The primary application for the diode laser bar is as a pump light source for use in solid-state lasers for medical and industrial applications.
半导体激光器主要用做医用和工业用固体激光器的光源泵。
High-power laser diode-pumped solid-state lasers are replacing flashlamp-pumped solid-state lasers and are widely used in industries.
大功率激光二极管抽运固体激光器正逐步取代传统的灯抽运固体激光器，已广泛应用于工业领域。
Electro-optical efficiency is an important parameter for all-solid-state lasers.
电光效率是全固态激光器的一个重要参数。
The other work is the theory study on the relaxation oscillation of solid-state lasers.
另一方面的工作是对固体激光器的弛豫振荡的理论研究。
So the high power solid-state lasers have a broad application prospects in the laser processing.
所以，高功率固体激光器在激光加工中有着很广泛的应用前景。
Gentle zones were found in all output power curves of laser-diode (LD) side-pumped solid-state lasers.
在所有激光二极管(LD)侧面抽运的固体激光器的输出功率曲线中都存在一个平缓区域。
The use of two-rod or multi-rod connection technology can effectively improve the solid-state lasers output power (energy).
而利用双棒或多棒串接技术能有效地提高固体激光器的输出功率(能量)。
In this paper, a method for measuring thermally induced losses in highpower end-pumped solid-state lasers has been proposed.
本文提出了一种测量端面泵浦固体激光器热致损耗的方法。
Effect of thermal lensing is the main obstacle of getting high power and good beam quality in laser diode (LD)-pumped solid-state lasers.
在高功率激光二极管抽运固体激光器中，热效应已成为获得高输出功率和高光束质量的最大阻碍因素。
In this paper, some new developments of slab geometry solid-state lasers are reported and the comments on their prospects and problems are made.
本文报道了板条状几何结构固体激光器研究的一些新的进展，对板条激光器的前景和存在问题作了评述。
In this paper, misalignment sensitivity of resonators for slab solid-state lasers has been studied. Curves with sensitive change have been given also.
本文研究了板条状固体激光器光腔的失调灵敏度。给出了其相应的变化曲线。
The report emphases on face-pumped solid-state lasers(or slab solid-state lasers), diode laser pumped solid-state lasers and laser material processing.
面泵浦固体激光器（即板条式激光器）、半导体二极管泵浦固体激光器和激光加工是这份报告的重点。
It has been shown, that the slab geometry solid-state lasers offer the possibility of achieving the kilowatt power level as well as having good beam quality.
分析表明，板条状几何结构固体激光器提供了达到千瓦级功率水平同时又保持良好光束质量的可能性。
In this paper a theoretical model for passively mode-locked solid-state lasers is presented, which combines the fluctuation model with the quasi-steady-state analysis.
本文对被动锁模固体激光器提出一个把涨落模型和准稳态解析方法结合起来的理论模型。
High power solid-state lasers could output laser which the wavelength in the IR could be transmitted by fiber, and the structure stability is good, the peak power is high.
高功率固体激光器可输出能用光纤传输的近红外波长的光束，且结构稳定性好，峰值功率高。
The key challenge for developing high-average power solid-state lasers is thermomechanical distortions caused by waste heat deposited in the gain medium by optical pumping.
激光介质的热效应是高平均功率固体激光器面临的最大挑战，采用薄片激光介质是解决热效应的有效手段之一。
The basic structure and the fundamental principle of semiconductor saturable absorption mirrors (SESAM) that are used for passive mode-locking solid-state lasers are introduced.
介绍了半导体可饱和吸收镜(SESAM)的基本结构及使用半导体可饱和吸收镜被动锁模固态激光器的基本原理。
The principle, application and exploratory development of semiconductor saturable absorption mirrors for passive Q-switching of solid-state lasers and fiber lasers are emphasized.
着重介绍了固体激光器和光纤激光器调q用半导体可饱和吸收镜的原理、研制方法及应用状况。
In this paper lamp pumping and diode pumping for solid-state lasers are compared. The different forms of pumping for different sorts of solid-state lasers are analyzed in details.
对固体激光器的灯泵浦和二极管泵浦方式进行了比较，详细分析了不同类型的固体激光器所适用的泵浦方式。
The conception and merit and fabrication method of composite configuration operation material in solid state lasers is introduced.
介绍了固体激光器中复合结构工作物质的概念、优点和制作方法。
This article describes the advantages and applications of the diode pumped solid state lasers (DPSSL), especially its future applications to the powerful laser weapons and the laser fusion.
本文介绍了二极管泵浦固体激光器的优点及其应用，特别是它在强激光武器和激光聚变方面的应用前景。
Thermal effect of the crystals seriously affects LD pumped solid state lasers 'performance.
激光晶体这种热效应严重影响着激光二极管抽运全固态激光器的性能。
Beams combination is the only way for development of high power and high beam quality solid state lasers.
光束合成是研制高功率、高光束质量固体激光器的必由途径。
A coherent combining scheme for two solid state lasers was proposed by using Michelson cavity technique.
提出了采用迈克尔逊干涉复合腔技术进行两路固体激光器相干合成的实验方案。
His main interests are solid state lasers and their applications, DPSS laser new techniques, nonlinear optics techniques and laser properties research on new crystals.
主要从事固体激光技术及其应用、全固化激光新技术、非线性光学技术以及新材料激光特性的研究。
The output parameters such as beam divergence angle in far-field output power of high power solid state lasers are variable due to thermal effect of optical pumping.
由于光泵浦热效应，高功率固体激光器的输出参数如光束远场发散角、输出功率等会发生变化。
The output parameters such as beam divergence angle in far-field output power of high power solid state lasers are variable due to thermal effect of optical pumping.
由于光泵浦热效应，高功率固体激光器的输出参数如光束远场发散角、输出功率等会发生变化。
应用推荐