The thin slab continuous casting and rolling process is a reforming technology in the steel industry, and it should be mastered and promoted step by step in China.
薄板连铸连轧工艺是钢铁工业的重大变革技术，要切实掌握和逐步推广。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
It shows that thin slab continuous casting has a greater secondary cooling intensity, a faster solidifying rate, a fine and uniform structure and less segregation than conventional slab casting.
研究表明，薄板坯的二冷强度大，凝固速度快，组织细小、均匀，其内部溶质元素的偏析程度远低于传统连铸板坯。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
It showed that EMBR could control vortex and improve the flow field in the thin slab continuous casting mould effetely.
计算表明，电磁制动对于抑制涡旋、改善薄板坯连铸结晶器中的流场有明显效果。
The thin slab continuous casting technique had been adopted in metallurgical production to gain the remarkable benefits.
薄板坯连铸技术已应用于冶金生产并取得显著效益。
The longitudinal surface crack on thin slab is a serious quality defect at thin slab continuous casting and rolling process.
薄板坯表面纵裂是连铸连轧生产线上的严重质量缺陷。
The production and technical situation of thin slab continuous casting with FTSC process in Tang Steel are introduced briefly.
简要介绍了唐钢FTSC工艺薄板坯连铸的生产技术情况。
A numerical model for the solidification process of slab continuous casting was built by nonlinear finite element software MARC.
利用非线性有限元软件MARC，建立板坯连铸凝固过程的数学模型。
The vortex flow and mold flux entrapment in the thin slab continuous casting mold was investigated using a 1/4 scale water model.
利用1/4水模型对薄板坯连铸结晶器内的涡流及卷渣行为进行观察研究。
In order to solve the production-matching problem of the slabs and the plates, Jigang built the new slab continuous casting machine.
为了解决连铸坯与中厚板材生产不匹配的问题，济钢新建了板坯连铸机。
The several aspects to be considered in the construction of the thin slab continuous casting and rolling line are highlighted in this paper.
文中着重讨论了薄板连铸连轧生产线建设中应研究的有关问题。
Electromagnetic braking on flow field of molten steel in the thin-slab continuous casting mold is analyzed by mathematical modeling and experiment.
采用模型实验结合数值模拟的方法分析了薄板坯连铸结晶器的电磁制动过程。
The production of stainless steel flat products can be realized by adopting medium-sized slab continuous casting and continuous rolling technology.
利用中厚板坯连铸连轧生产不锈钢是可行的。
The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.
对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比，介绍了该生产线在带钢轧制中所采取的主要质量控制手段。
This program was applied to calculate the temperature distribution of copper thin-slab continuous casting with different casting speeds and cooling conditions.
利用该程序计算了不同拉速及冷却条件下，铜薄板连铸过程中温度场的分布，并分析了拉速、冷却条件对铸坯温度的影响。
In order to reduce the inclusion quantity in the stainless steel slab, water-modeling experiment of stainless steel slab continuous casting tundish is launched.
为减少不锈钢连铸坯中夹杂物的数量，开展了不锈钢板坯连铸中包水模实验。
A new flow control device, turbulence inhibitor, has been developed for the tundish of slab continuous casting in No. 2 Steelmaking Plant, AISCO by experiments.
结合鞍钢第二炼钢厂板坯中间罐控流装置，通过实验室对比试验研究，开发了一种新型控流装置——湍流控制器。
Images of bubble movement in a water model of slab continuous casting mold were acquired by a high speed video camera and processed by image processing software.
使用高速摄像仪采集了板坯连铸结晶器水模内气泡运动的图像，对图像进行了数字处理。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
An inverse problem model of mould heat transfer in slab continuous casting is researched and built aiming at the installation characteristics of thermocouples in slab mould.
针对板坯结晶器热电偶的排布特点，研究并建立板坯连铸结晶器传热反问题的数学模型。
On the basis of the need on developing guide roller of Baosteel plate slab continuous casting machine, the two belt electrode build-up welding machines were designed and manufactured.
根据开发宝钢板坯连铸机导辊产品的需要，设计并制造了两台带极堆焊机。
Using incompressible MHD equations and zero equation turbulent model, the paper calculated the flow field in two dimension thin slab continuous casting mould with the electromagnetic brake(EMBR).
本文采用不可压缩MHD方程及零方程湍流模式，数值计算了加电磁制动器的二维薄板坯连铸结晶器中的流场。
The new flow control devices, turbulence inhibitor and wall gas blowing, have been developed for the tundish of slab continuous casting in No. 2 Steelmaking Plant, BENXCO by compared experiments.
结合本钢炼钢厂板坯中间罐的控流装置，通过实验室对比试验研究，开发了新型控流装置——湍流控制器和微细泡气幕挡墙。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
介绍了连铸连轧法生产电解铜始极片的新工艺。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
介绍了连铸连轧法生产电解铜始极片的新工艺。
应用推荐