Powder high-speed steel, to provide users with more choices.
粉末高速钢等，为用户提供更多之选择。
Different mold steel and high speed steel models, the corresponding price difference is very large.
不同的模具钢和高速钢的型号，对应的价格差异也是非常的大的。
Twist drills are usually made of high-speed steel, although carbide-tipped drills are also available.
虽然也有硬质合金刀尖的钻头，麻花钻一般用高速钢制成。
Introduced the properties, main manufacture methods and application of casting high speed steel rolls.
着重介绍铸造高速钢轧辊的性能特点、主要制造方法和在轧钢行业中的应用。
Laser build-up welding had shown good wear resistance, increased by 42.6% than that of high-speed steel.
激光堆焊层体现出良好的抗磨性能，比高速钢的耐磨性提高42.6%。
The paper deals with YG6 coating on fore-and-aft face of high speed steel tool with high power CO_2laser.
利用高功率CO_2气体激光器对高速钢刀具前、后面进行YG6表面涂敷；
The valence electron structures and covalent bond energy have been calculated for cobalt high speed steel.
计算了含钴高速钢的价电子结构与共价键能。
The results indicate that pulse magnetization can significantly prolong the lifetime of the high speed steel tools.
结果表明，脉冲磁化处理能够明显地提高高速钢刀具寿命。
Incomparision to tile traditional power hacksaw blade made of high speed steel, this blade was very cheap and tough.
与传统的高速钢锯条相比，这种锯条的韧性大大改善，而成本大幅度降低。
All normal designs are made of high speed steel quality material no. 1.3343 and can be supplied in cobalt alloyed too.
所有的普通设计都是选用高速钢材质，钢号：1.3343并可提供钴合金材料。
The influence of high-speed steel carbide appearance to hot-working technology and die & mold life was stated in detail.
详细叙述了高速钢碳化物形貌对热加工工艺及模具寿命的影响。
The coating technology is one of the most effective methods to improve the cutting performance of high-speed steel tools.
涂层技术是改善高速钢刀具切削性能的最有效方法之一。
The wear of the unmagnetized and magnetized high speed steel material are compared in the wear between pin and disk text.
通过销盘的磨损对比试验，对进行了磁化处理的与未作磁化处理的高速钢材料作了耐磨损性能的研究。
The modes of tool damage include plastic deformation on cutting edge of high-speed steel tool and tipping of ceramics tool.
刀具破损的主要形式为高速钢刀具切削刃塑性变形和陶瓷刀具的崩刃。
The present paper has briefly described the basical technologies of sintered high speed steel products and their properties.
本文简述烧结高速钢制品的基本生产工艺及其性能。
This method is launched in 1970, the special steel industry, quickly promoted to improve the performance of high speed steel.
这种方法是在1970年推出后，特殊钢行业，迅速晋升为提高高速钢的性能。
The overall design, layout, parameters and structure of high speed steel wire armoring strander for fiber optic cables are presented.
主要介绍新型光缆钢丝铠装高速成缆机的总体设计、布局、参数、结构特点。
Picture analysis method is used to measure and analyze the carbide distribution in the high-speed steel shaped by radial forging machine.
用图相分析方法测定并分析了由精锻机锻造高速钢的碳化物分布状态。
Upon characteristics analysis of high speed steel, forging technology of high speed steel and sequential heat treatment have been introduced.
在分析高速钢特性的基础上，介绍了高速钢的锻造工艺及其锻后热处理。
Compared with the high carbon high speed steel without modification treatment, the impact toughness is increased by 73.6 %, with same hardness.
变质后高碳高速钢辊环在硬度不变的情况下，冲击韧性提高了73.6 %。
This article in the light df the main wear type of high speed steel tool and common hard alloy tool, design 'es a new kind wear resistance coating.
本文针对高速钢刀具和普通硬质合金刀具的主要磨损形式，设计了一种新型的刀具耐磨涂料。
Ferrovanadium can be used as additive in smelting high-intensity-low-alloy steel, high speed steel, tool steel, stainless steel and permanent magnet.
钒铁用作炼钢的添加剂，生产高强度低合金钢、高速钢、工具钢、不锈钢及永久磁铁等。
Special heat treating process will bring latent properties of high speed steel with Co into full play and obviously improve its strength and toughness.
含钴高速钢采用特定的热处理工艺处理，可充分发挥材料的潜在性能，显著提高其强韧性。
The wear mechanism of high vanadium high-speed steel is combined micro-cutting and fatigue wear with carbide particle breaking and peeling off under stress.
高钒高速钢干滑动磨损机理为显微切削和疲劳磨损的复合，并且有应力作用下碳化物的碎裂及脱落。
The results indicate that pulse magnetization can improve the wear of high speed steel, and meanwhile it prolongs the lifetime of high speed steel material.
实验结果表明：脉冲磁化处理能够提高高速钢材料的耐磨损性能，可以显著地提高高速钢材料的使用性能。
The process of making high speed steel by direct alloying of scheelite, molybdenum oxide and V2O5 is calculated and analyzed by thermodynamics and kinetics.
对用白钨矿、氧化钼和V2O5直接合金化冶炼高速钢进行了热力学和动力学的计算和分析。
This series machine is suitable of ferrous, nonferrous metal and some kinds of non-metal materials with hard alloy, high capacity and high speed steel tools.
本机床主要适用于高速钢、硬质合金及陶瓷刀具切削加工黑色金属、有色金属及部分非金属零件的内外圆柱面、内外圆锥面、沟槽、平面。
The energy absorptivity and hardness of knife surface are obviously increased using graphite coating during laser thermal treatment for high speed steel knife.
采用石墨涂层，对高速钢刀片进行了激光热处理，显著地提高了刀片表面的能量吸收率和硬度。
The energy absorptivity and hardness of knife surface are obviously increased using graphite coating during laser thermal treatment for high speed steel knife.
采用石墨涂层，对高速钢刀片进行了激光热处理，显著地提高了刀片表面的能量吸收率和硬度。
应用推荐