Cyclone separator is a kind of equipment that USES rotary motion of gas-solid two-phase fluid to make the solid particle separated from the gas flow by centrifugal force.
旋风分离器是一种利用气固两相流体的旋转运动使固体颗粒在离心力的作用下从气流中分离出来的设备。
A problem about tubing string vibration caused by the fluid unsteady flow inside tubing string is studied from the Angle of solid liquid coupling vibration in dynamics.
文章从动力学中固液耦合振动的角度出发，研究了油管柱内流体不稳定流动引起的油管柱振动问题。
According to the basic conception of fluid-solid coupling seepage flow theory, an equation of motion should be founded.
根据流固耦合渗流理论的基本思想，建立流固耦合渗流运动方程。
The calculation results of the model show that the addition of solid particles makes the fluid turbulent flow enhance, the heat transfer enhance and the wall temperature decrease.
由模型计算结果可知，固体颗粒的加入使流体的湍流程度增强，强化了传热，降低了壁温。
The centrifugal sewage pump is the typical multi-phase flow fluid machinery, which is mainly used to transport and lift solid-liquid two-phase flow including a certain extent of gas.
离心式污水泵(即污水提升泵)，是典型的以输送固液两相流为主，同时含有不定量气体的多相流流体机械。
The characteristics of air flow and the air-solid two phase movement in a turbo classifier are analyzed by the dynamic equation of fluid motion combined with the features of intense circulating flow.
利用流体运动方程和平面强旋转流的流动特性分析了涡流分级机内空气流动特性和气固两相流运动特性。
Flow behavior of liquid and solid phases was simulated in an inversed fluidized bed based on two-fluid two-phase flow model.
基于欧拉·欧拉双流体模型，数值模拟倒置液固流化床内液固两相流动行为。
The main purpose of the virtual grid is to convert a solid wall boundary condition into an interface condition while no fluid flow computations are conducted within the virtual grid.
虚拟网格为紧贴物面的面网格，它的作用是将物面边界条件传递给其它网格的边界面，而其本身不作流场计算。
However, for the analysis such as solid phase stress, fluid pressure and flow velocity, the difference between two parameter configurations must be considered.
但在分析软骨的固相应力、液体压力和流动等较深入细致的问题时，两种参数设置结果之间的差异不能忽略。
We can obtain the impeller's interior actual flow situation and the impeller internal stress distribution due to axial flow fluid-solid coupling numerical simulation.
通过对轴流泵叶轮流固耦合的数值模拟，得到了叶轮内部真实流动情况和叶内部应力分布情况。
According to the hydromechanics and the elasticity theory established axial flow pump's fluid - solid coupling finite element equation.
根据流体力学和弹性力学建立了轴流泵的流-固耦合有限元方程。
The models with carrier fluid are one of ways to describe the phenomenon of liquid-solid mixture flow in a pipeline. A carrier fluid is composed of water (or other liquid) and fine particles.
载体流模型是描述管道中液-固混合流现象的方法之一，载体流由水(或其他液体)和细颗粒组成，粗颗粒在含有悬浮细颗粒的载体中输送。
This paper USES the fluid-solid coupling method compute the axial flow pump's impeller.
本文采用流-固耦合的方法对轴流泵的叶轮进行计算分析。
An experimental study is conducted of the dynamic characteristics of gas flow pulsation in a turbine machinery seal clearance from the viewpoint of fluid solid interaction.
从流固耦合的角度，试验研究了透平机械密封间隙气流脉动的动态特性。
A numerical method is put forward, which can be used for analyzing the fluid-solid coupling function of gas flow-induced vibrations in a three-dimensional rotor seal system.
提出了分析三维转子密封系统气流激振流固耦合作用的数值计算方法。
At the same time, analysis the fluid-solid coupling under different working conditions, it has provided certain help and the reference for the later axial flow pump impeller's design.
同时，详细分析了不同工况下的流固耦合情况，为以后轴流泵叶轮设计提供一定的帮助和参考。
On the base of discrete equations, the fluid-solid coupling finite element programs for single phase flow and two phase flow in unconsolidated sandstone reservoir were developed with FEPG.
在有限元离散的基础上，基于FEPG系统自主开发了疏松砂岩油藏单相及两相渗流流固耦合有限元程序。
In the research of water hydraulic technology, flow field simulation is done by the method of Fluid-Solid coupling, leading to the pressure nephogram and velocity vector of the pump model.
在水压技术理论研究方面，应用流固耦合理论对水压齿轮泵进行了二维流场的仿真分析，得出了其流场压力云图和速度矢量图。
The computational fluid dynamics software FLUENT is used to simulate the 3-d two-phase (gas-solid) flow of cyclone separator.
应用计算流体力学软件FLUENT对旋风分离器进行三维气固两相流场的数值模拟。
Numerical 3d simulation and research on inner nozzle and outlet flow field of solid rocket motor of long range missile designed by Russia using STAR-CD computational fluid software.
采用STAR - CD计算流体软件对某俄式发动机的喷管内流场及喷管出口处流场进行了三维的数值仿真与研究。
Numerical 3d simulation and research on inner nozzle and outlet flow field of solid rocket motor of long range missile designed by Russia using STAR-CD computational fluid software.
采用STAR - CD计算流体软件对某俄式发动机的喷管内流场及喷管出口处流场进行了三维的数值仿真与研究。
应用推荐