The physical model and mathematical model of fuel pump were created in the performance simulation mould. Factors affected performance and the simulation output are analyzed and discussed.
在性能仿真模块中建立了油泵产品的物理模型和数学模型，并对仿真结果及影响油泵产品性能的因素进行了分析。
Taking an urban expressway as an application case, the simulation process of the road corridor is introduced first, including data input, simulation parameters, and simulation output result.
以一条城市快速干道为例，首先介绍了道路沿线的现状仿真分析过程，包括数据的输入、仿真参数的设置、仿真结果的输出等内容。
The dynamic analysis is done on the output from the simulation process based on the output logs or the events.
动态的分析是由基于输出日志或事件的模拟流程的输出过程来完成的。
Listing 4 shows a sample output of the trace that validates the simulation.
列表4展示了跟踪输出的样例，使模拟生效。
When running an interactive simulation, human tasks with forms defined for their output are displayed to the user for input, much as in storyboarding mode.
在运行交互式模拟时，对于带表单(定义用于显示任务的输出)的人工任务，将向用户显示该表单以获得输入，这与在故事板演示模式中非常类似。
On the basis of output of flight imitate system, the driving signal of flight simulation is formed by coordinates transforming, scale limiting, signal washout and filter.
根据飞行仿真模块的输出，通过坐标变换、比例限制、信号洗出和滤波等，形成运动平台的驱动信号。
The output harmonic feature of the multi-modular converters with STS-SVM is researched and analyzed through simulation and experiment, compared with the conventional SVM and CPS-SPWM.
通过仿真和实验，研究了STS - SVM组合变流器的输出频谱特性，并与常规s VM技术和载波相移spwm技术进行了比较分析。
The default behavior is to perform an AND on the two output criteria. In order to make the simulation work, you need to do the following.
缺省行为是对两个输出条件执行AND操作。
Control parameter gotten by dynamic neural network is used to control the model's output in simulation. The result concludes that the controller can get better control result.
在仿真试验中用动态神经网络所得到的控制算法对模型的输出进行跟踪控制，从仿真结果图可以看出这种控制器能获得较好的控制效果。
Computer simulation experiment, as well as theoretical research show that the amplitude mean square error of the iterative output derived from IAFC is 0.69%, and the amplitude un-uniformity is 1.01%.
理论计算和计算机模拟实验结果显示，模糊控制迭代算法的迭代结果其振幅均方误差为0.69%，振幅不均匀度为1.01%。
Simulation results implied that output dynamic response performance of secondary element improved greatly by adopting fuzzy auto-tuning PID control, the results attained expect aim .
仿真结果表明采用模糊PID自整定控制后使得二次元件输出动态响应性能大大改善，达到了预期的目标。
Only by computer simulation, can the request of high quality and high output for the polymer process be satisfied.
只有通过相关的计算机模拟，才能满足聚合物加工高质量和高产量的要求。
Simulation and experimental results show that the proposed converter has sine wave input current and output voltage, low harmonic content, adjustable power factor, and zero voltage commutation.
仿真和实验结果表明：所提出的变换器输入电流和输出电压为正弦，谐波小且输入功率因数可控，并可实现零电压换流。
Graphics Simulation technology in NC machining is a powerful tool for validating NC machining programming, which using the computer graphical output to simulate the real machining process.
数控加工图形仿真技术利用计算机图形显示来模拟实际加工过程，是验证数控加工程序正确性的有力工具之一。
Tested by PSPICE simulation and small power experiment, the designing project "adjusting output voltage by changing on and off time of the SPWM" is practical.
经PSPICE软件仿真和小功率电路实验证明，“通过改变开关角而实现调节输出电压”的闭环设计方案是可行的。
The simulation and experimental results illustrate advantages of the inverter:fixed switching frequency, high output-voltage performance, and strong nonlinear load adaptability, etc.
仿真和实验结果证实了该逆变器具有开关频率固定，输出电压波形质量好，非线性负载适应能力强等优点。
The designed signal simulation circuit can precisely simulate the output signal waveform of fiber-optic gyro, offer accurate input signal to counter card.
设计的信号模拟电路精确模拟了光纤陀螺输出信号的波形，给计数卡提供了准确的输入测试信号。
The paper applies the fuzzy control system toolbox based on MATLAB (SIMULINK) language, through the application of the electrical generator output voltage fuzzy control, supplies a simulation method.
运用了基于MATLAB (SIMULINK)语言的模糊控制系统工具箱，通过对发电机输出电压模糊控制的实现提供一种仿真方法。
The simulation results show the open-loop and closed-loop frequency responses, output saturation, and the slew-rate of operational amplifier are truly reflected by this model.
仿真结果显示，运放开环与闭环时的频率响应、输出饱和、转换速率等特性得到了真实的反映。
This paper presents the simulation method and the circuit design of output signal for counting type fiber-optic gyro, and the realization circuit and software programming method of counter card.
本文研究了计数式光纤陀螺输出信号模拟的方法、电路设计及计数卡的具体实现电路和软件编程方法。
The output direct feedback controller design and simulation results of a nonlinear mass-spring-damper mechanical system show that these methods are effective.
通过对一个非线性质量块-弹簧-阻尼器系统输出反馈控制器的设计和计算机仿真，验证了方法的有效性。
The structure and the operation mechanism for the input-buffered Ethernet switch with input and output virtual queues is analyzed. The model is simulated and evaluated by computer simulation.
分析了采用输入、输出虚队列的输入缓存式以太网交换机的运行机制，并用计算机仿真的方法对其进行模拟、评价。
In whole chip simulation, all possible application situations, such as shorted output and under voltage, are well simulated and verified.
在整体电路仿真时，考虑了芯片各种可能的应用环境(如输出短路，电源突降等情况)，逐一进行功能验证。
We can believe in that the new concept will be beneficial for the study on the output sequence of queuing system, and queuing simulation sequence as well.
可以期望，广义谱概念的建立，将十分有助于对排队系统输出序列、排队仿真序列以及所有离散系统随机仿真序列特征与规律的揭示。
It integrates the optimization technology into simulation process, improves the output continually in the simulation environment and achieves the optimization of system performance finally.
将优化技术嵌入到仿真过程中，在仿真环境下使输出响应不断地得到改进，从而实现道路交通系统性能的优化。
Result: The software play full function of simulation with sequence of setting parameter, generating dada documents, simulation of progress and output results.
软件以参数设置、数据文件生成、过程模拟、结果分析和显示输出模块按流程走向相互联系，完成仿真的总体功能。
Theory analysis and simulation show it's output performance is better than traditional SVPWM, when the output frequency is not high, switch frequency is very high and dead zone is considered.
理论分析和仿真结果表明，在输出频率不是很高，开关频率非常高，且考虑到死区的影响时，基于新型空间矢量选择模式的逆变器具有比传统SVPWM更好的输出特性。
The results of simulation show that the output power and energy conversion efficiency of the said chimney increase along with increasing the area of heat-collecting shed and the height of the chimney.
数值模拟结果表明，太阳能烟囱的输出功率及能量转换效率随集热棚面积和烟囱高度的增加而增加。
The results of simulation show that the output power and energy conversion efficiency of the said chimney increase along with increasing the area of heat-collecting shed and the height of the chimney.
数值模拟结果表明，太阳能烟囱的输出功率及能量转换效率随集热棚面积和烟囱高度的增加而增加。
应用推荐