• Utilized general FEM software ANSYS to establish mechanical model and solve.

    并利用通用有限元软件ANSYS建立其力学模型求解

    youdao

  • Vibrating characteristic is analyzed on an engine vane with the software ANSYS.

    ANSYS软件对某发动机叶片振动特性进行了分析。

    youdao

  • Furthermore, the fixture structure is optimized by using the finite element analysis software ANSYS.

    利用有限元分析软件Ansys进行辅助设计,结构进行优化。

    youdao

  • The Optimization back analysis of foundation pit soil body's parameter is studied in software ANSYS.

    本文采用有限元分析软件ANSYS优化技术基坑土体参数进行了优化分析。

    youdao

  • The thermal module of the finite element software ANSYS is used to analyze the heat transfer of the gearbox.

    研究使用ANSYS有限元软件分析模块进行变速箱热传导分析计算。

    youdao

  • A useful software ANSYS for finite element analysis can analyze magnetic field efficiently and conveniently.

    有限元分析软件ANSYS作为一种很有用的工具软件,磁场进行方便、高效的分析。

    youdao

  • The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS.

    文章利用ANSYS有限元分析软件螺旋布孔射孔套管承载能力进行了分析。

    youdao

  • The eddy current fields in three-layer copper and aluminum composite plates were analyzed using the software ANSYS.

    利用有限元分析软件ANSYS对新型铜-铝-三层复合板内部涡流进行模拟计算。

    youdao

  • The whole procedure of a foundation pits excavation and its soil-nailing support is simulated with the FEM software ANSYS.

    通过有限元数值分析软件ANSYS对深基坑开挖钉支护全过程进行了模拟。

    youdao

  • Based on FEM software ANSYS, the dendrites stress states are computed using the results of the melt flow as computing parameters.

    使用有限元软件ANSYS把熔体流动计算结果作为参数计算枝晶受力状态

    youdao

  • After the formulation of appropriate criteria takes place the optimization of the system with the Finite Element Software ANSYS.

    列出相应准则公式后,采用有限元程序ANSYS系统进行优化

    youdao

  • FEM analysis of a kind BRB applicable to space structures was conducted by using software ANSYS. The hysteresis curve of the BRB was obtained.

    利用ANSYS程序适用于网壳结构屈曲约束支撑进行有限元分析,得到支撑滞回曲线

    youdao

  • The FEM software ANSYS was employed to analyse and simulate the flow velocity in L shape sheet extruder die based on a three dimensional model.

    利用大型有限元计算软件ANSYS进行以模型为基础L机头内部流动速度分析模拟研究

    youdao

  • The stress and temperature distribution were computed by the finite element software ANSYS for the two instances of steady operation and starting-up.

    通过有限元软件A NSYS分别计算了启动稳态操作情况下, 加氢反应器筒体的温度分布应力分布。

    youdao

  • The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.

    应用有限单元对温度场微分方程进行求解,计算过程借助有限元分析软件ANSYS完成

    youdao

  • A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.

    介绍了利用有限元分析软件ANSYS压电智能结构主动振动控制系统进行优化设计方法

    youdao

  • Based on secondary development technology, the large universal finite element software ANSYS could remedy its inadequate specialization with APDL language.

    大型通用有限元软件ANSYS可以利用APDL语言,通过二次开发技术弥补本身专业化不足的缺陷。

    youdao

  • The finite element analysis (FET) software ANSYS have been used to simulate the temperature and stress distribution in stacked die package under power load.

    应用有限元分析软件ANSYS模拟功率载荷叠层芯片封装各层的温度应力分布

    youdao

  • Bolt parameters of the track tunnel were simulated by using the finite software ANSYS in order to provide a theoretical basis for designing support parameters.

    为了给现场锚杆支护参数设计提供理论依据采用有限元软件ANSYS轨道巷锚杆的支护参数进行研究。

    youdao

  • In the part of theory calculation, utilize general FEM software ANSYS, calculate the tubular joints, then summarize the hot-spot location and the SCF of joints.

    理论计算部分运用大型通用有限元软件ANSYS,对节点进行应力分析计算了热点应力应力集中系数。

    youdao

  • The test model and another model with the same span, span-height ratio, and sectional dimensions were analyzed using the finite element analysis software ANSYS.

    同时利用有限元计算软件AN SY S试验模型以及试验模型相同跨度、跨高比截面尺寸的门式刚架进行计算。

    youdao

  • Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.

    建立负重三维有限元力学模型,在考虑三重非线性情况下ANSYS有限元分析软件计算了负重轮的应力应变分布

    youdao

  • A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.

    应用可视化数值模拟方法,借助于大型通用有限元软件ANSYS建立砂轮回转数学模型,对离心应力进行了仿真研究

    youdao

  • Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.

    传热学基础建立了激光焦点在透明材料内部作用时的温度模型,借助于大型有限元分析软件ANSYS进行了数值模拟。

    youdao

  • Firstly, this paper introduces the realize process of optimal sensor placement in a plane frame structure with model analysis result using finite element software ANSYS.

    首先利用平面框架结构模型实验,借助有限元软件ANSYS利用模态分析结果实现了基于有限元理论的传感器优化布置

    youdao

  • The paper uses finite element analysis software ANSYS, simulating and analysing the experimental process of Carbon Fiber Reinforce Plastic strengthen brick masonry wall.

    采用有限元分析软件ANSYS,对碳纤维加固砌体试验过程进行了模拟分析。

    youdao

  • With finite element analytic software ANSYS, the intensity analysis of the integral structure for typical tubular busbar, support insulator and the pole system was made.

    利用有限元分析软件ANSYS个典型母线支柱瓷瓶电杆系统整体结构强度分析

    youdao

  • With finite element analytic software ANSYS, the intensity analysis of the integral structure for typical tubular busbar, support insulator and the pole system was made.

    利用有限元分析软件ANSYS个典型母线支柱瓷瓶电杆系统整体结构强度分析

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定