According to the requirement of practice production, the precision part feeding system design and part mechanics behavior simulation is researched systematically.
本文结合实际生产的要求，系统研究并分别实现了精密零件送料系统的设计和零件力学行为仿真。
The output harmonic feature of the multi-modular converters with STS-SVM is researched and analyzed through simulation and experiment, compared with the conventional SVM and CPS-SPWM.
通过仿真和实验，研究了STS - SVM组合变流器的输出频谱特性，并与常规s VM技术和载波相移spwm技术进行了比较分析。
In the study of modern control theories, pole assignment and LQR are designed on inverted pendulum systems, and the MATLAB simulation is researched.
利用息现代控制理论，针对倒立摆系统研究了极点配置方法和线性二次型最优控制方法，并利用MATLAB进行了仿真研究。
The process parameters and mould structure for precision alternator pole forging are researched through FEM simulation.
通过有限元模拟对磁极精密模锻工艺参数和模具结构进行了研究。
With the simulation experiments, the effect of the sample delay to the adaptive equalization performances will be researched. The results show that the effect is obvious.
然后结合仿真实验分析研究系统采样延迟对调制自适应均衡性能的影响，实验结果表明其影响作用明显，不可忽略。
Effect of reversal time on energy consumption for the regenerative soaking pits is researched by numerical simulation and experimental research.
通过数值模拟和实验方法，重点研究了换向时间对蓄热式均热炉能耗的影响。
The method of simulation analysis was researched to support product intelligent redesign, which include simulation modeling, redesign propose intelligentized generation and its implementation.
研究支持产品智能再设计的仿真分析方法，包括仿真建模、再设计建议的智能化生成及其实现。
Two main aspects in VLSI testing, fault simulation and test generation, are researched in this dissertation.
本文对VLSI测试中的两个主要问题—故障模拟和测试产生进行了深入的分析和研究。
In this paper, the applications of cascade STS-SVM multilevel converters on active power filter and ac motor vector-controlled transducer are researched through simulation.
本文通过仿真研究了级联型STS - SVM多电平变流器在电力有源滤波器和交流电机矢量控制变频调速系统中的应用问题。
And therefore the order picking system, which is the core system of storage logistics, is researched and the rational operational system choosing method is decided based on simulation.
本文就是以仓储物流系统中核心的拣货系统为研究对象，借助仿真方法，提出选择拣货作业各主要影响因素运行策略的方法。
Phase equilibria properties of alternative refrigerant have been researched by using the method of molecular dynamic simulation.
本文利用分子动力学模拟算法研究制冷剂替代物的气液相平衡性质。
Molten steel flow field in tundish nozzle and influence of some factors on deposition rate were researched by method of numerical simulation.
采用数值模拟方法，对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。
Finally, according to simulation results to be researched on above-mentioned, self-adjusting factor fuzzy-controller as the centre of the control system is put forward.
最后，经过对上述仿真结果研究，提出了自调整因子模糊控制器作为控制系统核心。
Finally, aiming to the simulation result type of groundwater flow, the visualization expressing fashion about groundwater flow simulation result is researched.
针对地下水流模拟结果类型，研究地下水流模拟结果可视化表达的方式。
Internal performance of unsteady flow of counterflow thrust vectoring nozzle has researched base on numerical simulation.
基于数值模拟方法，研究了逆流矢量喷管非定常内流性能。
The architectures of data logging and replay in HLA-based simulation system were analyzed. The scope and methods of simulation data logging during federation execution were researched.
分析了基于HLA的仿真系统中记录与回放结构，研究了联邦执行时仿真数据的记录范围和方法。
The deep drawing process of AZ31 magnesium alloy rectangular parts was researched by numerical simulation and experiments.
采用数值模拟和实验相结合的方法研究了AZ31镁合金板料分块压边力拉深矩形件的过程。
Overseas, devices disabled mechanism is already researched from qualitative analysis to quantitative modeling and computer-aided simulation.
在国外，失效机理的研究已从定性分析转向定量建模和计算机模拟。
In this paper, the aberration theory of electron image forming systems in the combined focusing and deflecting field has been researched using the technology of numerical simulation.
本文利用数值仿真技术对复合场中电子成像系统的像差理论做了研究。
The knowledge inquiry prototype system for the plant community growth simulation provides foundations to the plant community growth simulation that will be researched in the furture.
面向植物群落生长模拟的知识建模研究，为后续的植物群落生长仿真工作奠定基础。
The relativity of the seismic attributes with reservoir characters was researched by utilizing synthetic seismic profile generated with simulation method based on the Markov Chain theory.
利用基于马尔科夫链理论的正演模拟方法生成的合成地震剖面，通过众多地震属性的提取，分析研究了地震属性与地质剖面中所包含的储层特征的相关性。
PID, pole assignment and linear-quadratic optimal control (LQR) are used to design inverted pendulum systems. And they are researched by MATLAB simulation.
针对倒立摆系统研究了PID、极点配置和线性二次型调节器，并利用MATLAB进行了仿真研究。
The optimization process condition is researched by the method of simulation, and bring up the usage scope of this method.
并用模拟法进行了部分氧化工艺优化条件的研究，提出了这一方法的使用范围。
Considering the material parameters and the load changeability, the reliability of intensity and stability for the concrete gravity dam is researched with the method of Monte Carlo simulation.
应用蒙特卡罗模拟方法，考虑材料参数和荷载的变异性，对混凝土重力坝强度和稳定性的可靠性分别进行了研究。
Based on historical data of Shaanxi natural gas network system, static and dynamic simulation and load forecasting of natural gas system has been researched in this thesis.
本文依据陕西省天然气管网系统的历史数据，对天然气管网系统稳动态仿真和天然气短期负荷预测进行了研究。
The generation of the failure time was researched based on replacement maintenance and minimal maintenance, and then the simulation algorithm was designed.
算法中对更换维修及最小维修下的随机故障时间的产生进行了研究。
The dynamic change course under the given laser parameters and the distribution of the temperature field are researched, and the simulation results are perfect.
研究了给定激光技术参数条件下的温度场的动态变化过程以及温度场的分布，数值模拟令人满意。
In this thesis, the finite element simulation technology of automobile panel stamping forming is researched, and an automobile front fender stamping forming is simulated.
本文对汽车覆盖件冲压成形有限元数值仿真技术进行了研究，并对某型轿车前翼子板进行了冲压成形仿真。
Finally, STBC is applied to MIMO-OFDM systems, and the simulation model is built. The performance in multiple simulation condition is researched.
最后，将空时分组码应用于MIMO - OFDM系统中，建立了STBC - OFDM的仿真模型，研究了在多种仿真条件下MIMO - OFDM系统的性能。
Finally, STBC is applied to MIMO-OFDM systems, and the simulation model is built. The performance in multiple simulation condition is researched.
最后，将空时分组码应用于MIMO - OFDM系统中，建立了STBC - OFDM的仿真模型，研究了在多种仿真条件下MIMO - OFDM系统的性能。
应用推荐