The sintering properties of specimens can be improved by staged reaction sintering.
采用分段反应烧成制度可以提高试样烧结性能。
The CVRD ore produced by Brazil has the features of high ferrous grade, few harmful impurities and good sintering properties.
巴西CVRD矿具有含铁品位高、有害杂质少、烧结性能良好的特点。
According to the research results, the well-selecting experimentation of the PS material is performed, and the basal material - PS3 whose sintering properties is better is acquired.
在此研究结论下，对PS材料进行了优选实验，得到了性能更好的烧结基体材料PS 3。
The result shows that adding alumina in the materials can promote its sintering properties, and improve its penetration resistance meanwhile don't effect to its corrosion resistance.
结果表明，添加高铝矾土能增强干式料的烧结性能，同时在不降低干式料抗熔渣侵蚀性的情况下提高了干式料的抗熔渣渗透性。
In this thesis, some test methods, such as Heating Microscope, DTA-TG, Thermal Dialation Testing, were used to research the sintering properties of cemented carbide in submicron grain, systematically.
采用高温显微镜、同步热分析、热膨胀实验等方法，系统的研究了亚微细硬质合金的烧结特性。
The microstructure and mechanical properties of the alloy under the conditions of vacuum sintering and hot isostatic pressing sintering were investigated.
研究了合金在真空烧结和热等静压烧结条件下的显微组织和力学性能。
The low sintering and low dielectrics substrate materials and their properties, and the organic additives for tape casting slurry are compared and analyzed.
对目前已研究和使用过的低介电常数和低烧结温度基板材料及综合性能，流延浆料有机添加剂进行了对比分析。
The selection of the sintering parameters has effect on the mechanical properties of the sintering materials to some extent.
烧结参数的选择对烧结材料的力学性能有一定的影响。
Sintering AIDS were one of key factors affecting microstructure and properties of silicon nitride ceramics.
烧结助剂是影响氮化硅陶瓷的显微结构和性能的关键因素之一。
The effect of hot pressing sintering temperature, pressure and time on its properties are investigated by means of orthogonality rejection and variance analysis.
采用正交设计和方差分析的方法研究了热压烧结温度、压力、时间对该砂轮性能的影响。
According to beam properties of the CO2 laser in the laboratory and light spot requirement for laser sintering, a set of laser beam homogenizing equipment is designed in this thesis.
针对实验室用大功率CO2激光的光束特性和烧结陶瓷实验时对光斑的特定要求，本研究从理论设计了一套激光均束装置。
A support material with low expansivity and high conductivity, called DG alloy, was prepared by powder metallurgy. The effects of sintering process on its properties and microstructure were studied.
采用粉末冶金技术制备了一种低膨胀高导热支撑材料(简称DG合金)，研究了烧结工艺对合金组织和性能的影响。
The mechanical properties results show that the fracture toughness and Vickers hardness of the 70W_2B_5/C composite increase with the sintering temperature.
力学性能测试结果表明，随着烧结温度的升高，70W_2B_5/C复合材料的断裂性与维氏硬度均增加。
The results indicated that the properties of alloys were greatly increased under certain proportions of nanometer Ni powder and sintering temperatures.
结果表明，在适当比例的纳米镍粉及烧结温度下，合金的性能得到很大的提高。
Properties of Products: low porosity bricks USES low mullite stones as main raw material, main mineral compositions are mullite phases after pressing sintering.
产品特点：低气孔率粘土砖是采用低氯莫来石为主要原料，经高压成型、高温烧结而成，主要矿物组成为莫来石相。
The effect of the sintering temperature and the mullite content on the dielectric properties and the bending strength has been studied.
研究了烧结温度和莫来石含量对复合材料的介电性能和抗弯强度的影响。
The right choice and control of the sintering atmosphere is very important for the properties of sintered components.
烧结气氛的正确选择及其控制对烧结后部件的性能至关重要。
The effects of pressure and sintering process on the microstructure and properties of the materials were investigated.
研究了压制压力、烧结工艺对材料微观组织及性能的影响。
Effect of superfine Ni powder addition on the sintering process and final properties of driven gears was studied.
研究了经超细化处理的镍粉对从动齿轮烧结工艺和性能的影响。
The liquid synthesis of nanocrystals titania at low temperature, due to avoiding the sintering process, brings superior physical and chemical properties.
低温液相合成晶态纳米二氧化钛由于避免了高温煅烧过程，可望赋予其更优越的特性。
The influence of sintering temperature and holding time on the density, micro-structure and mechanical properties of the ceramic tool materials are studied.
对烧结温度、烧结时间等工艺参数对材料力学性能、微观结构和致密度的影响进行了分析。
Its physical and chemical properties have been improved by adding some binder aid and sintering aid.
通过加入助结合剂、助烧结剂等，提高了热补料的理化性能。
Sintering shrinkage, mechanical properties and the optimized sintering temperatures are also presented.
列举了烧结收缩、力学性能和最佳烧结温度等数据。
The present work was to determine the optimum sintering system and properties of the nanometer tetragonal polycrystalline zirconia green body by the aqueous gel tape casting process.
采用水基凝胶流延工艺制备四方多晶氧化锆薄膜，确定合理的烧成制度，并考察薄膜的显微结构与烧结性能。
The effects of the sintering additive on the densification , microstructure and mechanical properties of the composites were investigated.
研究了烧结助剂对材料致密化、显微结构及力学性能的影响。
The effects of sintering process on the properties of 4J32 low expansion alloys by powder injection molding were investigated.
研究了烧结工艺对粉末注射成形4J32低膨胀合金性能的影响。
During the experimental period sintering parameters were optimized and adjusted, which improved sintering indexes, such as tumbler strength, fuel consumption, sinter metallurgical properties etc.
试验过程中通过优化调整烧结操作参数等，提高了烧结矿转鼓强度，使燃料消耗下降，改善了烧结矿冶金性能指标。
The physical properties of carbon fibre reinforced silver and copper composites were measured to prove the effect of sintering processing on the properties of composites.
本文通过对碳纤维增强银、铜复合材料物理性能的测定证实了复合材料的烧结工艺对其物理性能存在显著影响。
The paper describes the study of influence of sintering temperature and other processing technologies on the physical properties of the cemented carbide sprayed powder.
本文探讨了烧结温度及其他加工工艺对硬质合金喷镀粉物理性能的影响。
The paper describes the study of influence of sintering temperature and other processing technologies on the physical properties of the cemented carbide sprayed powder.
本文探讨了烧结温度及其他加工工艺对硬质合金喷镀粉物理性能的影响。
应用推荐