The theoretical analysis and numerical simulation of temperature distribution in electromagnetic casting procedure.
对电磁铸造过程温度场进行了理论推导及数值分析。
Numerical simulation of temperature field during al solidification process under static high pressure has been conducted.
采用数值模拟的方法，研究了纯铝在静高压作用下凝固过程温度场的变化情况。
Also, digital simulation of temperature field and temperature gradient of tissue is performed, which is coincided with experiment.
对冷冻过程中机体组织内部的温度场和温度梯度进行了数值模拟，与实验结果吻合较好。
The application of FEM to simulation of temperature field in the tundish and description of temperature distribution in the tundish was presented.
通过建立中间包温度场的有限元模型，分析了有限元法在模拟中间包温度场方面的应用。
The numerical simulation of temperature field and shrinkage defect prediction for a valve casting, which was involved in 4 kinds of casting proces.
对采用4种不同铸造工艺方案的阀体铸件凝固过程进行了数值模拟及缺陷预测，获得了与试验相一致的模拟结果。
Based on symmetry of the circular light spot of the laser, a two dimensional numerical simulation of temperature fields of laser molten pool has been developed.
利用激光圆形光斑对称性的特点，建立了激光表面快速熔凝条件下温度场的二维数值模型。
This paper mainly does research for the numerical simulation of temperature distribution of barrel of injection molding machine in electromagnetic induction heating.
本文主要研究电磁感应加热器加热注射机料筒时料筒温度分布的数值模拟。
GLLVHT model was applied to the simulation of temperature distribution of cooled water discharge of Jiangsu LNG project for the prediction of environmental influences.
采用GLLVHT模型对江苏LNG项目冷海水排放温度场进行模拟计算，预测其环境影响。
In this paper, the optimum designing method for dimension of ingot mould based on numerical simulation of temperature and thermal stress field in a cycle of use is proposed.
本文提出以钢锭模一个使用周期的温度场和应力场的数值模拟结果为依据优化设计钢锭模的方法。
In order to realize the dynamic simulation of temperature filed, gauss heat source model was adopted, and APDL language was used to compile program to apply moving heat source load.
建立高斯热源模型，并通过APDL语言编写程序实现热源的移动加载，对焊接温度场进行动态模拟。
Abstract: CFD Software can be applied in the accurate simulation of temperature field of electronic equipment or combination, it is useful in the thermal design of electronic equipment.
摘要：CFD软件可以较为准确地仿真模拟电子设备或其组合体的温度场，因而可以应用于电子设备的热设计。
According to a construction case of substation in Suzhou, 3D numerical simulation of temperature and stress fields of massive concrete during the construction and operation stages is performed.
结合苏州轨道交通地下车站工程实例，对大体积混凝土施工期和运行期温度场和应力场进行仿真计算。
A visualization study on the computer simulation of low temperature grain drying is carried out.
运用计算机图形技术进行了低温谷物干燥计算机模拟的可视化研究。
The product yields at various temperature gradients of simulation, and the characteristics of gas and liquid components, and their changing patterns were systematically analysed and studied.
本文是根据试验结果对各模拟温阶的产物的产量及组份特征和变化规律进行了系统的分析和研究。
The experiment results indicate that the design and experiment scheme of the temperature simulation system is feasible.
试验结果表明温度模拟系统的设计和试验方案是可行的。
The first simulation show the good construction of the water, and the temperature field is accordant with the result of real measure.
“湘潭电厂取排水口温度场模拟”显示了良好的水体三维流动结构，并与实测水温分布吻合良好。
The distribution of velocity and temperature of the smoke flow in the fire tunnel was calculated by the simulation.
通过模拟计算得出了发火巷道内烟气流动的速度场、温度场详细分布情况。
The effect of cooling rate and undercooling temperature on the rate and amount of dehydrogenation was studied by magnetic balance simulation method.
用磁秤模拟方法研究了冷却速度和过冷温度对镍铬钢排氢速度和排氢量的影响。
The design of programming part related to the mode of intelligent control system can realize the precision control to multi-points temperature by simulation analysis in computer.
第二部分软件设计，按智能控制系统的模式，实现计算机对多区温度的精确控制。
The use of welding simulation different temperature on the welding HAZ toughness variation has been studied.
采用焊接热模拟方法研究了不同温度退火时热影响区韧性的变化。
The correctness of the models and simulation had been verified indirectly by testing the temperature inward-outward superficial coat of the bearing race snap.
通过对感应加热过程中轴承内环内外表层温度的测试，间接证明了所建模型和计算机仿真的正确性。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize processing design.
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
By the test of numeric simulation, under various exit velocities the changed rules of stress, temperature and land size about the die are analyzed in this paper.
本文利用数值模拟实验，分析了不同出口速度下的模具应力、模具温度和模具工作带尺寸的变化规律。
Using the developed numerical simulation software of temperature field, the solidification process of wear resisting cast ball in metal mold was numerically simulated.
利用温度场数值模拟软件对金属型耐磨铸球的凝固过程进行了数值计算。
The model establishment and numerical simulation of SAR and the instantaneous temperature distribution for no-wound tumor rf thermotherapy are performed in this paper.
本文针对非侵入性射频热疗的SAR场及瞬态温度分布进行建模和数值模拟计算。
Numerical simulation of flow and temperature field in the test tube of Model Loop Wax Deposition Apparatus was performed.
对模型环道蜡沉积装置测试段流场温度场进行了数值模拟。
The variation of perfusion with temperature and the lower perfusion in tumor tissue are fully considered in the simulation of unsteady-state temperature profiles.
在非稳态温度场模拟中考虑了血液灌流量随温度变化和肿瘤区低血液灌流的特点。
From the point of view of simulation, the gasification temperature of coke seems to be better than the reaction index of coke.
从模拟高炉的近似程度看，焦炭的气化温度优于其反应性。
The aim of this paper is to build the steady state simulation platform of the low temperature styrene/butadiene emulsion polymerization unit.
本文的目的是建立起低温乳聚丁苯橡胶聚合单元的稳态模拟平台，并在此基础上对生产装置进行优化计算。
When the heat lost of the whole (simulation) system increase by 0.5%, the average temperature would decrease about 5 K.
整个循环体系的热损失每增加0.5%，锁斗内的平均温度将下降5K左右。
应用推荐