Multiple instances of Simulink block.
simulink块的多个实例。
Simulation of Autonomous Underwater Vehicles Formation Control Based on Simulink and VRML;
自主式水下航行器是由载荷和运载体组成的一个多体系统。
A system model can be established easily using aircraft synchronous generator model built by SIMULINK together with PSB.
用SIMULINK建立起同步发电机模型，并将其与PS B模块联合使用，能方便灵活地建立起发电机故障暂态模型。
By using PID control, through the iterative learning algorithm, the PID control simulation is realized by using SIMULINK.
采用PID控制，通过迭代学习算法，在SIMULINK下实现了PID控制仿真。
To reduce the wind disturbance error, the wind disturbance regular pattern is studied using a missile simulation system based on the SIMULINK.
为了减小再入段风干扰造成的误差，利用在Simulink中建立的数字打靶平台对它进行了研究。
This article is based on the establishment of high-rise building dynamic model and the Dynamic Analysis of wind-induced response though SIMULINK.
本文通过建立高层建筑的动力学模型，利用SIMULINK进行风振反应的动力学分析。
SIMULINK emulation module of Nonlinear Integrator and the nonlinear compensation emulation of its control system have been achieved adopting MATLAB language.
采用MATLAB语言，构造了非线性积分器的SIMULINK仿真模块，并作了控制系统非线性校正的仿真。
In simulation, this paper makes use of the most popular scientific software, MATLAB, and develops the corresponding simulating system with the SIMULINK in it.
在进行仿真的时候，本文采用了广泛应用的Matlab，使用Simulink功能开发了相应的仿真系统。
Using fuzzy control method in starting system establishing a simulation model in MATLAB SIMULINK and having the corresponding simulation and simulation analysis.
启动系统采用模糊控制方法，利用MATLABSIMULINK建立系统的数学仿真模型，并对仿真结果进行了分析。
From the results, we can draw a conclusion that power bond graph together with SIMULINK is a shortcut to simulate the dynamical characteristics of hydraulic system.
结果表明，功率键合图和SIMULINK相结合是对液压系统动态特性进行仿真的一条捷径。
Some faults such as amplifier offset, parameter changes, servo valve backlash and sensor fault are seeded in a virtual way by means of different switches in Simulink.
通过不同开关的动作来虚拟模拟常见的故障，诸如，放大器漂移、系统参数改变、伺服阀反冲以及传感器失灵等。
The computer language of MATLAB has many merits on simulation and analysis of control system. In this article the method of the SIMULINK model on MATLAB is introduced.
MATLAB语言在控制系统仿真与分析方面具有众多优点，文章具体分析了基于MATLAB语言的SIMULINK模型的仿真求解方法。
The potential distribution and gradient distribution of the dry - type transformer with subsection and layer winding applied transient voltage are simulated by SIMULINK.
采用SIMULINK软件仿真出了分段层式干式变压器线圈在暂态电压作用下的电位分布和梯度分布。
With the help of those established mathematical models, software SIMULINK simulates the dynamic performance of the system in displacement, speed and pressure regulation.
并根据系统的数学模型对铸浆机系统的位移、速度、压力运用SIMULINK进行动态仿真。
Controller was designed in MATLAB fuzzy logic toolbox, and fuzzy controller and taxiing model were used in SIMULINK condition, and the whole simulation model was set up.
在MATLAB模糊逻辑工具箱中对控制器进行设计，并将模糊控制器与滑跑模型应用于SIMULINK仿真环境，建立整体仿真模型。
Based on SIMULINK, the digitized processing model of signals of LFM pulse compression radars is established, and the specific process of module construction is also given.
基于SIMULINK，建立了LF M脉冲压缩雷达信号数字处理模型，并给出具体的模块搭建过程。
This paper shows that it is possible to model and simul ate any CIM vector controlled system used for agricultural pump or fan by means of advanced MATLAB and SIMULINK platform.
使用当前先进的MATLAB语言及SIMULINK环境，对农村中大量使用的拖动风机与水泵类负载运行的笼型感应电动机（CIM）矢量控制系统，进行了建模和仿真。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
The paper builds an integrated simulation model including respective subsystems for three phase shunt power active harmonic compensation system based on SIMULINK function of MATLAB.
本文在基于MATLAB的SIMULINK为三相并联型电力有源谐波补偿系统建立了一个包括各个子系统在内的整体仿真模型。
In this paper SIMULINK, a dynamic simulation tool in MATLAB software, is used to establish the simulation model of the asynchronous motor starting process, and simulation results...
利用MATLAB软件中的动态仿真工具SIMULINK建立了异步电动机起动过程的仿真模型，仿真结果验证了判据的正确性。
The simulation model of induction motor is derived in MT axis, the simulation model of voltage source SPWM inverter is derived too, Both of their realization are presented by SIMULINK.
根据MT坐标系下交流电机的数学模型推导出它的仿真模型，同时得出SPWM逆变器的仿真模型，并在SIMULINK中实现。
A dynamic analysis method using simulation technology for intermittent rotary sheet transfer mechanism was put forward. The process of mechanics simulation based on SIMULINK was introduced.
提出了运用仿真技术对间歇旋转式造纸机构进行动力学分析的方法，介绍了在SIMULINK下的机构仿真过程。
The process of Rapid Prototyping of control system, implementing method of real- time control and key technique based on MATLAB/SIMULINK/RTW are described in detailed with concrete example.
结合具体实例详细介绍了基于MATLAB/SIMULINK/RTW的控制系统的快速成型过程和实时控制的实施方法及关键技术。
A mathematical model was set up for the ETB system. Based on it, an improved PID control algorithm and a varying sliding mode control algorithm were proposed and verified in MATLAB/SIMULINK.
建立了电子节气门体的数学模型，并以此被控对象在MATLAB/SIMULINK中设计并验证了改进型PID与变滑模控制器算法。
According to the principle of material balance in well bores the method of dynamic simulation to describe the changing rules of submergence depth is established in the paper based on SIMULINK.
在现有研究基础上，根据井筒内物质平衡原理，建立了基于SIMULINK下沉没度变化规律的动态仿真方法。
In this paper, SIMULINK simulation model of gain self-regulative neuron two-degree-of-freedom PID control is established, which is based on S-function. Also the simulation results are presented.
该文通过编写S函数的方法建立增益自调整的神经元二自由度pid控制的SIMULINK仿真模型，并给出仿真结果。
In this paper, SIMULINK simulation model of gain self-regulative neuron two-degree-of-freedom PID control is established, which is based on S-function. Also the simulation results are presented.
该文通过编写S函数的方法建立增益自调整的神经元二自由度pid控制的SIMULINK仿真模型，并给出仿真结果。
应用推荐