The plasticity can be enhanced by post recrystallization, keeping the strength of solid-solution state at the same time.
后续再结晶处理可以在保持固溶态合金强度的同时大幅度提高其塑性。
The effects of solid-solution temperature and holding time on the grain growth and hardness of GH4169 superalloy were investigated.
研究了热处理温度和保温时间对GH4169合金晶粒长大规律和硬度的影响。
In the reverse direction, from solid to solution, the phase is abrupt and well marked.
在相反的方向,即从固体到溶液,相变则是突然的、十分明显的。
After the customer signs the solution proposal, the next step is to create a solid project plan that covers as many project details as possible.
在客户签订解决方案建议之后,下一步就是创建实在的项目计划,其中包含尽可能多的项目细节。
The glucopyranose forms of glucose predominate in solution, and are the only forms observed in the solid state.
葡萄糖的吡喃糖形式在溶液中占优势,并且是在固态中观察到的唯一形式。
The influence of different solid solution treatment on the structure and corrosion resistant property of cast duplex stainless steel was investigated.
研究了不同固溶处理对双相铸造不锈钢的组织及其耐蚀性能的影响。
This paper discusses the solid solution, surface treatment and drawing deformation and drawing process of GH90 alloy spring steel wires.
本文探讨了GH90合金弹簧钢丝的固溶处理、表面处理以及拉拔变形量和拉拔工艺。
World leaders are running out of time to come up with a solid solution before that meeting.
要在哥本哈根气候大会之前达成一个切实可行的解决方案,世界上各国领导人的时间已经所剩无几。
Hard anodizing film could be obtained on Al-Cu alloy surface which had been treated with solid solution treatment and natural aging.
经固溶处理和自然时效的铝铜合金可以进行硬质阳极氧化。
A solid solution of ferric carbide or carbon in iron; cools to form pearlite or marten site.
含铁碳化物或含碳铁的固体溶体,冷却可形成珠光体或马氏体。
Alloy: Metallic substance composed of two or more elements, as either a mixture, compound, or solid solution.
合金:由两种或多种元素组成的金属材料,以化合物或固溶体形式存在。
The influence of different ratio of raw materials on crystalline phases and unit cell parameters were studied and the formation mechanism of mullite solid solution was discussed.
探讨不同配方合成的莫来石的晶相组成、晶胞参数及带有结构缺陷的莫来石固溶体的形成机理。
Excellent wear resistance of the coating is mainly due to the alloy carbide with obvious wear resistance. The alloy carbide is distributed on the matrix of solid solution.
涂层具有较高耐磨性的原因主要是固溶体的基体上分布有块状合金碳化物,具有较好的耐磨性。
A entirely set of method to separate and determine solid solution boron, carbon boride, alloy elements boride, boron oxide and boron nitride in low boron steel is established.
通过实验,建立了一整套低硼钢中固溶硼、碳硼化物、合金元素硼化物、氧化硼和氮化硼的分离、测定方法。
The effect of solid solution temperature on the structure properties of LY11 aluminium alloy is studied.
本文研究了固溶温度对硬铝LY11组织与性能的影响。
Heat treatment methods, such as solid solution and quenching, have greatly enhanced its mechanical strength, which also leave a large internal residual stress in it.
固溶、淬火等热处理手段极大地提高了其机械强度,但同时使其内部产生了较大的残余应力。
Using a solid system infrastructure ensures a trusted, high-performance solution.
使用坚固的系统基础结构可以保证得到可信赖的、高性能的解决方案。
The effect of cooling regime after solid solution and aging treatment on hardness, electrical conductivity and impact toughness was investigated for Cu-Ni-Be alloy.
本文研究了固溶时效后不同冷却方法对铜镍铍合金的硬度、电导率和冲击韧性的影响。
Symmetrical and asymmetrical balance can be helpful in achieving a solid and clear design solution and thus provide a foundation for rich user interaction.
对称和不对称的平衡都能帮助你取得一种实在和清楚的设计思路以提供丰富的用户互动的基础。
Solid solution strengthening is summarized and compared to the new concept for this lecture: precipitation strengthening.
将摘要固溶强化并与本堂课的新观念-析出强化进行比较。
At the upper temperatures, only austenite is present, the 0.77% carbon being dissolved in solid solution with the iron.
在较高温度时,只存在奥氏体,0.77%的碳溶解在铁里形成固溶体。
Vanadium nitride and carbide, as a solid solution, is an important additive to steel.
碳氮化钒是氮化钒和碳化钒的固溶体,是重要的钢中添加剂。
Vanadium base solid solution hydrogen alloy is a kind of the high performance materials developed in recent years.
钒基固溶体贮氢合金是近年来开发的一种新型高性能贮氢材料。
Up to now, the technology has been used to prepare supersaturated solid solution, amorphous alloys, intermetallic compound, nanocrystalline, magnetism materials, superconductor materials, and etc.
现在,运用这一技术已成功制备出过饱和固溶体、非晶、金属间化合物、纳米晶材料和超导材料、磁性材料等。
No solid solution was found in this system.
此系统不生成固溶体。
Sn and Sb can form complete solid solution, so no single phase of either Sb or Sn was found in SbSn thin film.
锑锡薄膜的制备过程中发现,薄膜成份为单相的锑锡合金,未出现金属锑或锡的单相,这是由于锑与锡易于形成完全固溶体的原因。
Heating a metal to a high temperature and maintaining it long enough for one or more constituents to enter the solid solution.
将金属加热到高温,并保持较长的时间,使一种或更多的要素进入到固溶体里面。
It has low melting point and good wettability to the base-metal, and contains a high-strength and high-hardness solid solution structure, with a high strength of soldering joint.
该钎料具有熔点低,对母材的润湿性好,钎焊接头组织中含有强度、硬度较高的呈弥散分布的固溶体,以及接头强度较高等特点。
The results show that the mother sheet and the grown layer are bonded by diffusion forming a solid solution.
试验结果表明,母带和凝固层靠相互扩散形成固溶体而实现良好的冶金结合。
The results show that the mother sheet and the grown layer are bonded by diffusion forming a solid solution.
试验结果表明,母带和凝固层靠相互扩散形成固溶体而实现良好的冶金结合。
应用推荐