This method is called the lift-slab method.
这种方法叫做升板法。
The formula of tube expanding force is deduced using the slab method.
采用主应力法推导圆管扩径时扩径力的解析式。
The formula of drawing force for cold-drawn inner fin tube is derived with slab method in this paper.
采用工程法推导了冷拔内直筋管拔制力的计算公式。
Forming force during backward extrusion of hollow billet was analyzed by slab method and numerical simulation.
采用主应力法与数值模拟相结合的方法，研究分析空心坯料反挤压成形力变化规律。
The static equilibrium differential equation of the casting zones and rolling zones during roll casting process is deduced respectively using slab method.
利用切块法分别推导出了铸轧过程上述两区的静力平衡微分方程。
The basic theoretical methods such as Slab method, UBET, Slip Line method, FEM, and FVM have been used in the research of metal plastic forming technology.
研究金属塑性成形规律的理论方法现在有主应力法、上限法、滑移线法、有限元法和有限体积法。
In addition, according to experimental results, slab method in plastic mechanics and material hardening theory, a new formula for hole flanging force is concluded.
另外，根据试验结果，并利用塑性力学中的主应力法和材料硬化理论，推导了一个计算圆孔翻边力的新公式。
This paper introduces an unbonded post-tensioned grid slab floor system with a suspended mezzanine underneath for ventilation installations constructed by lift-slab method.
本文介绍一种新的结构体系——无粘结预应力井式梁板、悬挂技术夹层升板结构。
The distributed pressure on the interface was obtained using the slab method. Analytic formula of the microconvex surface of plano-sizing die for long rectangular plate has been derived.
利用主应力法求出接触面上的分布压应力，导出了平面精压长矩形板模具表面微凸面形状的解析公式。
The section design method of slab strips for reinforced concrete and post tensioned concrete slabs is discussed in detail.
详细讨论了基于有限元分析的钢筋混凝土和预应力混凝土楼板的板带截面设计方法。
In combination of typical project case, the detail discussion on correlative factors in toe slab design and design method are carried out.
结合典型的具体工程实例，对目前采用的趾板设计的方法、趾板设计中应考虑的相关因素进行了较详细的讨论。
Inheritance of PGI isozymes in chestnut species was analyzed using isoelectric focusing on thin layer polyacrylamide slab gels and single tree progeny method.
采用超薄聚丙烯酰胺平板凝胶等电聚焦电泳和单株后代法，分析了栗属种的PGI同工酶的遗传。
Basic principle and implement method of slab cutting length computation model in No 3 CC of Baosteel are introduced.
主要介绍在宝钢3号连铸机上投运的板坯切割长度计算模型的基本原理及实现方法。
Using the theory of design on plate deformation, with attainment of high yield, we can find mathematics model and method on slab calculation.
利用中板变形规程的设计原理，以提高成材率为目标，得到了坯料计算的数学模型及基本方法。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
By take qualitative analyze support force states on bridge head bridging slab to advanced relevant reinforcement method.
通过对桥头搭板的受力情况进行定性的分析，提出了相应的配筋方法。
The paper analyses the stability of rib slab on method of energy, the formula of longitudinal critical force is deduced, and rational arrangement of stiffening rib is discussed.
利用能量法分析了加肋平板的稳定问题，推导了纵向临界力的计算公式，并探讨加劲肋的合理布置。
By application of the conformal mapping method, the light wave in a slab taper with inhomogeneous-index is investigated.
应用保角度变换法，研究了非均匀折射率的平板渐变器中的光波问题。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
The application and measuring method of a slab surface temperature measuring system for secondary cooling zone of continuous casting are introduced.
本文介绍一个连铸二冷区铸坯表面温度测量系统的测量方法和实际应用情况。
Through the analysis of the stress characteristics of the circular pipe cavity mushroom floor, this paper analyzes the calculating model and method of the floor slab.
通过分析圆管式空心无梁楼盖的受力特点，分析了此楼板体系的计算模型及计算方法。
Five of these anchor slab structures were analyzed by finite element method in plane strain case, and the results of analysis are fairly close to the data obtained from field observations.
本文用有限单元法按平面形变情况分析了五座锚定板挡土结构，发现分析结果与现场实测数据相当接近。
A numerical model calculating displacement of jointed slab on void foundation is established with finite element method.
用有限单元法建立了可考虑接缝和地基脱空的弹性地基板位移计算模型。
The design parameters and the calculating method of the slab thickness were given.
确定了结构设计参数及路面板厚度计算方法。
For design of foundation slab, method of evaluating coefficients of foundation bed has been introduced in the design Code for Dry Dock.
对基础板的设计，干船坞设计规范中介绍了地基基床系数的取用方法。
The method, formulas and flow chart of computing program GBHST for reinforced concrete slab design are introduced in detail.
本文详细介绍了钢筋混凝土盖板涵设计计算程序gbhst的方法、公式和流程图。
The method, formulas and flow chart of computing program GBHST for reinforced concrete slab design are introduced in detail.
本文详细介绍了钢筋混凝土盖板涵设计计算程序gbhst的方法、公式和流程图。
应用推荐