Finally, a high performance PMLSM speed servo system is designed with IP speed controller.
最后，结合IP速度控制器设计了一高性能永磁直线同步电机速度伺服系统。
Disturbance is the main factor which influences the performance of the ac speed servo system.
干扰是影响交流速度伺服系统性能的主要因素。
From the lowest to the highest speed, speed servo motor can smooth running, torque ripple is small.
从最低转速到最高转速，伺服电机都能平滑运转，转矩波动小。
This paper presents a new adaptive fuzzy control scheme and its application to speed servo control for a quadruped robot.
本文提出一种新的模型参考自适应模糊控制器，并应用于步行机器人关节速度伺服控制。
This paper introduces the use of the linear motor in high speed servo feed unit directly and analyzes the characteristic.
介绍了直线电动机在高速机床伺服进给中的应用，分析了直线电动机用于进给驱动的特点。
This driver can communicate externally with RS485 bus and accomplish speed servo and position servo with the scheduled parameters.
该驱动器通过RS485总线与外界通信，可按照预定参数完成速度和位置伺服。
LI Qing. Research on Pneumatic Manipulator Speed Servo Control System [d]. Kunming: Kunming University of Science and Technology, 2010.
[4]李庆。气动机械手速度伺服控制系统的研究[d]。昆明：昆明理工大学，2010。
It is shown in the experiment that this object function converges rapidly, and could improve both the learning speed and robustness of such speed servo control system.
通过实验研究，表明该方法收敛速度快，学习能力强，并提高了系统的鲁棒性，证实了其在电机速度控制中的有效性。
The speed servo system which has no servovalve is controlled by a electromagnetic clutch. This device is simple in construction and it has high resistance to contaminant.
非阀式速度伺服是由电磁离合器作控制元件的电液伺服系统，它具有结构简单、抗污染力强的优点。
The 3-axis flight table is an important device and a typical high performance position and speed servo system used in the hardware-in-the-loop simulation of flight control system.
三轴飞行模拟转台是用于飞行控制系统半实物仿真的高性能位置跟踪和速度跟踪的一个重要设备。
This paper introduces the connection of speed servo adjusting unit and the throttle, simplifies the control circuit of the manual throttle and offers two practical methods of speed testing.
介绍伺服调速及油门机构的连接，简化手油门控制电路，给出两种实用的测速方法；
Servo motor is of high precision, speed and care with milliseconds, the disadvantage is that capital is relatively rare.
伺服电机利益是精度高，速度快，照料以毫秒计算，缺点是本钱相对名贵。
Experiment results indicated that the servo controller possesses the characteristics of good speed control performance and anti-load-disturbance ability.
实验结果表明，所设计的伺服驱动控制器具有良好的速度控制能力和抗负载扰动能力。
And that parallel mode requires the servo system to have good speed stability to ensure invariable output of speed.
平行式要求伺服系统具有良好的速度稳定性，保证恒定的速度输出。
And the static and dynamic systems of Servo system affect positioning speed, positioning accuracy and machining accuracy of numerical control machine tool directly.
而伺服系统的静态、动态性能直接关系数控机床的定位速度、定位精度和加工精度。
Experiments show that the two-loop Servo System has good performances in speed and position control.
实验表明：双闭环的永磁数字交流伺服系统拥有很高的速度和位置控制性能。
Three group of servo motor finish the function of precise counting, stacking and transfering out while high speed running.
由三组伺服电机共同构成高速运行下精确计数堆积输出功能。
Servo motor has small start frequency, can quickly from the lowest revolution accelerated to the rated speed.
伺服电机有很小的启动频率，能很快从最低转速加速到额定转速。
The designed grey feedback linearization control system was implemented in an indirect field-oriented induction servo motor to track speed commands.
设计的灰色反馈线性化控制系统可以实现间接磁场定向感应伺服电机来跟踪速度给定。
This paper mainly introduces the IC automatic machine through using Delta B2 series servo, greatly improves the speed and precision of control system.
本文主要介绍了IC自动排片机通过采用台达B2系列伺服，大幅度地提高了系统的速度和控制精度。
The algorithm also combines correlation matching with the control characteristic of servo system, selects the matching area more reasonably, and thus enables a faster servo control speed.
算法还将相关匹配与伺服系统的控制特性结合起来进行考虑，更加合理地选择匹配区域，从而允许更快的伺服控制速度。
The combination of speed control and location control of servo driver realized the accurate control of crane's location and steeve's movement.
采用伺服驱动器的速度控制和位置控制相结合的方法实现天车定位和吊臂运动的精确控制。
There is an optimal spindle servo feeding speed(SFS) at which the MRR is the highest.
存在一个较佳的主轴伺服进给速度使得工件的加工速度较高。
This paper describes performance indexes, structure features, design method and experimental investigation of electrohydraulic servo motor with super-low-speed, wide speed control and high precision.
本文介绍了超低速、宽高速、高精度电液伺服马达的性能指标、结构特点、设计方法和试验研究。
Anolog speed signal VEL from SDC is also taken as speed feedback signal to form speed loop in gun servo system.
SDC输出的模拟速度信号VEL还可以作为速度反馈信号以构成火炮伺服系统中的速度回路。
Based on analyzing the dynamic characteristics of vertical servo motor of a NC vertical grinder, the effect of the parameters of speed loop on the servo system was studied.
分析了数控立式磨床垂直进给轴的机电动态特性，研究了伺服系统的速度环参数对伺服系统性能的影响。
A high precision and high performance servo-drive system needs a rotating speed estimation algorithm which has high accuracy, fast response and high resolution in a wide range.
高精度高性能的伺服驱动系统需要在宽范围内有精度高、响应快及分辩率高的转速估计算法。
The application of PLC and servo to the device for high speed plastics pipe shearing is introduced.
介绍了可编程控制器(P LC)和伺服系统在高速管材剪切装置中的应用。
The application of PLC and servo to the device for high speed plastics pipe shearing is introduced.
介绍了可编程控制器(P LC)和伺服系统在高速管材剪切装置中的应用。
应用推荐