The introduced mathematical model takes into account the action of the kinetic fractionation effect in super saturation environment at ice surface as liquid and solid phases coexist in mixed cloud.
文中介绍的数学模型考虑了混合云中液、固相共存时以及冰面过饱和环境下稳定同位素的动力分馏效应。
The elimination of void and oxide film removing model under solid state and the one under the coexistence solid and liquid phase are successively developed on basis of the above results.
并在试验的基础上，先后建立了振动条件下固态孔洞闭合和氧化膜破碎模型和固液共存状态下孔洞闭合和氧化膜破碎模型。
The introduced mathematical model takes into account the role of the kinetic fractionation effect in a supersaturation environment at the ice surface as liquid and solid phases coexist in mixed cloud.
介绍的数学模型考虑了混合云中液、固态共存时以及冰面过饱和环境下稳定同位素的动力分馏效应。
A model for the rise velocity of a single deformed bubble in liquid solid fluidized beds was formulated, based on the analysis of the forces acting on a bubble.
以气泡在上升运动过程中的受力分析为基础，建立了描述单个变形气泡在液-固流化床中上升速度的理论模型。
Since the interaction between solid phases and liquid phases is included in the momentum equation of liquid phases in terms of sources or sinks, the physical process is clearer in the model.
该模型把固相与液相间的相互作用以源(或汇)的形式归结到液相的动量方程之中，因而物理过程比较明确。
Using the revised quasiregular model, we obtained the equations of the liquid-solid phase equilibrium curves of a binary system according to thermodynamic theory.
利用改进的准正规模型，根据热力学理论获得了决定二元液-固相平衡的曲线方程。
Filtered process mathematical model includes material balance equations of solid filter material and liquid sewage respectively.
污水过滤过程的数学模型包括固体滤料相和液体污水相的物料衡算方程。
An expanded liquid model (ELM) for solid solute solubility in supercritical fluids was proposed based on the assumption that the supercritical fluid was considered as an expanded liquid.
将超临界流体视为膨胀液体，根据溶液理论，建立了计算溶质在超临界流体中溶解度的膨胀液体模型。
This success in simulating non-instantaneous reaction strongly manifests the capability of the model in describing the behavior of some solid-liquid reactions.
这一形式简单、使用极方便的数学模型在非瞬间反应系统的成功应用，更有力地证明其对某些类固液反应的适用性。
Flow behavior of liquid and solid phases was simulated in an inversed fluidized bed based on two-fluid two-phase flow model.
基于欧拉·欧拉双流体模型，数值模拟倒置液固流化床内液固两相流动行为。
The seismic analysis of liquid storage container is conducted by finite element method for transient dynamic fluid-solid coupling model.
应用流体固体动力耦合统一分析模型的有限元法，进行了储液池的抗震分析。
A model was developed for the kinetics of the liquid-solid phase reactions in a intermittent reactor, such as the leaching process of stibnite in the antimony hydrometallurgy.
本文针对目前湿法炼锑工艺过程研究的需要，对类似于辉锑矿浸出过程的液-固间歇式多相反应动力学模型进行了推导。
Mass transfer mechanism in leaching rapeseed by TPS had been analyzed and a liquid-liquid-solid leaching model was found.
对TPS浸取菜油和硫甙的传质机理进行了分析，建立了菜油和硫甙的液-液-固浸取数学模型。
In this model, the characteristics of pseudo-homogeneous solid-liquid two-phase flows have been considered in the expression of wave propagation speed and also during treating with flow resistance.
本模型的压力波波速表达式和阻力的处理方法都体现了伪均质固液两相流的特点。
Five-selection simple cubic lattice, self-avoiding walk, and nearest interaction model were used to construct the homopolymer adsorption model on the solid-liquid interface.
模拟中采用五选择简单立方格子上的自回避行走和最近邻相互作用模型；
This paper presents a thermodynamic model for predicting the liquid-solid phase equilibrium.
论文提供了一个预测液固相平衡的热力学模型。
In this paper, a thermodynamic model of gas? Liquid? Solid phase equilibration is proposed on the basis of the equation of state and solution theory.
采用状态方程和溶液理论相结合，建立气—液—固三相相平衡热力学模型。
One of them is pure evaporation heat transfer model in the extended thin film region near the triple-phase contact line of vapor-liquid-solid at lower input heat flux.
一种是较低热负荷下的单一的微槽内三相接触线附近薄液膜区域中薄液膜的高强度蒸发换热机制（纯蒸发模式）；
The present model improved the solutal distribution approach at the solid-liquid (S/L) interface, which made the change of solute more consistent with the actual transport.
模型处理溶质场计算中固液（S/L）界面处溶质的分配过程，使浓度场的变化和实际的传输过程更加相符。
The utility model discloses a liquid-filled convex lens which is an optical convex lens formed by transparent liquid filled in a convex hollow transparent solid outer shell.
充液凸透镜，是用透明液体充进凸型空心透明固体外壳中而形成的一种光学凸透镜。
The geometric model of Cross Flow Swirl Solid-Liquid Separate equipment with High Efficiency and mesh generation strategies were built with GAMBIT software.
以GAMBIT软件为工具，建立符合错流涡旋式高效固液分离装置实际流场机构的几何模型与网格划分策略。
The utility model is especially suitable for aeration mixing devices for liquid material with suspended solid particles.
本实用新型特别适用于含有悬浮固体颗粒的液体物料的通气搅拌设备中。
The utility model comprises a machine base, a driving motor which is arranged on the machine base, an electric controlled box and a solid-liquid filtration and separation device.
包括机座、安装在机座上的驱 动电机、电控箱和固液过滤分离装置。
The utility model provides a side leakage gourd ladle, which not only can dip out liquid, but also can separate the liquid from solid.
本实用新型提供一种既能舀取液体，又能使液体与固体分离的侧漏瓢。
The utility model discloses a compound separator, which is suitable for recovering micronized solid from crude liquid and waste liquid in food, chemical production plants.
本实用新型是一种适用于食品、化工生产厂自原液或废液中回收微细固体的复合分离器。
The flow of oil and sand mixture in horizontal wellbore is a special flow model of solid-liquid two phase flow in pipe flow actually.
含砂原油在水平井水平段中的流动是液固两相沉降性浆体水平管流的一种特殊形式。
The utility model is applicable for the solid-liquid separating operation of sewage water and feces of the enterprises just as foodstuff, animal breeding and the like.
本实用新型适用于食品、畜禽养殖等企业污水、粪便的固液分离作业。
The utility model is applicable to the liquid-solid and liquid-liquid separations field in industries such as petroleum, chemical engineering, environmental protection, medicine, and foods.
本实用新型适用于石油、化工、环保、医药、食品等行业的液—固、液—液分离领域。
The modified two-flux model has significant effects on the selection of optical depth and catalyst concentration in liquid-solid-gas photoreactors.
完善后的双通量模型对于气、液、固三相光催化反应器的光学厚度设计和催化剂浓度选择具有指导意义。
The modified two-flux model has significant effects on the selection of optical depth and catalyst concentration in liquid-solid-gas photoreactors.
完善后的双通量模型对于气、液、固三相光催化反应器的光学厚度设计和催化剂浓度选择具有指导意义。
应用推荐