhinitis and the preparation method thereof.
本发明属于中药技术领域，涉及一种治疗鼻炎的外用喷剂及其制备方法。
The invention belongs to the technique field of traditional Chinese medicine, in particular to a spray for external use for curing rhinitis and the preparation method thereof.
本发明属于中药技术领域，涉及一种治疗鼻炎的外用喷剂及其制备方法。
应用推荐