This composite coating can be formed by a sol gel process from a coating liquid containing a hydrophilic organic polymer.
该复合膜，从含有亲水性有机聚合物的涂液，利用溶胶凝胶法形成。
The solid state dye lasers have many advantages. There are many ways to prepare them, and the sol gel process is a better one.
固体染料激光性能优良，其制备方法有多种，溶胶凝胶掺入法是其中较好的一种。
Preserving gel texture during the drying step, which is one of the main problems of Sol gel process, can make drying gels have a lot of special properties and applications.
在干燥阶段维持凝胶织构可使得干燥凝胶具有一些特殊的性质和用途，也是溶胶-凝胶工艺中的关键问题之一。
This paper systemically introduced the features, principle, technological process and the application of coating materials, prepared by sol gel process, looked ahead the coming developing prospect.
较系统地介绍了溶胶凝胶法制备涂层材料技术的特点及一般原理。概述了溶胶凝胶法制备涂层的工艺过程以及涂层材料的应用。展望了未来的发展前景。
A new kind of sol - gel process for preparation of dense UO2 kernels used for HTGR (High Temperature Gas cooled Reactor) has been developed in our institute.
为了制备高温气冷反应堆用燃料芯核，致密uo_2微球，研究了一种新的溶胶-凝胶工艺。
Detailed requirements of silicone sol and separators for gelled batteries as well as the gel-filling process were described and discussed.
论述了胶体电池用硅溶胶的具体要求，探讨了与胶体电池相适应的隔板，并对胶液的灌注过程进行了描述。
Hydrophobic silica gel was prepared by sol-gel process using tetraethoxy silicone(TEOS) as raw material, then the surface was chemically modified by diethoxydimethylsilane(DDS).
以正硅酸乙酯为原料，经溶胶-凝胶过程制备二氧化硅溶胶，再利用二甲基二乙氧基硅烷（DDS）对其进行改性，制备了疏水性二氧化硅凝胶。
Structure evolution of both TEOS and colloidal silica in the sol-gel process was studied.
研究了正硅酸乙酯(TEOS)和硅溶胶水解聚合过程中溶胶聚合物分子的生长过程。
The NASICON sensitive materials for ionics sensors were prepared by sol-gel process and the process was compared with the conventional ceramic process.
本文介绍应用溶凝胶工艺制备离子传感器的敏感材料NASICON，并与传统的陶瓷工艺作了比较。
The structure of hair was replicated via a sol-gel process using human hair as the template.
以人发为生物模板，用溶胶-凝胶法对人发的表皮结构进行了复制。
We discussed in detail on the usage of sol-gel process in rubber reinforcing, optical materials, functional coatings and other field.
并对溶胶凝胶法在橡胶增强、光学仪器、功能化涂层以及其它领域中的应用进行了具体的讨论。
Combined with characteristics of functional films, a photosensitive sol-gel technique, in this paper, was examined, during which the fine-patterning process of the films was taken into consideration.
本研究结合功能薄膜的特点，研究了感光溶胶-凝胶技术，在薄膜的制备过程中就考虑到薄膜的微细加工。
The chemical process of sol-gel technology can be divided into organic and inorganic technology according to the different raw material.
溶胶—凝胶技术的化学过程根据原料不同可以分为有机工艺和无机工艺。
Objective: Aim of this study was to evaluate the effect of silica coating with sol-gel process on bonding strength between glass infiltrated alumina ceramic and resin luting cement.
目的：探讨利用溶胶凝胶法进行纳米硅涂层表面改性对玻璃渗透氧化铝陶瓷粘结强度的影响。
The sol-gel process is a method to prepare metal oxide by using alkoxy metal salt or metal inorganic salt.
溶胶-凝胶过程是是一种用金属烷氧化物或金属无机盐在较低温度的条件下制备金属氧化物的方法。
At present, preparation of hybrid material via a sol-gel process has been a hot field in material research.
