The technics of making thin lead-acid batteries plates by slurry method was proposed.
提出采用拉浆工艺制备铅酸蓄电池薄型极板。
This article studied dry process of PPS prepreg which is impregnated with slurry method through the use of orthogonal experiment method.
本文采用正交试验设计法，成功地筛选出聚苯硫醚(PPS)泥浆干燥工艺参数。
The results showed that the thin plates produced by slurry method could improve the utility of active material and the ability of high-rate discharge performance.
实验结果证明：拉浆法制造的薄极板可以提高活性物质的利用率，改善了电池的大电流放电能力。
The results indicate that the semi-solid slurry with much finer and uniformer primary phase particles is gained by self-inoculation method.
结果表明，通过自接种法得到具有更细的单相颗粒的半固体泥浆。
Research method and main results is as following: Using electrical resistance furnace and cooling slope to melt A356 aluminum alloy and gain the semi-solid slurry.
研究方法和主要成果如下：使用电阻炉熔炼a356铝合金，并采用斜坡冷却法进行半固态熔体的制备。
Slurry electrolysis process, which is researched on the basis of analyzing the main problems in heavy non-ferrous hydrometallurgy, is a clean, energy efficiency extractive metallurgical method.
在对重有色金属湿法冶金存在主要问题进行分析的基础上研究成功的矿浆电解新技术，是一种清洁、高效的提取冶金。
A simple and rapid method is proposed for the determination of bismuth in geological materials which combines slurry technique with hydride generation atomic fluorescence spectrometry.
本文提出了一种把悬浮液技术与氢化物发生法相结合原子荧光光谱法测定化探样品中痕量铋的分析方法。
Aiming at the difficulty in measuring the rheologic parameters of high density slurry, a new method was suggested.
针对高浓度浆体流变参数测定难的问题，提出了一种新的流变参数测定方法。
Slurry casting method is a general technology for making material, which can make large-scale cermet.
粉浆浇注法可以解决钢模压制较大尺寸试样因受力不匀而发生裂纹甚至断裂的问题。
This paper discussed the relationship between solid content and density of aluminium hydroxide slurry and describes the measurement method and in situ applications of isotopic densitometer.
本文讨论了氢氧化铝料浆的固体含量和密度之间的关系及固体含量的密度检测方法。介绍了同位素密度计的现场应用情况。
The green body was formed by slurry spray method on the Q235 steel substrate.
用料浆喷涂法在Q235钢基体上成形覆层坯体；
This paper expatiated the components of ceramic slurry and its blending method under low temperature condition.
讨论了低温条件下陶瓷浆料的组分和配制方法。
Several traditional method of making lime slurry and disadvantages are discussed. A new rotative slaker has been put forward. Its working principle and characteristics are stated in detail.
阐述了石灰浆制备的几种传统方法及其缺陷，提出槽式回转搅拌化灰机是一种新型高效率的化灰系统，并详细说明了其工作原理及特点。
The experiment of producing heavy traffic paving asphalt was carried out with the FCC slurry and the propane deasphalted asphalt as the feedstock by uniform prescription design method.
以FCC油浆和丙脱沥青为原料，采用配方均匀设计方法，进行调合生产重交通道路沥青的研究。
In view of the property of slurry and the peculiarity of true soil, the mechanism of slurry dado with concrete curtain wall method in shaft excavation has been studied in this paper.
本文从泥浆的性能和土层的特点出发，对混凝土帷幕凿井法泥浆护壁机理进行了研究。
Solvent extraction experiment has been done, in which the feedstock of xinjiang vacuum residue was mixed with RFCC slurry by the method of Supercritical Fluid extraction and Fractionation (SFEF).
以新疆减压渣油中掺入不同比例的重油催化裂化油浆为原料，在超临界流体萃取分馏装置上，进行丁烷脱沥青试验。
The method of cement slurry injection through big-shift directional drilling and its technological parameters used in Gaoyang Iron Ore Mine to seal underground water rushing are introduced.
详细介绍了高阳铁矿实施大位移定向钻孔注浆方法和工艺参数，其成功的经验对治理矿山井下突水淹井事故具有一定的参考价值。
New construction method is adopted in aspects of ruling, alignment, measurement and welding so that construction quality of oil slurry nozzle can assured.
在划线、组对、测量、焊接方面采用了新的施工工艺，保证了油浆喷嘴的施工质量。
A method for calculating the slurry concentration inside the reactor was developed in this paper through determining the slurry density of polypropylene with double - flange pressure transmitter.
论述了通过双法兰差压变送器测定聚丙烯浆液密度，从而求出聚合反应釜中浆液浓度的方法，并进一步讨论了浆液浓度与平均停留时间、料位和聚合量等工艺参数之间的关系。
The invention relates to a fibre composite granule prepared by paper-making slurry and a preparation method thereof.
本发明涉及一种用造纸泥浆制备的纤维复合颗粒及其制备方法。
The cementing job quality was successfully controlled by means of carrying out the cementing design plan of wall shear stress and the leakproof method by raising slurry viscosity.
通过实施壁面剪应力固井设计方法和提高水泥浆粘度的防漏方法，成功实现了对固井质量的控制。
Applying two phase flow theory to the design of slurry pump is a key method for improving the machine.
研究泵的两相流设计技术是提高渣浆泵性能的根本途径。
Construction technology of slurry seal is economic, rapid, effective method of pavement surface treatment, especially suiting to preliminary maintenance of pavement.
稀浆封层施工技术是一种经济、快速、有效的路面表面处治方法，尤其适于路面的早期养护。
At present the large diameter slurry pipe jacking is the preferred construction method in project of urban water supply and drainage pipe and electric power pipe.
目前，大直径泥水平衡顶管掘进已成为城市给排水水管、电力管线工程等首选的施工方法。
A settlement computation method to the composite foundation composed of slurry wall-pile-box or thick raft is proposed, which is defined in the paper as two-stage settlement computation method.
提出了由地下连续墙-桩-箱或筏所构成的复合基础的沉降计算方法，该方法定义为二阶段沉降计算方法。
The weight method is used to measure the solid quantity (catalyst contain) in slurry oil of catalytic cracking unit.
采用重量法测定催化装置油浆中的固体含量(催化剂含量)。
Variable Angle spiral method was used in a trial way in the design of the warped blader of solid - liquid two phase slurry pump.
采用变角螺旋线法对固液两相流渣浆泵扭曲叶片进行了尝试性设计，并初步总结了其设计方法和规律。
It is believed that the slurry making method using electromagnetic stirring which is contactless stir ring will be suitable for high melting point iron and steel material.
笔者认为电磁搅拌制备浆料方法中的搅拌是无接触搅拌，更适用于高熔点钢铁材料。
The study demonstrates that this method is simple, applicable, scientific, and rational, which can simulate the real bonding situation between the wellbore and the cement slurry.
研究结果表明，该评价方法简单适用，科学合理，较为真实地模拟了井壁岩石与水泥浆的胶结情况。
Paving slurry seal course made of SBR emulsified asphalt is an effective way for asphalt pavement maintenance, and we have had good command of this method after many trials.
采用丁苯胶乳改性乳化沥青，按适当的比例配制成稀浆铺筑沥青路面。稀浆封层是今后路面养护的主要措施。
应用推荐