Direct control of torque over the motor speed range is provided by the drive, which helps the motor and drive generate torque levels high enough to cycle the press back to ready position.
直接控制扭矩而不是电机转速范围，可以使得电机和变频器产生足够高的扭矩使得压机可以回复到原来的位置。
When driving on expressways, the driver must control his or her speed within the range of the posted maximum and minimum speed.
司机在高速公路上开车时必须将自己的行车速度控制在标牌规定的最高限速与最低限速之间。
When driving on expressways, the driver must control his or her speed within the range of the posted maximum and minimum speed limit.
司机在高速公路上开车时必须将自己的行车速度控制在标牌规定的最高限速与最低限速之间。
In industrial process control, it is at times necessary to adjust a motor's speed over a wide range.
在工业过程控制中，有时需要在广泛的范围内来调整电动机的速度。
Based on this method, the accurate control pulses are generated from the PC timer and used for driving the step motor to realize a wide range speed control smoothly.
基于该方案，通过截用PC机系统的定时器资源产生精确定时的控制脉冲，使步进电机实现宽广范围内的速度平滑控制。
It shows that the MRCVT has a series of merits: easy to control, low control power, wide range of regulation, and stable speed regulation, etc.
试验证明，MRCVT调速具有控制简单，控制功率小，调节范围宽，调速平稳等一系列特点。
It can realize the wide range control of speed and position and has excellent capabilities.
它能实现宽范围的速度和位置控制并具有优良的性能。
Due to its excellent control performance, wide speed range, precise control, Vector control technology has a hot spot of research for control technology of TPAM.
矢量控制技术由于其优良的控制性能、较宽的调速范围，精确的控制能力，成为了当今TPAM控制技术中研究的热点。
Experiment results indicate that control system have wide range of speed regulation, good dynamic and static behavior.
实验结果表明，系统调速范围宽，控制性能好。
As for bang-bang control, DTC has poor performance in low speed range. ISR and DSFO can not completely avoid the dependence upon rotor parameters.
但DTC由于砰-砰控制影响了低速性能，ISR和DSFO仍然避免不了对转子参数的依赖。
The sensorless of induction motor field-oriented control employing stator voltages and currents has difficulty in estimating rotor flux in the low-speed range.
在低速范围内，对无传感器感应电动机进行矢量控制时用定子电压和电流推算转子磁通是比较困难的。
Because of the DC speed governor driving system stability, wide speed control range, easy automatization and it's widely used in new built factory.
由于直流调速拖动系统平滑稳定，调速范围宽，因此，容易实现自动化，并在新建厂矿企业广泛应用。
Simulation results show that the EKF can give the accurate estimation of rotor speed and flux in all drive range, and the proposed control scheme processes the perfect dynamic and static performance.
仿真结果表明EKF可在整个调速范围内进行高精度的转速和磁链估计，控制系统具有优良的动态和稳态性能。
Type 37 fire control system training detector possesses such functions as simulating laser range finding, detecting if tracing and speed - measuring is accurate and conducting second aim.
研制的“37火控系统基础练习检测器”具有模拟激光测距，检测跟踪测速是否准确，实施二次瞄准等一系列适应新式火控系统训练需要的功能。
To pump as an example, affecting its speed range, energy-saving effect of some of the major factors, was symptomatic of analysis and, on this basis that the scope of application of Frequency Control.
以水泵为例，针对影响其调速范围、节能效果的一些主要因素，进行了对症分析和探讨，在此基础上指出了变频调速的适用范围。
Practices indicate it has advanced design, high performance-cost ratio, and wide range of speed, reliable operation, and better portability. The electric control system can be applied to...
应用实践表明，该系统设计先进、性能价格比高、调速范围大、运行可靠、可移植性强，可以广泛应用于各种类型卧式镗铣床的电气控制系统改造。
Practices indicate it has advanced design, high performance-cost ratio , heavy range to transfer speed , reliable operation , and better portability. The electric control system ca…
应用实践表明，该系统设计先进、性能价格比高、调速范围大、运行可靠、可移植性强，可以广泛应用于各种类型的卧式镗铣床的电气控制系统改造。
The damper will have the best effect in minimizing the vibration within the specified range at all working speed by using on-off control method.
根据这一特性，提出用开关控制能使阻尼器具有最佳的减振效果。
The result shows that the dynamic performance of twelve-section control scheme is superior to that of six-section control scheme, especially in the low speed range.
结果显示，十二分区方案在动态性能方面，特别是在低速区，要明显优于六分区方案。
These motors are designed to accommodate a wide range of applications including direct drive servo systems, recorder drives, holding torque and high torque-low speed control systems.
这些电机的设计，以适应范围广泛的应用，包括直接驱动伺服系统中，记录器的驱动器，保持转矩和高转矩低速控制系统。
Due to the large torque ripple of direct torque control in low speed range, a torque Angle adjustor based on fuzzy neural network and PI control was adopted to improve the control effect.
针对直接转矩控制低速时转矩脉动大的问题，采用基于模糊网络与PI控制结合的转矩角调节器来改进控制效果。
Practices indicate it has advanced design, high performance-cost ratio, and wide range of speed, reliable operation, and better portability. The electric control system can b...
应用实践表明，该系统设计先进、性能价格比高、调速范围大、运行可靠、可移植性强，可以广泛应用于各种类型卧式镗铣床的电气控制系统改造。
Practices indicate it has advanced design, high performance-cost ratio, and wide range of speed, reliable operation, and better portability. The electric control system can b...
应用实践表明，该系统设计先进、性能价格比高、调速范围大、运行可靠、可移植性强，可以广泛应用于各种类型卧式镗铣床的电气控制系统改造。
应用推荐