So sintered temperature has no effect on the transformation of phase structure.
所以，烧结温度对相结构变化无影响。
With the slow of heat rate, prolong of soaking time and enhanced sintered temperature, the maximum transmittance was increased.
研究表明减慢升温速率、延长烧结时间、提高烧结温度可增加光透过率。
Based on the experiment we can include that the preparation of oil-cast nylon and the sintered temperature of composite is the pacing factor.
实验可知，油尼龙的制备与复合烧结温度是实验成败的决定因素。
However, the high temperature sintered body strength slightly lower, mainly for the use of low temperature environment.
但是烧结体的高温强度稍低，主要用于使用温度较低的环境。
In the hot repressing of the powder sintered preforms, the increasing forging force increases its densities at a constant temperature.
在相同温度下进行粉末烧结体热复压，锻造力的增加往往使锻造密度也增加。
The results showed that the distribution of temperature field is mainly affected by the gas flow path and the distributions of heating source, sintered products, and graphite boards.
认为石墨筒内的温度场分布主要取决于发热体、烧结制品和石墨舟皿的布置位置以及气体的流动方式。
The molybdenum sintered at lower temperature by SPS having higher hardness is due to fine grain strengthening.
SPS在较低温度下烧结的钼的硬度较高，原因是其晶粒较细。
In this paper, the influence of temperature and fuels etc to the wearing of the valve seats of sintered materials are introduced.
本文介绍了温度、燃料等对气门座磨损的影响及烧结材料气门座的特点。
With pure raw material shale, the tile is sintered in high temperature without glazed surface, and some products can be recycled and reused.
砖的成份单纯，主要以页岩为主，表面不施釉，产品经高温烧制，部分产品可以回收再利用。
Adding middle grade sintered magnesia powder can enlarge the line ratio and porosity after high temperature treatment.
中档镁砂粉的添加使浇注料高温处理后的线变化率增大和气孔率增加。
The hot compression test was performed, and the effects of the deformation rate, the deformation temperature, and the preparation process on mechanical property of the as–sintered alloys were studied.
对放电等离子烧结合金进行高温压缩试验，研究了变形速率、变形温度和试样制备工艺对合金力学性能的影响。
The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were studied systematically.
系统研究了激光功率、扫描速度、预热温度、铺粉厚度等工艺参数对成型试样质量的影响。
Raw graphite powder made from graphite ores and treated by various methods was sintered at high temperature to obtain higher pure graphite powder for synthesizing diamond.
对石墨矿石采用不同的处理方法得到了原料石墨粉，再经高温烧结获得了高纯度合成金刚石所需的石墨粉。
The wax models with high accuracy were sintered by filtering powder bed temperature of sintering process.
通过对烧结过程中粉床温度的筛选，烧结出尺寸精度较高的蜡模。
The present invention provides a stock material for cerium-based abrasives which can be sintered at a relatively low roasting temperature without causing abnormal growth of the particles.
本发明提供了铈股票物质基础，可在相对较低的焙烧温度下烧结颗粒造成的生长异常磨料。
In this paper, Bayer new red mud and the Yellow river sand as raw material, firing sintered brick According to different ratio and sintering temperature.
本文以拜耳法新赤泥和黄河河砂为原料，按不同配比和不同烧结温度进行烧结。
Optimize the dielectric properties of low temperature sintered microwave dielectric ceramics.
优化低温烧结微波介质陶瓷介电性能。
The nonlinear magnetic property of low temperature sintered Y-type ferroxplana was reported.
介绍了低温烧结Y型平面六方铁氧体的非线性磁性能。
Application of long-distance infrared temperature-measuring technology to the system of finished sintered product was introduced, through which the principle of this system was become clear.
通过对远程红外测温技术在烧结成品系统中应用情况介绍，说明了整个系统的工作原理。
The manufacture technology of sintered steel filter and influence of primary particle shape and size, pressing pressure and sintering temperature on filtering performance are discussed.
较详细地论述了不锈钢粉末冶金过滤器的制造工艺及原始粉末形状、粒度、压制压力和烧结温度对过滤性能的影响。
Adding appropriate additive to the calcium Oxide sintered in the high temperature, and controlling the process of hydration will make the expansion fully exert to the fragmentation of rock.
通过向高温死烧过的氧化钙中加入合适的添加剂，对水化过程进行控制，将膨胀能充分利用到介质破碎中。
It is stated that the high-temperature alloy powder sintered porous tubes have been used as the filtering articles in the activating apparatus applied in the petroleum-chemical industry.
叙述了高温合金烧结多孔管用作活化器过渡元件(石化工业用)的情况。
High temperature thermomechanical treatment (HTMT) is a kind of TMT. It has been applied in the production of sintered steel and powder forging steel.
高温形变淬火是形变热处理的一种，它在烧结钢和粉末锻钢的生产中得到了应用。
A new approach was presented for combining the medium-and-low temperature waste heat in sintered gas with methanol steam reforming to produce hydrogen.
提出了烧结机烟气中低温废热与甲醇蒸汽重整制氢整合的新方法，模拟建立了中低温废热结合甲醇重整制氢的系统。
Properties of Products: mullite bricks for blast furnaces were made from fused or sintered mullite, being high pressure pressed and sintered in high temperature, main minerals are mullite stones.
产品特点：高炉用莫来石砖采用人工电熔或烧结莫来石原料为主要原料，经高压成型、高温烧结而成，主要矿物组成为莫来石。
With high quality shale as raw material, the products are extruded by hard plastic vacuum technology and sintered in tunnel kiln by fuel gas with stable high temperature.
产品采用优质页岩为原料，经硬塑真空挤压成型，在隧道窑中用燃气恒定高温烧结而成。
After sintered at a low temperature, the agent was added to the glaze of a sanitary porcelain to produce a antibacterial ceramic.
将其低温煅烧后添加到卫生陶瓷釉浆中，可制得抗菌陶瓷。
HJA-7 and HJA-8 has a high sintered density, contraction rate, for the production of high-grade refractory materials, temperature, wear-resistant corundum products.
HJA - 7和HJA - 8具有较高的烧结密度，地收缩率，适用于生产高档耐火材料，耐温、耐磨刚玉制品。
HJA-7 and HJA-8 has a high sintered density, contraction rate, for the production of high-grade refractory materials, temperature, wear-resistant corundum products.
HJA - 7和HJA - 8具有较高的烧结密度，地收缩率，适用于生产高档耐火材料，耐温、耐磨刚玉制品。
应用推荐