Methods The titer and affinity of anti-A secreted by hybridoma were tested by tube method and slide method.
通过试管法和玻片法检测抗a抗体的效价和亲和力。
This paper describes calculation method and program of lifting technology of single crane with slide method.
本文介绍了单吊车滑移法吊装工艺计算方法及其程序设计。
The frequently used methods of the stability analysis are circular slide method and ground bearing capability method.
稳定分析常采用的计算方法是圆弧滑动法和地基承载力法。
The basic method and merit of BF push technology are briefly introduced. Through example, the result and construction techniques of BF push by slide method are discussed.
较详细地介绍了高炉推移的优点和基本方法，并用实例论述了采用滑动法推移高炉的施工技术和效果。
After this method is invoked, the master page is applied to the new slide.
调用该方法后，母版页就应用到新幻灯片。
Unlike Dr Fodor's method, the Stanford researchers used pre-synthesised DNA strands, called probes, that were placed or “spotted” on the slide by a robot.
与Fodor博士不同的是，斯坦福的研究者利用被称为“探针”的合成前DNA链，然后将其利用机器人放置或“标记”在载玻片之上。
This paper introduces a simple graphic method for designing the planar crank slide block mechanism with urgent returning specific property and gives theoretical proof.
介绍了设计有急回特性的平面曲柄滑块机构的简易图解法，并给出了理论证明。
This paper analyses grouting reinforcement's influence on slide plane and surrounding rock stability during the construction in Caijiapo tunnel, using the elastoplastic finite element method.
采用弹塑性有限元法分析了柴家坡隧道在施工过程中注浆加固对滑动面和围岩稳定性的影响。
If the section is a circular arc in the spatial slanting plane, the circular arc is the extremely reasonable bore hole path curve for slide drilling in minimum curvature method.
在此方法中，假设井段是空间斜平面上的圆弧，对于滑动钻进方式，圆弧是非常合理的井眼轨迹曲线。
In this paper, the dynamic stiffness matrix method is used to predict the vibration of the crankshaft system and to calculate the input exciting force from the crankshaft to the slide rod.
在曲轴系统的振动预测中应用动刚度矩阵法，计算从曲轴向滑块的激振力输入，建立了动力传动装置全系统的有限元模型，并采用该模型进行了振动的预测计算。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
介绍大屏幕彩色电视机前壳注射模结构，重点介绍侧抽芯大滑块的设计，顶出机构和进浇方法的改进。
Occurrence conditions of liquefaction for loess and the judgment method of flow slide of saturated loess by steady state strength are presented.
提出了饱和黄土流滑破坏的产生条件和利用稳态强度判断饱和黄土能否产生液化流滑的方法。
Applying the theory of slide line field, the paper discusses the method of determining the sizes of blank for square box and gives the relevant calculating formulae.
本文应用滑移线场理论，研究了方盒形件拉深毛坯的展开尺寸计算方法，给出了有关的计算公式。
This paper proposes a method of above-water photogrammetry and investigates the theories and methods of plotting the slide topography in the deformed area of the reservior's bank.
本文提出用水上摄影测量方法，在水电站库岸变形滑坡地段，进行滑坡地形测图的理论和方法的研究。
Application this method of search slide surface of slope, the different slope parameters to effect of the position of dangerous slide surface and safety factory have been discussed.
应用这种搜索边坡滑动面的方法讨论了不同参数对边坡滑动面位置及安全系数的影响。
A feature based dynamic slide match method for recognizing holes type extracting holes shape and location parameters from CAD exchange files is propsed.
提出了一种基于特征的动态滑动匹配算法，用于从零件CAD产生的图形交换文件中识别基孔类型、提取基孔的形位参数。
Main factors of influencing slide moving accuracy of two poi nt press have been analysed and solving method proposed.
分析了影响双点压力机滑块运动精度的主要因素并提出了解决的办法。
Based on the principle of the spatial inversion, this paper proposes a new method of determining the stroke of the slide block of the spatial slider-crank mechanism by way of descriptive geometry.
本文根据空间反演变换的原理，运用画法几何的方法，对空间曲柄滑块机构滑块行程的确定，提出了一种新的图解法。
The reliability of a slope with several slide surfaces is also analyzed by using narrow bounds method, and considering the slope as a series system.
把多滑面边坡看成一个串联系统，采用系统可靠性的上下界法对边坡的失稳进行可靠性分析。
An adaptive fuzzy slide tracing control method is presented for a class of unknown nonlinear systems.
针对一类不确定非线性系统提出了一种自适应模糊控制方法。
Finally, the regional slide erosion is quantitatively evaluated by method of information quantity theory.
利用信息量理论对典型区域滑坡侵蚀进行定量评价研究等。
The allied toxicity of pyridaben and diesel oil or clofentezine were measured in laboratory by slide slip method.
采用玻片浸渍法，进行了哒螨灵与柴油或四螨嗪混用对山楂叶螨的室内联合毒力测定试验。
The specific step and process are introduced in detail with the adoption of this method in the design of the automatic slide fastener assembly machine.
较详细介绍了该方法在拉链头自动装配机设计中运用的具体步骤和过程。
The thesis puts forward the pile-top displacement control method, and it can account the least force of the anchor wire on anti-slide pile.
本文提出了锚拉抗滑桩锚拉力计算的桩顶位移控制法，计算控制桩顶位移所需的最小锚拉力。
A simple and quick inspection method is now needed, since almost any well washed slide appears immaculately clean under normal room light.
洗好的衬底需要有简单而快速的检验方法，因为在普通室内光线照射下几乎所有很好清洗过的衬底看起来都是十分清洁无瑕。
T his paper analyzes concrete status of the slide slope and treatment principle, offers the treatment scheme of adopting frame type slide-resistance pile, and describes related construction method.
文章分析了该滑坡的具体情况和治理原则，提出了采用框架式抗滑桩的治理方案，并介绍了具体的施工方法。
At present, sunken anti-slide piles 'design is on junior phase, people have not established a mature and practical design method, and their work mechanism is not well known by us.
目前埋入式抗滑桩应用还处于探索阶段，尚未有成熟的基础理论和实用设计方法，人们对其工作机理不甚清楚。
The ground coefficient method is commonly used for internal force calculation for anti-slide piles and anchor caverns.
工程中常用的抗滑桩和锚固洞的内力计算方法多为地基系数法。
Common problems consisting in the slide position control in the current mechanical press are discussed, and the feasibility of using the iterative learning method is analyzed.
讨论了目前机械压力机滑块位置控制中普遍存在的问题，分析了迭代学习方法在压力机滑块位置控制中应用的可行性。
Common problems consisting in the slide position control in the current mechanical press are discussed, and the feasibility of using the iterative learning method is analyzed.
讨论了目前机械压力机滑块位置控制中普遍存在的问题，分析了迭代学习方法在压力机滑块位置控制中应用的可行性。
应用推荐