Johannes Kopf from Microsoft and Dani Lischinski from the Hebrew University built the algorithm by blending a number of approaches, including pixel analysis and spline curves.
来自微软的约翰·内斯科夫和希伯来大学的达尼·里奇斯开发了这个混合多个方法的算法，包括像素分析和样条曲线。
The fuzzy decision method of fuzzy mathematics is employed in the application of spline function in objective analysis.
本文在运用样条函数进行客观分析时引用了模糊数学中的模糊决策方法。
This dissertation establishes numerical methods in structural analysis on the basic of variation principle, finite member element method, spline function, etc.
本文利用变分有限元法、样条函数等，提出了薄壁箱梁结构分析的数值理论和方法。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
Through the analysis of mechanic model of spline function, the paper proposed a simple, convenient and efficient sheet assimilative method based on finite element to calculate earthwork volume.
在分析样条函数的力学模型基础上，提出了一种根据地面标高利用薄板比拟法计算土方量的简便、实用、高效的方法。
Objective to relax linear assumption of explanatory variables in general linear model and explore more-dimensional spline regression analysis model.
目的放宽经典线性模型中的多个解释变量的线性假定和探讨多维样条回归分析模型。
The spline function is used in the analysis of free vibration problem of plates on elastic foundation.
本文提出一种用样条函数分析弹性地基板自由振动的新方法。
This paper presents beef freshness spline regression model according to beef sample, and carries out regression analysis for this model.
针对牛肉样本建立了牛肉新鲜度样条回归模型，并对该模型进行了回归分析。
Based on the analysis to the current spline forming process at home and abroad, the spline tube forming process was studied and the cold extrusion process was suggested.
本文在研究国内外花键生产的基础上，对内外空心花键管的成形进行了工艺性分析，提出了花键管的冷挤压工艺。
It follows from analysis that quasi - spline with arc triangle sectional profile has the advantages of easy to be machined and convenient to be measured.
通过分析证明，以圆弧三角形为截面廓形的类花键具有加工和测量方便等优点。
Starting with the multiresolution analysis (MAR), a method to constructing orthogonal spline wavelets is introduced and the exponential decay of them is discussed in this paper.
从多分辨分析（MAR）出发，介绍了正交样条小波函数的构造方法，并讨论了小波函数的衰减性。
Objective To improve on classical least squares estimate of regression analysis and explore nonparametric smoothing spline regression analysis.
目的改进回归分析的经典最小二乘估计方法和探讨光滑样条非参数回归分析方法。
The formulas of CAM profile are established through the use of spline function and a method is given for kinematic and dynamic analysis of the cams in this article.
本文应用三次样条函数建立凸轮廓线方程，并进行机构的运动和动力分析。
In this paper, for strength analysis of cylindrical shells, model of ringed spline finite super - element is given.
提出一环状样条超级单元用于圆柱壳的分析。
The verification tests of cold extrusion process and fatigue life of a spline shaft show that the analysis results agree well with those of testing.
经花键冷挤压工艺试验和疲劳试验验证，分析结果和试验结果吻合很好。
This paper proposes a procedure to determine the response spectra by spline function analysis using acceleration record as input.
本文应用样条函数方法拟定了一个由加速度记录快速计算结构震动反应谱的方法。
Wu Xiangding, Zhan Xuzhi. The applicability of spline function fitting in dendroclimatological analysis. Acta Meteorologica Sinica, 1991,49(1):100-103.
[吴祥定，湛绪志。样条函数拟合在年轮气候学分析中的可适用性。气象学报，1991，49（1）：100-103。]。
This paper introduces three method of machining technique, technique analysis and measuring for internal spline with reversed taper teeth.
本文介绍三种倒锥齿内花键的加工工艺，工艺分析和测量方法。
Basic equation of photoelastic stress analysis by Chen (1962) is adopted; and a cubic spline function suitable for processing of photoelastic data is derived.
文中采用陈至达(1962年)的光测应力分析基本方程，并导出适合于光弹性数据处理的三次样条函数。
The displacement variational principle was used to develop the spline finite member element method for buckling analysis of thin walled members with shear lag effect.
根据势能驻值原理 ，提出在横向荷载作用下薄壁杆件稳定分析的样条有限杆元法。
In this paper, over the analysis of forming mode selection and forming process of spline tube, the pressure analysis and calculating method during extr...
本文通过对花键筒的成形方式选择和成形过程分析得出对不规则截面管件挤压变形过程中力的分析和计算方法。
A three dimensional upper bound analysis technique for calculating the extrusion pressure of a spline shaft was presented in this paper.
本文给出了花键轴开式整体凹模挤压时挤压力计算的三维上限分析法。
Finite element analysis data of the end component of PMLSM was interpolated using cubic spline function at incompletely coupled zone of the secondary and primary.
在初、次级不完全耦合区域，采用样条函数对永磁直线同步电动机磁阻力的端部分量的有限元数据进行插值。
The spline element analysis is applied in space domain and the state space precision method is used in time domain.
对空间域采用样条元计算，对时间域采用状态空间精细法。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
应用有限条方法分析多格式斜桥，编制了相应的计算程序，进行有机玻璃模型试验，讨论了这种结构受力性能。
This article is tried to design and calculate the complex heat screen of vacuum resistance furnace by the analysis method as a substitution for the conventional spline fit method.
本文试图建立一种分析法代替传统采用的试凑法，对真空电阻炉的复合热屏蔽进行设计、计算。
An analysis on the cold extrusion process and a technological experiment were made for the two spline ends of a slim drive shaft.
细长传动轴两端花键头进行了冷挤压加工分析与工艺实验。
The main content of this thesis is lateral buckling analysis of thin-walled structures with irregular cross section by transformed 63 spline finite member element method.
本文主要分析了具有不规则横截面形状的薄壁结构在横向荷载下的稳定问题。
Based on analysis of quadratic spline interpolation, the shortest quadratic spline interpolation is discussed. Furthermore, golden section method is put forward to solve this problem.
在分析了样条函数插值基础上，提出最短二次样条插值问题，并提出用黄金分割法解决该问题。
Based on analysis of quadratic spline interpolation, the shortest quadratic spline interpolation is discussed. Furthermore, golden section method is put forward to solve this problem.
在分析了样条函数插值基础上，提出最短二次样条插值问题，并提出用黄金分割法解决该问题。
应用推荐