Other uses for this high power diode laser bar are as a direct source for various materials processing applications including cladding, welding, heat treating and brazing.
该高能半导体激光器的其他用途包括，用作各种材料处理应用的激光光源，这些处理应用包括覆层、焊接、热处理和铜焊接。
The primary application for the diode laser bar is as a pump light source for use in solid-state lasers for medical and industrial applications.
半导体激光器主要用做医用和工业用固体激光器的光源泵。
The Source-Measure Unit can also test other diode parameters, including forward voltage drop and breakdown voltage.
源-测量单元还可以测量其它的二极管参数，包括正向电压降和击穿电压。
An ideal PV cell can be modeled as a light-induced current source in parallel with a diode.
理想PV电池的模型可以表示为一个感光电流源并联一个二极管。
With high photoelectric rate. The diode side-pump laser source is good stability and long life time.
电光转换效率更高，功耗低，输出激光能量稳定。半导体侧面泵浦激光器使用寿命更长。
The outline covers the component parts of a light emitting diode (LED) light source such as LED modules, LED Arrays, power sources and control circuitry.
这个指导纲要涵盖了LED光源的零部件，诸如LED模块，LED阵列，电源和控制电路。
In many test applications, the voltage and light output of the diode can be measured simultaneously using a fixed source current value.
在很多测试应用中，二极管的电压和发出的光可以利用大小固定的电流源同时测出来。
The significant progress of high power solid-state laser, fiber laser, super high efficiency diode source and relay mirror system are reviewed and discussed.
评论和讨论了高功率固体激光器、光纤激光器、超高效率二极管源和中继镜技术的重大进展。
The series resistor can be much smaller since it is only needed to prevent overload of the voltage source and damage to the diode if the capacitor becomes short-circuited.
这时串联的电阻器可以小得多，因为其作用只是防止电压源过载以及电容器短路时损坏二极管。
The Laser diode optical source is designed as a lab and manufacture testing equipment.
该激光器光源是专为实验室和生产测试使用而设计。
In sinusoidal phase modulating laser diode interferometer, the main error source is the variation in output light intensity of light source.
在半导体激光正弦相位调制干涉仪中，光源输出光强的变化是测量误差的主要来源。
In this circuit, some measures are adopted, such as making constant current source as a rectifying load. It makes the voltage drop of the rectifying diode maintain a constance.
该电路采取以恒流源为整流负载等有关措施，使整流二极管的正向导通压降为一常数。
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
高效率红源彩色设备均采用砷化镓磷化镓磷化物的橙色发光二极管。
Third LED advantages conductor light-emitting diode (LED) as a third-generation semiconductor lighting source.
三led优点导体发光二极管(LED)作为第三代半导体照明光源。
To design and manufacture a constant-source with adjustable amplitude value and the test system, and to realize the examination of zener diode voltage drift parameter, is very important.
设计制作出一个幅值可调的恒流源及其测试系统，实现稳压二极管电压漂移参数的检测，至关重要。
It USES a laser diode as light source and a linear photodiode array to record the light-scattering band, which correlated to the surface roughness.
它利用半导体激光器为光源，光电二极管阵列接收与表面粗糙度具有对应关系的散射光带。
A tunable GaAlAs diode laser is used as a chirp signal source, the distance is detected by calculating the beat frequency.
由可调谐半导体激光器产生一个啁啾信号，通过测量拍信号频率计算距离。
The lampcover adopts the toughened glass manufacturing, and the light source is the light source with high brightness LED's light emitting diode;
灯罩采用钢化玻璃制造，光源以高亮度LED发光二极管为光源；
It is usually implemented with a resistor or current source, a capacitor, and a "threshold" device such as a neon lamp, diac unijunction transistor, or Gunn diode.
通常由一个电阻器或者电流源，电容器和一个“阀门”装置，如氖灯、两端交流开关、单结晶体管或者耿式效应二极管来实现。
Based on confocal configuration, a laser-induced fluorescence detector using laser diode double-pumped solid-state laser (LD-DPSSL) as excitation source is described.
以半导体激光泵浦-固体激光器为激发光源，采用共聚焦光学结构，研制了一种小型化激光诱导荧光检测器。
An intelligent coated plate thickness measurement system based on a semiconductor laser diode as light source and a CMOS image sensor is introduced.
介绍了一种以半导体激光器为光源，以新型CMOS面阵图象转换器件为传感器的智能型覆铜板测厚系统。
Superluminescent diode(SLD)is an idea light source for fiber optic gyroscopes which can meet the requirements of the light source for high output power, low coherence and good stability.
光纤陀螺用光源要求输出功率高、相干性低、稳定性好。超辐射发光二极管（SLD）是能满足这些要求的理想光源。
My paper is including two parts: the design and implement of the external cavity laser diode (ECLD) current source and the research of network data disaster recovery system.
课题工作内容主要分为：外腔半导体激光器用恒流电路的设计与实现和基于网络的远程数据备份容灾方案两大部分。
The measuring system USES the laser diode as the light source and the infinite objective of optical system.
系统以半导体激光器为光源，成像系统采用物方远心光路。
From the experiment we can see that the response velocity of the light source is quite quick and it can replace tunable laser diode completely in some experiment system.
通过实验验证，该光源响应速度快，在部分场合已完全能替代可调谐激光器。
Laser diode is used usually as light source in miniature measuring instrument and communication instrument because of its small volume, high efficiency, simple structure and low price.
小型测量仪及通讯仪器通常采用激光二极管作为其光源，这是因为它具有体积小、效率高、结构简单和价格便宜等优点。
High power laser diode array is mainly used as the pumping energy source for solid state laser.
大功率激光器阵列的重要应用是泵浦固体激光器。
The light source is a light emitting diode (LED).
光源是轻的发出二极体。
The light source is a light emitting diode (LED).
光源是轻的发出二极体。
应用推荐