Measured results of soil specimen deformation are given for comparison between traditional method and the technique presented in this paper.
给出了对于实际土样采用常规测量方法和数字图像测量方法测量结果的比较。
The digital camera is used to collect the pictures of specimen deformation. The digital image measurement of specimen deformation in triaxial test based on digital camera is put forward.
将数码相机用于土三轴试样变形的图像采集，提出了一种基于数码相机的土三轴试样变形的数字图像测量方法。
The specimen deformation and the crack morphology were studied. After comparing with the fracture of flame chamber of aerojet, the most suitable size and shape of specimen notch has been determined.
研究了试样的变形和裂纹的形态，并与航空喷气发动机的火焰筒的断裂特征进行了比较，找到了最佳的试样缺口的形状和尺寸。
The formation of granular relief and martensite on the specimen surface seems to be reversible during deformation under loading.
加载变形过程中，样品表面形成的马氏体和晶粒状浮雕具有可逆性。
Maximum impact force is the greatest impact force (in inch-lbs) applied that did not cause visible damage or deformation to the test specimen surface.
最大撞击力是指应用在测试样品表面上但没有出现肉眼可观测到损伤或变形的最大撞击力(单位：英寸磅)。
Symmetrical deformation mode of the specimen was converted into asymmetrical pattern beyond peak stress.
在应变软化阶段，试样的变形由对称性向非对称性转变。
The inner maximum resistance force and the maximum stress of the specimen decreases as the deformation temperature increasing.
在形变速率相同的条件下，随变形温度的升高，试样内部最大形变抗力及最大应力呈下降趋势。
The specimen irradiated by intense laser generates distinct plastic deformation, and the profile of axial cross section of specimen after shocking is similar to a coniform figure.
结果表明：在强激光冲击下，试样发生显著的塑性变形，变形后轴截面形状为类圆锥形；
New on old concrete adhesive specimen and whole specimen are done by nonlinear module in ANSYS in which large deformation and contact are simultaneously considered.
采用ANSYS非线性模块，同时考虑工作过程中大变形、接触等多种非线性因素，对新老混凝土粘结试件和整体试件的复合受力进行数值模拟。
In unloading process the direction of friction will convert to prevent restoration of shear deformation between the fissures, which results in the residual deformation in the specimen.
卸载时摩擦力的作用方向会发生改变，并抑制裂隙面之间滑移变形的恢复，使岩样内部产生残余变形。
Deformation of the specimen without wetting mainly occurs at the initiation stage, while the wetting deformation of the specimen mainly occurs at the acceleration stage.
未湿化试样的变形主要发生在启动阶段，而湿化试样的变形则主要发生在加速阶段。
Crack closure of base metal is caused by the residual plastic plastic deformation remaining in the wake of an advancing crack tip and is not as significant as in welded specimen.
而在管线钢基材中裂纹闭合现象较小，闭合原因是裂纹尖端尾部的残余塑性变形。
Higher lateral deformation and Poisson's ratio as well as negative volumetric strain can be reached for higher pore pressure even though axial strain of specimen is lower.
较高的孔隙压力，即使试样的轴向应变为低，可以达到较高的横向变形和泊松比，以及负体积应变。
The load -step curve and the stress distribution figures during the deformation and failure process of the concrete specimen were presented.
计算机模拟给出了试件的载荷-加载步曲线和混凝土试件的破坏过程的应力分布图。
Considering the deformation of the specimen is different on the different load condition, the compression sensibility is different either.
考虑到受力情况不同，试样的变形不同，CFRC的压敏性也会有所不同。
P98 Data for stress-strain diagrams are usually obtained by applying an axial load to a test specimen and measuring the load and deformation simultaneously.
通常，对试件施加平轴荷载，并且同时测量荷载和变形，这样就获得了应力—应变图的数据。
Designing and manufacturing a experimental setup of viscous adhesive stress tensile test, the influence of viscous adhesive stress on the deformation of sheet specimen was studied.
自行研制了粘性附着力拉伸实验装置，研究了粘性附着力的大小及其影响因素，建立了粘性附着力计算模型。
Designing and manufacturing a experimental setup of viscous adhesive stress tensile test, the influence of viscous adhesive stress on the deformation of sheet specimen was studied.
自行研制了粘性附着力拉伸实验装置，研究了粘性附着力的大小及其影响因素，建立了粘性附着力计算模型。
应用推荐