Most of the software market are software-based analysis, investors need to own a relatively high level of analysis, through their own analysis to conclude that, and then traded.
市场中大部分软件都属于分析型软件，需要投资者本身具备比较高超的分析水平，通过自己的分析进而得出结论，然后再进行买卖。
Develop optimized software based on the payload analysis.
根据负荷分析开发优化软件。
Perform a methodology-based full software life cycle development for these applications, including requirements analysis, design, and development and testing.
对这些应用程序执行基于方法的完整软件生命周期开发，包括需求分析、设计以及开发和测试。
Based on those experimental data, we adopted TECPLOT software to visualize all those temperature profiles and velocity profiles and made further analysis.
基于实验数据，用TECPLOT软件进行了速度场和温度场的可视化处理，并加以分析。
This subject developed a data acquisition and analysis system software, which is based on component technology.
课题开发了一种基于组件技术的数据录取与分析系统软件。
But there usually exists a gap which it is difficult to overstep from use case analysis model to other design models in four UML-based models of software system.
然而，通常基于UML的软件系统的四种模型中，从用例分析模型到其它设计模型之间存在一条很难逾越的鸿沟。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
本文基于ANSYS软件建立了车架结构的实体单元模型，对汽车车架结构进行静力和动力分析的研究。
This paper introduces the design and analysis of software radio mind based IF digital radar receiver.
本文介绍了基于软件无线电思想的雷达中频数字化接收机的设计与性能分析。
In view of the widely using of graphical object oriented analysis and design method, only can researches on model based software testing solve these conditions thoroughly.
考虑到面向对象图形化的分析设计方式，基于模型的软件测试的研究才能从根本上解决测试领域面临的问题。
Based on abstract analysis of the composing of embedded system and testing of embedded software, a method of embedded software simulation testing based on fault injection is presented.
在嵌入式系统组成特性和嵌入式软件测试抽象分析基础上，提出了一种基于故障注入的嵌入式软件仿真测试方法。
This paper proposes a new method of the CAD software , based on the analysis of two prominent CAD softwares?strong and weak points, and illustrates the new method by one example.
分析了当今二种主要计算机辅助设计应用软件的优缺点的基础上，提出一种新的计算机辅助设计应用软件的应用方法，并结合具体实例给予说明。
Based on the multi loop method, the internal fault analysis software has been developed.
以多回路法为理论基础开发的发电机故障分析软件也已面世。
Based on the analysis of principle of Universal Serial Bus, this paper discusses the developing technology of hardware and software about USB testing system.
在分析usb通用串行总线工作原理的基础上，讨论了USB测试系统中有关的硬件和软件开发技术。
Based on the GIS software, developing space fractal analysis module has broad apply foreground and practical value.
在GIS软件的基础上，利用组件技术开发空间分析模块有着广泛的应用前景和实用价值。
Based on the analysis of the effect of the technology of OOS on software testing, the method of Object oriented software class testing is studied.
本文在分析了面向对象软件技术对软件测试技术的影响基础上，研究了面向对象软件的类测试技术。
Numerical simulation analysis is made of the paste piping transportation using FLOTRAN CFD calculation hydrodynamic analysis module in ANSYS software based on the paste filling mechanical parameters.
以膏体充填力学参数为基础，运用ANSYS软件中的FLOTRANCFD计算流体动力学分析模块对膏体管道输送进行了数值模拟分析。
Moreover, based on the method of finite element analysis and the general software, the failure behavior of high density syntactic foams is investigated.
还利用计算机和通用软件对高密度复合泡沫塑料进行了有限元分析，研究了高密度复合泡沫塑料的失效行为。
In the paper, the idea of dynamic software reuse is presented based on the analysis of the shortcomings of current software reuse and the status of current software development.
本文分析了当前软件重用的特点，针对其不足以及目前软件开发的状况提出了动态软件重用的思想。
Based on analysis of the design tactics and methods of software architect, this system's overall design and database design are described in detail.
在对信息系统架构设计策略和方法分析的基础上，详细描述了系统的总体设计方案和数据库设计。
In the system software design, introduced the nuclear spectrum acquisition software based on the DSP processor and the nuclear spectrum analysis software based on computer.
系统软件设计上，分别介绍了基于DSP处理器的核谱采集软件和基于计算机的核谱分析软件的编制。
Based on the analysis and design of CAN node software and hardware, this dissertation provided a comprehensive introduction of the systemic proposal.
通过对CAN节点软硬件的分析设计，全面介绍了系统的设计方案。
In this paper, based on image analysis of antibacterial circle automatic measurement system software and hardware components were introduced.
本文介绍了基于图像分析的抑菌圈自动测量分析系统的软硬件组成。
This paper simulates the temperature field associated with laser surface quenching using ANSYS - a finite element analysis software, and a series of studies are carried out based on this simulation.
本文结合先进的大型有限元分析软件ANSYS，对激光表面淬火的温度场进行有限元模拟，并在此基础上，对此展开一系列研究。
A software project risk analysis process based on Bayesian networks is presented in this paper.
论文提出了一种基于贝叶斯网络的软件项目风险分析过程。
In order to realize a noise octave analysis by software, a digit weight method based on FFT is proposed.
为了利用软件实现噪声倍频程分析，提出了一种基于FFT的数字计权方法。
Then simulating calculation of profiles and soundings of the DC electro-exploring method are numerically carried out, supported by ANSYS that is a software based on the finite element analysis method.
先从理论上作了分析，然后利用ANSYS软件进行了直流电阻率剖面和电阻率测深法的模拟计算。
An automotive CAE software based on automotive theory, finite element analysis and optimization design has been developed to resolve relevant engineering problems.
基于汽车理论、有限元分析和优化设计方法，为解决工程实际问题，开发了汽车CAE软件系统。
This paper introduces the software composition and application of images processing technology in computer aided pathology analysis system, based on blood cells' automatically pathology analysis.
基于红细胞的自动病理分析，介绍图像处理技术在计算机辅助病理分析系统中的应用以及系统的软件组成。
This paper introduces the software composition and application of images processing technology in computer aided pathology analysis system, based on blood cells' automatically pathology analysis.
基于红细胞的自动病理分析，介绍图像处理技术在计算机辅助病理分析系统中的应用以及系统的软件组成。
应用推荐