And the optimum electric arc spray parameters were obtained through comprehensive experiment.
通过正交综合实验，确定了较合适的喷涂工艺参数。
Among spray parameters, nozzle type, size and wind speed are those most closely relating to drift.
在影响喷雾飘移的因素中，喷头类型、喷头的大小(流量)和风速都有重要影响。
The calculating method in this paper can be used to preestimate spray parameters of pressure-swirl atomizer.
本文所提出的计算方法可用于离心式喷嘴雾化参数的预估。
The orthogonal experiments were conducted for the profile modeling spray with different spray parameters combination.
仿形喷雾试验按照不同的喷雾参数组合采用正交试验的方法进行。
It indicated that formulations, spray parameters and sampling methods are the main factors that led to changing of initial residues.
可见农药剂型、喷雾参数和采样方法成为影响农药原始沉积量的主要因素。
The influences of the spray parameters on the electrical and optical properties of the ATO films were evaluated and analyzed in details.
并进一步研究了喷雾热解法中薄膜的形成过程和工艺参数对薄膜微观结构和性能的影响。
Spray drying technology in large-scale production of spirulina platensis SCSpowder is elucidated and the effects of operational parameters on qualities of algal powder are analysed.
阐述了海水螺旋藻工厂化生产中喷雾干燥的工艺流程，分析了运行参数对藻粉品质的影响。
One kind of VAE redispersible polymer powders were prepared by the method of spray drying with fit technical parameters.
通过控制适当的工艺参数，采用喷雾干燥法成功制备了VAE类可再分散聚合物粉末。
Introduce the working principle, structure and parameters of a kind of spray mini - dryer specially developed and researched for laboratory.
介绍一种专为实验室开发研制的微型喷雾干燥机的工作原理、结构型式、性能参数等。
The effect of different diesel parameters such as spray impingement mode and fuel supply advanced Angle and injection opening pressure on the performance and emissions is compared and analyzed.
比较分析了柴油机不同参数，包括喷雾碰撞形式、供油提前角、启喷压力等对第三代伞喷燃烧性能和排放的影响。
The working principles, characteristics and process parameters of single head air spray gun, air electrostatic spray gun and high-speed rotated cup type electrostatic spray gun were introduced.
介绍了单头空气喷枪、空气静电喷枪、高速旋杯式静电喷枪各自的工作原理、施工特点及影响喷涂质量的工艺参数。
The basic requirements and the practical value range of the key parameters in the optical measurement of diesel fuel spray are analyzed.
分析了柴油机喷雾场光学测量中关键参数的基本要求和取值范围与测量系统的主要误差来源及计算公式。
The metallurgical parameters of the conventional recirculating water cooling and the spray cooling molds have been calculated respectively.
并数值计算了普通循环水冷结晶器与喷淋冷却结晶器的冶金参数。
The experimental results are useful for rational selecting parameters of containment spray system of PWR.
实验结果可用于合理选择压水堆安全壳喷淋系统参数。
This paper introduces the principle, Technology and technical parameters of handling and reinforcing the defect of foundational pile by the high spray method.
本文详细介绍了高喷法处理和加固基桩缺陷的原理、工艺和技术参数。
The paper analyse some controlling parameters of sprinkler water droplets: (1) maximum spray momentum the maximum spray momentum is relevant to volume flux and flux coefficient.
本文详细介绍了喷淋液滴的一些动力学参数：(1)液滴动量喷淋的最大动量和体积流量与流量系数有关。
According to the law, it will make the cooling ability of external-cooling equipment to regulate the interrelated parameters of external-cooling spray gun.
按此规律调控外冷喷枪的相关参数，将使外冷设备的冷却能力得到充分发挥。
On this basis, the paper established a model for predicting the plasma spray coating quality under different process parameters.
在此基础上建立预测模型，对不同工艺参数下等离子熔射层进行质量预测。
The influence of injection parameters including the nozzle diameter and injection timing on the spray and combustion process of dimethyl ether (DME) was investigated.
对发动机喷油系统参数对二甲醚(DME)喷雾燃烧过程的影响进行了实验研究，包括喷孔直径和喷油提前角对喷雾燃烧过程的影响。
This was due spray system parameters is not very reasonable, affected the spray dust effects.
主要原因是由于喷雾系统参数不尽合理，影响了喷雾降尘效果。
Finally, innovative use of spray made rapid alkaline liquid and hydrogen sulfide gas in the idea, and also the relevant parts of the sprinkler system and selection of parameters were calculated.
最后还创新性的提出了采用喷洒碱性液体快速中和硫化氢气体的思想，并且还对喷洒系统中相关部件进行了参数计算及选型。
The paper presented the application of rotary spray and pressure spray in largescale production of white carbon. It also presented process layout, hot air disperser and typical operated parameters.
根据生产实践经验，介绍离心喷雾和压力喷雾干燥设备在大型白炭黑生产线中的应用，介绍几种不同的流程布置，热风分布装置及系统典型操作参数。
Design of energy - saving spray booth and paint baking room for large automobile and relative parameters thereof are introduced.
介绍了大型车辆节能喷漆室和喷烤漆房的设计及其相关参数的计算。
Technology parameters on spray sprinkling solution distribution for heap leaching of the uranium ore are recommended.
推荐了雾化布液堆浸该矿石的工艺参数。
It was verified that the design method and the value of parameters were reasonable and reinforcement effect of powder-spray pile in test section was good.
通过上述试验验证了设计方法及采用参数的合理性，同时表明该试验段粉喷桩加固效果良好。
The key of the fine spray fire extinguishing technology is the design of the nozzle parameters.
细水雾灭火技术的关键在于喷头参数的设计。
Atomization Angle and uniformity are two key parameters of fuel spray nozzle.
喷雾锥角和喷雾均匀度是燃油喷嘴的两个重要指标。
The characteristic curves of spray nozzles made at home and abroad were analyzed. The more rational parameters are provided for domestic plants to produce spray nozzle.
分析了国内外喷嘴的特性曲线，为国内厂家生产喷嘴提供了更为合理的参数。
Impact of welding parameters on the meso-spray transfer in Al pulsed-MIG welding has been studied in the Al pulsed-MIG welding experiment based on meso-spray transfer self-adapting control.
运用亚射流过渡自适应控制思想进行了铝脉冲MIG焊工艺试验，研究了焊接参数对铝脉冲MIG焊亚射流过渡的影响。
Impact of welding parameters on the meso-spray transfer in Al pulsed-MIG welding has been studied in the Al pulsed-MIG welding experiment based on meso-spray transfer self-adapting control.
运用亚射流过渡自适应控制思想进行了铝脉冲MIG焊工艺试验，研究了焊接参数对铝脉冲MIG焊亚射流过渡的影响。
应用推荐