The paper analyses the stability of rib slab on method of energy, the formula of longitudinal critical force is deduced, and rational arrangement of stiffening rib is discussed.
利用能量法分析了加肋平板的稳定问题，推导了纵向临界力的计算公式，并探讨加劲肋的合理布置。
Basic principle and implement method of slab cutting length computation model in No 3 CC of Baosteel are introduced.
主要介绍在宝钢3号连铸机上投运的板坯切割长度计算模型的基本原理及实现方法。
Inheritance of PGI isozymes in chestnut species was analyzed using isoelectric focusing on thin layer polyacrylamide slab gels and single tree progeny method.
采用超薄聚丙烯酰胺平板凝胶等电聚焦电泳和单株后代法，分析了栗属种的PGI同工酶的遗传。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
In the paper, the general calculating method of analysing the bearing force on slab arch bridge is derived according to the energy principle.
本文根据能量原理导出了板拱桥受力分析的一般计算方法。
The parameters of the optical slab glass waveguide (refractive index and thickness of thin film) were measured by a new technique for using the prism coupler, i. e., leaky mode method.
由使用棱镜耦合器的一种新技术即漏模法，测量了平板玻璃光波导的参数(薄膜的折射率和厚度)。
The paper introduces the construction method and procedure of heat insulating by benzene slab in the aqueduct construction of Dalian diversion water from Biliuhe reservoir.
文章介绍了大连引碧渡槽施工中应用苯板保温的施工方法、施工程序。
The design parameters and the calculating method of the slab thickness were given.
确定了结构设计参数及路面板厚度计算方法。
The application and measuring method of a slab surface temperature measuring system for secondary cooling zone of continuous casting are introduced.
本文介绍一个连铸二冷区铸坯表面温度测量系统的测量方法和实际应用情况。
Through the analysis of the stress characteristics of the circular pipe cavity mushroom floor, this paper analyzes the calculating model and method of the floor slab.
通过分析圆管式空心无梁楼盖的受力特点，分析了此楼板体系的计算模型及计算方法。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
A simplified method is presented for calculating the partial shear connection strength of a composite slab with profiled steel sheeting subjected to loads of various patterns.
提出多种荷载作用下，简支压型钢板-混凝土组合板承载力的部分剪力连接简化计算方法。
Five of these anchor slab structures were analyzed by finite element method in plane strain case, and the results of analysis are fairly close to the data obtained from field observations.
本文用有限单元法按平面形变情况分析了五座锚定板挡土结构，发现分析结果与现场实测数据相当接近。
The basic theoretical methods such as Slab method, UBET, Slip Line method, FEM, and FVM have been used in the research of metal plastic forming technology.
研究金属塑性成形规律的理论方法现在有主应力法、上限法、滑移线法、有限元法和有限体积法。
By application of the conformal mapping method, the light wave in a slab taper with inhomogeneous-index is investigated.
应用保角度变换法，研究了非均匀折射率的平板渐变器中的光波问题。
For design of foundation slab, method of evaluating coefficients of foundation bed has been introduced in the design Code for Dry Dock.
对基础板的设计，干船坞设计规范中介绍了地基基床系数的取用方法。
The existing experimental method cannot accurately calculate the ultimate carrying capacity of the reinforced concrete slab column connections subjected to moment and shear.
现有的经验方法无法准确计算同时传递竖向剪力和不平衡弯矩的钢筋混凝土板柱中节点的极限承载力。
A numerical model calculating displacement of jointed slab on void foundation is established with finite element method.
用有限单元法建立了可考虑接缝和地基脱空的弹性地基板位移计算模型。
The ray optics and wave optics methods for slab waveguides are also explained while the Marcatili's method and the effective index method are introduced for channel waveguides.
研究了平面平板波导的射线理论分析法和电磁场分析法，条形波导的马卡梯里法和等效折射率法。
In order to design irregular prestressed concrete floor, formulas of anisotropic finite element method to analyze the internal force of prestressed concrete hollow slab have been presented.
考虑预应力混凝土空心板的构造特点，推导了进行板内力分析的各向异性有限元法公式。
In addition, according to experimental results, slab method in plastic mechanics and material hardening theory, a new formula for hole flanging force is concluded.
另外，根据试验结果，并利用塑性力学中的主应力法和材料硬化理论，推导了一个计算圆孔翻边力的新公式。
Forming force during backward extrusion of hollow billet was analyzed by slab method and numerical simulation.
采用主应力法与数值模拟相结合的方法，研究分析空心坯料反挤压成形力变化规律。
The section design method of slab strips for reinforced concrete and post tensioned concrete slabs is discussed in detail.
详细讨论了基于有限元分析的钢筋混凝土和预应力混凝土楼板的板带截面设计方法。
By using the method of tectonic slab mapping in the continental orogenic belt, the authors carried out a systematic study of the Tazang tectonic belt of Jiuzhaigou.
运用大陆造山带构造岩片填图方法，首次对九寨沟塔藏构造带进行了系统研究，认为塔藏构造带为一构造混杂岩带。
The method, formulas and flow chart of computing program GBHST for reinforced concrete slab design are introduced in detail.
本文详细介绍了钢筋混凝土盖板涵设计计算程序gbhst的方法、公式和流程图。
This paper presents bridging slab and asphalt overlay method that is to widen the top of joint and crack and then fill with new concrete and overlaying with asphalt concrete.
提出将旧板接裂缝顶部拓宽再采用水泥混凝土搭板来处理接裂缝，然后进行沥青罩面的方法，称为搭板罩面法。
The distributed pressure on the interface was obtained using the slab method. Analytic formula of the microconvex surface of plano-sizing die for long rectangular plate has been derived.
利用主应力法求出接触面上的分布压应力，导出了平面精压长矩形板模具表面微凸面形状的解析公式。
The distributed pressure on the interface was obtained using the slab method. Analytic formula of the microconvex surface of plano-sizing die for long rectangular plate has been derived.
利用主应力法求出接触面上的分布压应力，导出了平面精压长矩形板模具表面微凸面形状的解析公式。
应用推荐