采用溶胶-凝胶法制备有机-无机杂化材料是近年来热门的研究领域。
Li-doped lanthanum chromite powders in stoichiometric proportions were prepared by sol-gel process.
采用溶胶-凝胶法，按化学配比将锂元素掺入铬酸镧中制得粉末。
Fine mullite powder was synthesized by sol-gel process with tetraethoxysilane (TEOS) and aluminium nitrate as raw material.
以正硅酸乙酯和硝酸铝为原料，采用溶胶-凝胶法制备出了超细的纳米莫来石。
The method of the invention comprises a sol-gel process and a vacuum freezing drying process.
本发明采用的方法为溶胶-凝胶和真空冷冻干燥法。
Organic-inorganic hybrids synthesized by sol-gel process usually exhibited low elastic modulus, high ductility and high mechanical strength.
溶胶-凝胶法制得的有机-无机杂化材料通常显示低弹性模量、高延展性及高机械强度。
The phase transformation of xerogels during heat treatment and the process of nonhydrolytic sol-gel reaction are studied by TG-DTA, XRD and FT-IR.
应用TG-DTA、XRD和FT-IR等测试手段研究了凝胶热处理过程中的相变化以及非水解溶胶-凝胶的反应过程。
Firstly, ITO conductive anode films were fabricated on glass tube substrates by sol-gel process.
首先，本文重点研究了ITO薄膜的溶胶—凝胶制备工艺。
Surface structured silica hollow microspheres were synthesized using the rape pollen grain as a biotemplate via a facile sol-gel method and a succedent calcinations process.
利用油菜花粉作为生物模板，通过溶胶在花粉颗粒表面包裹，再经高温烧结去除花粉颗粒的方法制备了具有特殊表面形貌的二氧化硅中空微球。
NASICON was synthesized by using normal reagents as raw material and sol-gel process. Based on the resulted material, the solid electrolyte CO2 sensor was prepared.
以常规试剂为原料，采用溶胶-凝胶法合成了NASICON固体电解质材料，并以该合成材料为基础，制备了小型固体电解质型CO2传感器。
Sol-gel process is combined with polycationics in three different ways and the respective synergetic effect on the color fixing performance of23kinds of direct dyes is reviewed.
考察溶胶凝胶法、阳离子固色法及这3种方法的不同组合对23种直接染料固色效果的影响。
The LiTaO3 thin film was chosen as infrared sensing film and prepared by a sol-gel process using lithium acetate and tantalum ethoxide as starting materials.
用醋酸锂和乙醇钽作为起始反应物，通过溶胶凝胶工艺生成了对红外敏感的钽酸锂薄膜，并详细讨论了基于钽酸锂薄膜的红外探测器件制备工艺。
Decoration film on glass surface doped with phthalocyanine blue was prepared by sol-gel process using tetraethoxysilane, isopropanol and water as the raw materials.
采用溶胶—凝胶法，以正硅酸乙酯、异丙醇、水为原料制备了掺杂有机颜料酞菁蓝的玻璃表面装饰膜。
Carbon aerogels were prepared from resorcinol and formaldehyde via sol-gel process, high temperature carbonization and atmospheric pressure drying technology with solvent replacement.
以间苯二酚和甲醛为原料，采用溶胶-凝胶工艺，结合高温碳化和溶剂替换常压干燥技术，制备了碳气凝胶。
The mesoporous nanoparticle TiO_2 is prepared by sol-gel process, and its effect on the degradation rate of phenol under different photocatalytic degradation conditions is investigated.
以溶胶-凝胶法合成中孔纳米二氧化钛，考察不同光降解反应条件下其对苯酚溶液的降解效果。
The mesoporous nanoparticle TiO_2 is prepared by sol-gel process, and its effect on the degradation rate of phenol under different photocatalytic degradation conditions is investigated.
以溶胶-凝胶法合成中孔纳米二氧化钛，考察不同光降解反应条件下其对苯酚溶液的降解效果。
应用推荐