With the use of KingView communication with single-chip, this design measures the analog signal and finally displays vivid image in PC.
利用组态王和单片机通信进行模拟量的测量，在PC上应用生动形象的画面进行显示；
The Service-evaluating System Based on AT89C series single-chip computer consists of a host, a lot of window evaluating device, and a PC.
基于AT89C系列单片机服务评价系统，由一台评价主控机、多台窗口评价器和一台PC机组成。
IBM PC and single chip microcomputer communication hardware circuit, software interface and measure to improve reliability of communication.
IBMPC机与单片机通讯的硬件电路、软件接口以及提高通讯可靠性的措施。
The hardware structure includes: wireless communication module, driving module, ranging module, vision module, etc. The control core of each module is the single chip microcomputer and PC.
其硬件结构主要由无线传输模块、驱动模块、测距模块、视觉模块等组成，各个模块的控制核心为单片机和PC机。
The structures of virtual roundness error measuring instrument, the data acquisition circuit of single chip microcomputer and the PC data processing software were introduced.
介绍了虚拟圆度误差测量仪的构成、单片机数据采集电路及PC机数据处理软件。
Through this method, successfully develop serial communication application for large direct current motor's speed control system between PC and 89c51 single chip.
运用这种方法成功地为大型直流电机调速系统开发了PC机与89c51单片机间串行数据通信应用程序。
A new processing control mode of the laser microprocessing system is realized with the help of single chip computer, optical microscope and PC monitor software.
在单片机控制器、光学显微镜系统和PC机监控软件的配合下，本激光微加工系统实现了一种新的加工控制方式。
PC sent signal via print control port and STROBE, encoder generated choosing signal and sent it to P3.2-end of single-chip to form interrupt.
PC通过打印机控制口与STROBE发送信号，译码器产生选片信号，传给单片机P 3.2端形成中断信号。
The paper introduces an approach of serial communication of PIC16F877 single chip computers with PC and provides a hardware interface circuit and a communication source program.
介绍了PIC16F877单片机与PC机实现串行通信的一种方法，并给出了硬件接口电路及通信源程序。
The data collection system in this structural soundness monitoring system is mainly composed of two parts: single chip computer and PC.
结构健康监测系统中的数据采集系统主要由单片机和PC机两部分组成。
The configuration software is divided into PC software and Single Chip Micyoco software. The modularization design idea is adopted in this paper.
该组态软件分为PC机软件和单片机软件两个部分，这两个部分都采用模块化设计思想。
In distributed system, task of control and data acquisition is completed by single-chip microcomputer, and data processing is carried out by PC.
在分布式微机控制及数据采集系统中，控制与数据采集由单片机实现，复杂数据的处理越来越多地由PC机完成。
This paper introduces a five axis simultaneous CNC system controlled by PC and single chip computers and briefly introduces the function of the system.
本文介绍采用PC机及多个单片机联合控制的五轴联动数控系统。
The PC wireless serial interface circuit consists of single chip transmitter MICRF102, single chip receiver MICRF007 that are introduced in this paper.
介绍一种采用MICRF102单片发射器芯片、MICRF007单片接收器芯片构成的PC机无串行接口电路及程序设计。
In the experiments on the communication between intelligent measuring and control equipments, the series communication between PC and single-chip microcomputer is to a certain extent very typical.
在智能测控设备的通信实验中，PC机与单片机之间的串行通信实验最具代表性。
Using the PC, AT89C51 single chip, SJA100CAN controller, 82c250 CAN transceiver and MAX232, the design of the hardware circuit and software of the system is realized.
给出了利用PC机、AT 89 C 51单片机、SJA100CAN控制器、82c 250 CAN收发器、MAX232等实现数据采集与控制系统的硬件电路设计及软件设计。
In this paper, a method of serial communication between PC and 80c196kc Single-chip-computer applied to the test system of Greensand quality is introduced.
介绍了一种湿型砂质量测试系统中PC机和80c196 K C单片机之间串行通信的实现方法。
Therefore, this work is taken over by PC, allowing PC to withdraw the Chinese fonts from Chinese character library and sending them to the single chip computer through the com port.
因此将这个工作交给PC机，让PC机访问汉字库并提取汉字字模，再通过串口将汉字字模发送给单片机。
To finish the communication between the single chip and the computer on the base of the multi-node network control of PC.
基于PC机的多节点网络化控制，实现单片机与微机的通讯。
The single-chip commputer completes each sensor data collection and data uploaded to PC.
单片机完成各 个传感器数据的采集并将数据上传到PC 机。
A system of measuring light power and wavelength is designed and fabricated, using Silicon Color Sensor with double PN junction as detector, single chip processor as controller and PC as processor.
设计并实现了一种用硅双结色敏器件作为探测器，单片机作为控制器，PC作为处理器和显示器的光功率、波长同步测量系统。
The data acquisition is completed by single chip microcomputer, and the optimization of calibration coefficient and area calibration are made by PC computer, thus...
由单片机完成数据采集，PC机完成标定系数优化和面积的计算，从而进一步提高了测量精度。
The system circuits are based on DSP and single chip computer, and can calculate the target's position information by using received acoustic signal, and display its moving curve timely on PC.
系统硬件以DSP和单片机为核心，能够通过接收到水下目标发射的合作声信号，实时准确的解算出水下目标的方位参数，并能在PC机上显示目标的运动曲线。
This system includes PC software and single chip software.
系统软件包括下位机软件和上位机软件。
The hardware is composed of single chip computers and PC. The dialogue between thermal balance, single chip computers and PC is performed thro…
硬件采用单片机系统和微机系统相结合的形式，通过标准串行通讯接口实现天平、单片机和微机之间的对话。
This paper introduces an interfacing method of IBM-PC serially communicating with single-chip microcomputer with RS-232C.
介绍了PC机与单片机采用RS - 232c进行串行通信的接口方法。
The hardware is composed of single chip computers and PC. The dialogue between thermal balance, single chip computers …
硬件采用单片机系统和微机系统相结合的形式，通过标准串行通讯接口实现天平、单片机和微机之间的对话。
The PC is provided with a human-machine interface for controlling the whole system by controlling the single chip via the USB interface so as to finish interrelated tasks.
PC机设置人机界面，通过USB接口控制单片机从而控制整个系统，完成相关任务。
Additionally the article exploited the serial-communication system between a PC computer and 80c196 Single-chip Microprocessors so that the experiment can be done in existed condition.
此外，为了在现有条件下进行实验，还对PC机和多个单片机之间的串行通信系统进行了开发。
Here the whole system can realize serial communication of Single Chip Micyoco and machine PC, the download of programming, the display of the clock which is designed by software.
该系统还能实现单片机与PC机的串行通信和编程的下载、软件设计的时钟显示。
应用推荐