The particle size of the powder from solid-liquid reaction milling is fine, even though reaches to nanoscale.
采用固液反应球磨技术在高温下可以形成粒度很小，甚至达到纳米级的金属间化合物粉末。
This success in simulating non-instantaneous reaction strongly manifests the capability of the model in describing the behavior of some solid-liquid reactions.
这一形式简单、使用极方便的数学模型在非瞬间反应系统的成功应用，更有力地证明其对某些类固液反应的适用性。
Making the bulbs requires workers to handle mercury in either solid or liquid form because a small amount of the metal is put into each bulb to start the chemical reaction that creates light.
制造这些灯泡需要工人们直接处理固态或液态的水银，因为每个灯泡中要封入小量的该种金属用来发生化学反应以发光。
When the reaction products form as high melting point CA2, CA6 and MA spinel in a continuous solid phase it will clog the liquid channel and resist the further diffusion of fused slag in the brick.
并且当熔渣与耐火材料的反应产物为高熔点的CA2、CA6和MA尖晶石相且连续交错分布时，能堵塞液相扩散通道，抑制熔渣向耐火材料内部的进一步渗透。
Maybe you're not looking at a reaction, but you've got some new compound, and you're looking at it go from liquid to solid or to gas.
也许你研究的不是一个反应，但你得到了一种新的化合物，你看着它从液体变成了固体或气体。
Ammonia and sulfuric acid (SO3) in and the reaction liquid after vacuum evaporation, concentration, crystallization, and then to liquid-solid separation processes obtained dry product.
氨水与硫酸(SO3)进行中和反应，反应液经过真空蒸发、浓缩、结晶，再进行液固分离、干燥等工序制得产品。
There are three ways, which include liquid, solid and rubber, to make silicone foam, analyzing the reaction principles in preparation of silicone foam.
本论文采用液体法、固体法和硅橡胶法三种不同的方法制备有机硅泡沫材料，分析了三种制备方法的反应机理。
Phosphate rock (plasma) and sulfuric acid reaction, the reaction slurry to liquid-solid separation, dilute phosphoric acid to be wet.
磷矿粉(浆)与硫酸反应，反应料浆进行液固分离，得到湿法稀磷酸。
This paper has studied and discussed the reducing of nitrobenzene in the microelectrolysis reaction course, which is a solid-liquid interface course.
本文研究探讨了微电解反应过程中硝基苯降解的情况，这是固液界面过程。
The thermokinetics of solid liquid reaction of zinc sulfate with histidine are studied using a microcalorimeter.
微 热量 计 对硝酸锌与组氨酸在水中的固液反应进行了热动力学研究。
The reduction process consist of solid -solid reaction, liquid -solid reaction, reaction in molten steel and liquid - liquid reaction.
反应过程包括：固-固反应、液-固反应、铁浴反应和液-液反应。
A solid phase and a liquid phase are efficiently mixed in the reactor in order to enhance the heat and mass transfer efficiency during the reaction.
在反应器中固液两相进行高效的混合，强化反应过程的传热和传质效率。
The reduction processes consist of solid-solid reaction, liquid-solid reaction, reaction in molten steel and liquid-liquid reaction.
反应过程包括：固固反应、液固反应、铁浴反应和液液反应。
With the use of liquid reducing agent, the thermal reduction reaction environment change from solid - solid into solid - liquid, lead to significant improvement of heat and quality transfer.
该方法通过采用液态还原剂，实现热还原反应环境由固—固态转变为固—液态，大幅度改善热量传输、质量传输条件。
Low reaction temperature has the advantages of easy separation of solid from liquid for the obtained material, saving heating steam and reducing ammonia volatilization.
低温反应的优点是所得物料便于固液分离，节省加热蒸汽，减少氨挥发。
Some new methods, solid state reaction by mechanical milling and liquid state reaction followed by spray drying, of synthesizing nanostructured feedstock are proposed.
介绍了固相反应法、液相反应原位喷雾干燥法等加工纳米结构喷涂粉材的新方法。
Vortex and Pulsed Reaction Equipment (VPRE) was presented. The flow pattern and characteristics for gas-liquid or gas-liquid-solid system in VPRE were analyzed.
设计了一种涡旋脉冲式反应装置，分析了气-液或气-液-固多相体系在涡旋脉冲式反应装置中的流动状态及特点。
The residual sludge from Licunhe wastewater treatment plant was hydrolyzed by alkali hydrolysis to extract protein at different ratio of solid to liquid at different temperature, reaction time and pH.
为充分提取污水污泥中的细胞蛋白，实现污泥的增值利用，以青岛市李村河污水处理厂剩余污泥为材料，采用碱水解法提取剩余污泥中的蛋白质。
The combined solid-liquid stirring device has good stirring effect, and can be used in the mixing or reaction process of solid-liquid materials with high viscosity and high solid material content.
搅拌效果良好，可用于较高粘度、较高固体物料含量的固液物料的混合或反应过程。
The optimal reaction conditions were as follows; the main factors which affect the decolouring ratio were acid con centration, solid - liquid ratio , temperature and activation time.
研究了活化 酸度、活化温度、活化时间、液固比、浸泡时间等工艺条件对 活性白土脱色力的影响。
The effects of reaction temperature, time, ratio of liquid to solid (L/S), atmosphere and catalysts on liquefaction of microcellulose and bagasse were investigated in detail.
探讨了反应温度、时间、液固比、液化气氛、催化剂等因素对微晶纤维素、蔗渣液化转化率以及各相产物分布的影响。
Metheds by laser ablating a heterogeneous reaction system which was consisted of solid graphite, liquid and gaseous tetrachloromethane, synthesis was carried out by plasma reaction.
方法用激光溅射多相反应体系，以石墨为固体靶，以四氯化碳为气相和液相反应物，通过等离子体反应进行合成。结果从合成产物中分离表征了六氯苯。
For a solid or liquid sample, the sample is firstly processed as following: step A, ammonia water is added into the sample, and ethanol is added after reaction;
对于固体和液体样品，先对样品进行如下处理：A） 样品中加入氨水，反应后加入乙醇；
The non - homogeneous reactor, including the solid - liquid reactor, liquid - liquid reactor, the gas - liquid reactor and gas - liquid - solid three-phase reaction device.
非均相反应器包括固-液反应器，液-液反应器，气-液反应器和气-液-固三相反应器。
Polymer grade p-phthalic acid can be synthesized by p-xylene directly oxidation in gas-liquid-solid reaction system with stirred tank reactor.
氧化工艺采用气液固系搅拌式氧化反应器，可由对二甲苯氧化直接制备聚合级对苯二甲酸；
Polymer grade p-phthalic acid can be synthesized by p-xylene directly oxidation in gas-liquid-solid reaction system with stirred tank reactor.
氧化工艺采用气液固系搅拌式氧化反应器，可由对二甲苯氧化直接制备聚合级对苯二甲酸；
应用推荐