Check important components' strength with theory and software analysis method which meets the design requirements of the conclusions.
使用理论与软件分析相结合的方法对重要零部件进行了强度校核，得到满足设计要求的结论。
As a kind of software analysis method, slicing can fix the range of problem in fewer elements by analyzing the internal correlativity of system, which may improve the efficiency of the follow-up job.
切片技术作为一种软件分析方法，依据系统内部的相关性将问题定位在较少的元素中，有助于提高后续分析工作的效率。
Analysis and Design of data processing method and software subdivision.
数据处理方法与软件细分的分析与设计。
It is proved that this method is effective and is widely used in the development of data analysis and plot application software.
实验证明这种方法是行之有效的，并且广泛应用在数据分析与绘图应用软件的开发中。
In order to applying distributed object technology in projects, it is necessary to analysis and design system with the software engineer method.
为了在工程中方便的使用分布式对象技术，应采用软件工程的方法对系统进行分析和设计。
The method and principle of ENOB testing of data acquisition system in the software are analyzed, with relative testing data and analysis given.
分析了测试软件对采集系统有效位数的测试方法及其原理，并给出了实测数据与分析。
The engineering instance is calculated by ANSYS, the popular software for the finite elements analysis, and the results is same as that calculated by common method.
采用目前比较流行的大型有限元分析软件ANSYS对算例进行了分析计算，结果与常规计算方法的结果相符；
Method Using EPI software for data importing and statistic analysis.
方法用EPI软件进行资料的输入和数据处理。
Furthermore, a new method that combines CAD modeling software and finite analysis software to solve the engineering questions is set forth in the article.
同时，提出了CAD造型软件与有限元分析软件相结合解决工程实际问题的方法。
Finally, the effectiveness of the method for software structure analysis and design is verified by an application.
最后，通过应用实例验证了该方法对软件结构分析和设计的有效性。
A reuse-oriented method for software analysis and design is presented.
提出了一种面向重用的软件分析与设计方法。
The software of calculation is developed by the method of sensitivity tolerance analysis. The effect of tolerance of composing loop on tolerance of close loop is analyzed quantitatively.
采用灵敏度公差分析方法开发出相应的计算软件，定量分析了组成环公差对封闭环公差的影响程度。
Orthogonal defect classification method is the foundation of qualitative analysis of software process and implementation of defect management system.
本文选取正交缺陷分类方法作为软件过程定性分析和实现缺陷管理系统的基础。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
In order to realize a noise octave analysis by software, a digit weight method based on FFT is proposed.
为了利用软件实现噪声倍频程分析，提出了一种基于FFT的数字计权方法。
Based on abstract analysis of the composing of embedded system and testing of embedded software, a method of embedded software simulation testing based on fault injection is presented.
在嵌入式系统组成特性和嵌入式软件测试抽象分析基础上，提出了一种基于故障注入的嵌入式软件仿真测试方法。
This paper discussed a method exerting procedure quality management in software requirements analysis.
探讨了将过程质量管理用于软件需求分析的方法。
Based on the multi loop method, the internal fault analysis software has been developed.
以多回路法为理论基础开发的发电机故障分析软件也已面世。
The numerical simulation of the new type of DNG is studied by using FDTD method and CST software, and the physical mechanism analysis for this structure is discussed in detail.
用时域有限差分法和CST软件对该新型结构进行了模拟对比，并对其物理机理进行了分析，解释了其双负效应发生的原因。
Applying the theory and method of mathematical statistics, the statistical analysis software for internal overvoltage is studied and developed.
应用数理统计的原理和方法，研究开发了内部过电压统计分析软件。
Thirdly, develop voltage stability analysis software, base on this method.
再其次，基于这种方法开发了电压静态稳定分析软件。
Software failure modes and effects analysis (SFMEA for short) is a important method to improve software reliability.
软件失效模式和影响分析(SFMEA)是提高软件可靠性的一种重要方法。
The analysis method of management software for self own vehicle of railway in Lanzhou Refinery was introduced during the process of demand analysis, database design and software design.
介绍兰州炼油厂铁路自备车计算机管理软件在需求分析、数据库设计和软件设计阶段所使用的分析方法。
Combining with failure mode and effect analysis (FMEA), a method of safety risk analysis for software architecture on the basis of probabilistic influence diagram is proposed in the thesis.
本文结合失效模式和效果分析FMEA方法，提出一种基于概率影响图的软件体系结构安全性风险分析方法。
The working principle, algorithm analysis and software design method of a simplified V. 23 2fsk modem based on DSP which is a kind of programmable chip are introduced in this article.
介绍了简易v .23二进制频移键控(2fsk)调制解调器的工作原理、算法分析以及基于可编程器件DSP的软件设计方法。
With the increasing complexity of computer software architecture, traditional software analysis and design method has been unable to meet practical needs.
随着计算机软件体系结构的复杂性不断增加，传统的软件分析设计方法已经无法满足实际工程需要。
Through analyzing all data of a flight control real-time software with high data coupling and concurrent processing, a new data coupling analysis method for real-time software is proposed.
以软件中数据为核心，通过分析一个具有高度数据耦合、实时并发进程特点的武器装备飞行控制软件实例，提出一种实时软件数据耦合影响分析方法。
A universal method of intelligent identification was introduced. Basing on the method, the intelligent analysis software of planar combined mechanism was developed.
介绍了一种具有普遍意义的机构智能化识别方法，以及以该方法为基础开发的平面组合机构智能分析软件。
The method of transient pressure analysis and interpretation software for horizontal well are provided and a field example is treated.
利用常规试井分析方法和自动拟合分析方法编制了水平井试井分析软件，并进行了实例分析。
In view of the widely using of graphical object oriented analysis and design method, only can researches on model based software testing solve these conditions thoroughly.
考虑到面向对象图形化的分析设计方式，基于模型的软件测试的研究才能从根本上解决测试领域面临的问题。
应用推荐