The shaft of the ceremonial mace is the whorled tusk of a narwhal, a small Arctic whale. The door handles are of walrus tusk.
仪式权杖柄是用一种小型的北极独角鲸的牙齿制成的。门柄是用海象的牙齿制成的。
It was an old mine shaft. In a small clearing beyond I found the remains of a bucket and a rusting can.
这是一处旧时的矿井,在不远处的空地上我看到当时遗留下来的水桶和生锈的铁罐。
In contrast, in the outstretched shaft type clutch or brake, magnetic coil and transmission between units have small desert land idle, so demand greater magnetized force.
相反,在伸出轴式离合器或制动器,磁性线圈与传动单元之间有小旷地空闲,所以需求较大的磁化力。
Generally speaking, hollow shaft type of small volume, but the amount of magnetic force (magnetic power) also stretch out shaft type than for small.
一般而言,空心轴式的体积较小,而所需磁化力(磁动力)亦比伸出轴式为小。
The bearings are generally installed with a small axial clearance in order to compensate for length variations of shaft and housing.
轴承一般设一个小轴向间隙,以弥补轴和轴承座的长度变化。
Small-scale fertilizer granulator is mainly composed by motor, making grains disc, gearbox, underbed, main shaft bearing, regulate device and rotational speed test system, etc.
小型肥料制粒机主要由电动机、制粒圆盘、变速箱、底架、主轴轴承、调节装置和转速测试系统等组成。
Guide bearing clearance is too small, the vibration of the rotating shaft will be transferred to the bearing and foundation, the bearing clearance is too large, the rotating shaft vibration.
导轴承空隙过小,会把转动轴的振动传给支座和基础,导轴承空隙过大,转动轴振动大。
The hand press is a small press work pressure equipment to use the rotating hand wheel and the drive shaft which joined together with the hand-wheel.
该手动压力机是利用旋转的手轮和与手轮联接在一起的轴来带动压力机进行工作的小型压力设备。
To refit a crank-shaft press into P/M automatic press is a common way for some small-scale factories.
利用曲轴冲床改装为粉末冶金自动压机,是一些小型企业常用的方法。
The balancing shaft will be driven by a small electric motor (on the left) via a belt.
平衡轴将推动一个小型电动马达(左侧)通过皮带。
Motorcycle disk brake is widely used because of its small radial dimensions, axial application of force along the disk when braking, no bending moment on brake shaft and braking stability.
摩托车液压盘式制动器径向尺寸较小,制动时沿制动盘的轴向施力,制动轴不受弯矩,制动性能稳定,应用较广。
Newly developed three ring gear reducer is comprised of synchronous belt, big and small pulleys, crankshaft, drive ring plate, output shaft, external gear and case.
设计的新型三环减速器主要由圆弧齿同步齿形带、小带轮、大带轮、曲柄轴、传动环板、输出轴、外齿轮和箱体等组成。
The voltage between the system and generator must be small enough to ensure minor current in the armature winding of generator, avoiding the impact to the coupling shaft.
发电机电压与系统电压之差必须足够小,避免合闸时发电机电枢绕组电流过大,对发电机联轴系统产生冲击。
And the selected dynamic part takes the direct driving plan with hollow hydraulic motor and has the advantages of light, cheap and small volume in the direction of shaft.
动力头采用中空式液马达直接驱动方案,具有重量轻、成本低、轴间尺寸小等优点。
Servo is a small device that has an output shaft.
舵机就是一种有输出轴的小传动装置。
Small white sails beat downriver under a threatening mass of indigo cloud, and out at sea the great high-sided bulk of a passenger ferry is dazzlingly illuminated in a sudden shaft of sunlight.
点点白帆迎着大团紫黑色的雨云顺流疾驰,忽而一道阳光透过云层,在跨海渡船高高的船帮上反射出眩目的光亮。
Chunlong Group designed Single Shaft Electric Wrench, which is small in size, light in weight and precise in torque.
公司设计的单轴智能电动扳手,体积小,重量轻,扭矩精确。
The results indicate that the mistake choice of material, unreasonable quench temperature and too small region of MF quenching are the cause of transmission shaft fracture.
结果表明材料选择错误、淬火温度不当,以及中频淬火区域过小是导致传动轴断裂的原因。
The utility model relates to a wind-driven generator, particularly to a small wind-driven generator with a vertical shaft, which is suitable for a family.
本实用新型涉及一种风力发电机,特别涉及一种小型的适于家庭使用的垂直轴风力发电机。
Too much lip-axis will increase the load-side contacts, while the shaft is too small it will end lip of the seal contact surface pressure enough.
过大的轴会增加唇端的接触载荷,而过小的轴则会使唇端接触面上的密封压力不够。
These new small diameter domestically made stainless steel rings are perfect to fit right under the head of your shaft.
简单翻译这些新的小直径国产不锈钢戒指是完美的,以适应下的权利的轴头。
This paper deals with the basic principle of measuring residual stress in spindle shaft or in workpiece of small radius.
本文讨论测定锭杆或小半径工件残余应力的基本原理。
Some methods raised in this paper which is reduced the weight of gear, shaft, box and clutch for HURTH gearbox, are offered effectively ways for small-scale design of the gearbox.
文中提出了减轻汉斯齿轮箱的齿轮、轴、箱体和离合器重量的一些方法,为齿轮箱的小型化设计提供了有效途径。
Pressure ball machine parts have hollow shaft, wheel, small gear tooth circle, roller skin, motor, etc.
压球机零件有中空轴、齿圈轮、小齿轮、辊皮、电机等。
The phase and frequency between the system and generator must be small enough to ensure minor current in the armature winding of generator, avoiding the impact to the coupling shaft.
避免由于压差、频差和相角差太大,使的合闸时,发电机组电枢绕组电流过大,对发电机组联轴系统产生冲击。
A small switching gear, a contrate gear shaft respectively fixedly connected with a big chain wheel and a big gear, a speed change gear set and a generator set are arranged in the casing.
外壳内,设有小切换齿轮、分别与大链轮和大齿轮固连的端面齿轮轴、变速齿轮组和发电机组。
The small metal shaft will be removed, and I ll drill a hole to accept the radar shafts.
小金属轴将被删除,我会钻一个孔,接受雷达轴。
In this paper, the strength problem is solved for the crank shaft with a big radius circular cross-section and small eccentricity by using spacial finite element method.
本文用空间有限元理论解决了半径较大、偏心较小的圆截面曲轴强度计算问题。
In this paper, the strength problem is solved for the crank shaft with a big radius circular cross-section and small eccentricity by using spacial finite element method.
本文用空间有限元理论解决了半径较大、偏心较小的圆截面曲轴强度计算问题。
应用推荐