The software design of control system includes the driver program design and application program design.
控制系统的软件设计包括底层驱动程序设计和上层应用程序设计两方面。
It introduces the hardware and software design of control system in X-ray thickness gauge used in cold-rolled steel strip.
介绍了一种X射线冷轧测厚仪控制系统的硬件设计和软件设计。
In this paper we proposed a hardware and software design of Control System of the Log Shape Inspecting Equipment Based on ARM9.
本文提出一种基于ARM9的原木形状识别机控制系统的软硬件设计。
Absrtact: Introduces a kind of manufacture of hide obstacle vehicle and provides the hardware circuit and software design of control system.
摘要：介绍了智能语音、避障小车的一种制作方法，给出了控制系统的硬件和软件设计。
The industrial manipulator of 3-dof has been designed based on DC torque motor, discourses mechanical structure and hardware-software design of control system.
设计了一种基于直流力矩电动机的三自由度工业机械手，论述了该机械手的机械结构及其控制系统的硬件、软件设计。
This paper explains the principle of Ration Pouringcontrol based on dynamic lost heavy method to Lead AnodePlate, the hardware constitution and the software design of control system is introduced.
采用动态失重法对铅阳极板浇铸进行定量控制，阐述了定量浇铸控制原理，介绍了系统的硬件组成及软件设计方法。
The power supply circuit, driving circuit, display circuit, software design and signal collection of the control system are outlined.
概述了控制系统的电源电路、驱动电路、显示电路与软件设计及信号采集的方法。
The paper introduces the principle and design of an automatic control system for classroom lighting, and hardware composing and software design of this system in detail.
本文介绍了这种新型教室节能控制系统的工作原理及设计方案，并且阐述了本系统的硬件组成和软件设计。
This paper presents application of PLC in a plate shearing machine control, and expounds the design the hardware and software of the system in detail.
介绍了可编程控制器(PL C)在自动剪板机控制中的应用，对系统的硬件和软件设计作了较为详细的阐述。
Bases on analyzing the control schemes of system, the design methods of software and hardware, as well as the function and benefit accomplished by the system are described.
在分析系统控制方案的基础上，阐述了系统的硬件和软件设计方法，以及系统实现的功能和效益。
The software and hardware design for synchronization generation, the formation of video, graphic display and control system are discussed.
对其同步信号产生、视频信号形成以及图形处理和控制的软硬件设计进行了讨论。
And the specific hardware system structure, control slug and the design of drive software and the transmission performance of PCI bus for nuclear spectrometry were also set forth.
并对PCI总线在氡室检测系统中的具体硬件系统结构、控制芯片与驱动软件设计，与PCI总线对核谱转换的传输性能作了阐述。
In the construction of industrial control configurable software for greenhouse agriculture production detection and control process, design of real-time database system is introduced.
介绍了在面向温室农业生产监控过程的工控组态软件建设中，实时数据库系统的设计。
This paper introduces the control system of elevator based on CAN bus, analyses its hardware and software and provides hardware design and flow chat.
本文介绍基于CAN总线的电梯控制系统，并对总体方案、软硬件设计作了分析，给出了具体设计电路以及软件流程图。
This paper also gives the system components and the control method of the hardware and software design.
文中同时给出了系统组成，以及控制的软硬件设计方案。
The application of PLC in the control system of platform booms, the hardware and software design method of PLC control system are presented and discussed.
介绍了PLC在舞台吊杆控制系统中的应用，以及PLC控制系统的硬件和软件的设计方法。
This paper first briefly introduces VOD's principle and application, then presents a design of VOD server software, and particularly analyzes the system control, signaling and play control.
本文首先简单介绍了VOD视频点播的原理，然后给出了一种具体的服务器的设计方案，其中详细分析了系统控制、信令功能及播放控制部分。
I have completed hardware design of micro-control system, software writing and debugging.
己完成了单片机通信控制系统硬件设计和软件编写与调试任务；
This paper introduces the operational principle, composition and features, the software design and etc. of the automatic temperature control system of disinfect machine.
介绍了消毒机温度自控装置的工作原理、组成及其特点和软件设计等。
In this paper, we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.
介绍了以AT 89s52单片机为核心的金相切割机控制系统原理和软硬件设计方法。
On the basis, it completes hardware configuration and software design of chemical water treatment control system.
在此基础上完成了电厂化学水处理控制系统硬件配置和软件设计。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
This paper introduced the design method and research process of the control system, including hardware design, software design and so on.
本文论述了控制系统的设计方法和设计过程，包括硬件设计、软件设计等方面。
The working process of cut tobacco feeding, the air circuit and software (design) of the control system, the input and output connections of PLC were introduced.
介绍了烟丝喂入的工作过程，对于该系统的气路系统、PLC输入和输出接线以及软件设计进行了论述。
This thesis has introduced the structure, disposition, structure and technology characteristic and system software design plan of self-developed LN2000 Distributed Control system.
本文介绍了自主开发的分散控制系统LN2000的结构、配置、结构和技术特点以及系统软件设计方案。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
The design of control node of home network control system is described. The design includes hardware, software, and the development of wireless communication protocol.
介绍了家庭网络控制系统的控制子节点设计，控制子节点的软硬件的设计与开发，无线通信协议的设计与开发。
The configuration of the computer system, system hardware and software design are presented. Also, the control results of the system are introduced in detail.
介绍了计算机系统配置、系统硬件配置及软件设计，还详细介绍了系统控制效果。
Overall design scheme, the composition of control system, hardware construction and software control flow are given in detail., design philosophy of hardware and software is established.
详细介绍了总体设计方案、控制系统的组成、硬件结构及软件控制流程，确立了硬件、软件的设计原则。
Overall design scheme, the composition of control system, hardware construction and software control flow are given in detail., design philosophy of hardware and software is established.
详细介绍了总体设计方案、控制系统的组成、硬件结构及软件控制流程，确立了硬件、软件的设计原则。
应用推荐