The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and opti...
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize process…
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize processing design.
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
Numerical simulation of flow field shows the new furnace has the advantages of reasonable flow organization, homogeneous temperature profile and m...
对炉内流场的数值模拟证明了该新型还原炉在流场组织、温度场均匀性以及强化金属镁的还原过程等方面具有明显的优势。
The parallel computation method was used for numerical simulation of flow field with moving boundary, and unstructured moving grids were generated by spring analogy method.
将并行计算方法应用于含运动边界流场的数值模拟，采用弹簧方法生成非结构运动网格。
The temperature field of coolant is obtained through the CFD simulation of flow field to reduce the errors arising from boundary conditions given by simple empirical formulas.
通过对冷却水侧流场的CFD模拟获得缸体冷却水侧温度场的分布，减少了采用简单经验公式给出边界条件造成的误差；
Thirdly, a 3D computation model of the mid-span section deck was established, the similarity and difference between 2D and 3D numerical simulation of flow field are compared also.
建立跨中截面三维计算模型，比较三维与二维流场数值模拟的异同。
Through numerical simulation, the characteristics of goaf flow field and gas transportation under J-shape and U-shape ventilation systems were analyzed.
通过数值模拟，对比分析了J型通风和u型通风条件下的采空区流场及瓦斯运移特征。
The revised model based on flow units was further validated by cross-sectional reservoir simulation models in selected areas of the field.
在选择区域范围内根据油藏横截面模拟模型能进一步确认流动单位校正模型。
Numerical simulation of the flow field around the oscillating ideal flat plate is presented to assess the aerodynamic derivatives.
提出了一种数值模拟振动的理想平板绕流场，并提取其气动导数的方法。
The influence of liquid distributed ring (LDR) on flow field in spray scrubber of Nanjing Institute of Technology project has been analyzed by means of numerical simulation.
通过对南京工程学院湿法烟气脱硫系统喷淋塔的数值模拟，分析了液体分布环(ldr)对塔内烟气流场的影响。
Presents the demands for indoor environment of the injection workshop, air conditioning design and energy saving design. Analyses the flow field with the method of CFD numerical simulation.
介绍了该输液车间室内环境要求、空调工程设计及空调系统的节能情况，利用CFD数值模拟方法对流场进行了预测分析。
The accuracy of the simulation model is verified by inlet duct steady flowing pressure tests on test benches, and then flow field distribution in inlet ducts is analyzed.
在用气道稳流试验台验证了仿真模型的准确性后，分析了进气道内部的流场分布。
The influence of bit cutting teeth and its jet nozzle on the flow field is taken into account in the simulation.
模拟中考虑了钻头的切削齿和射流喷嘴对流场的影响。
With respect to the numerical simulation of the flow field of a novel Venturi air register incorporating an inlet swirler proposed is an analytical model along with a processing method.
针对带入口旋流器的新型文丘利调风器流场的数值模拟，提出了一种分析模型和处理方法。
Numerical simulation of flow and temperature field in the test tube of Model Loop Wax Deposition Apparatus was performed.
对模型环道蜡沉积装置测试段流场温度场进行了数值模拟。
This paper aims at the study of 3D numerical simulation of the groundwater flow field of the Changzhou-Wujin district, for revealing the main cause of the depression of the ground surface.
通过研究常州-武进地区地下水流场的3维数值模拟，揭示了该地区产生地面沉降的主要成因。
Analysis of numerical simulation is used on flow field and temperature field in mechanical seal cavity.
对机械密封腔内流场和温度场进行了数值模拟。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
The comprehension of MHD control of flow field is grown on further from another angle by numerical simulation of Hartmann flow.
通过对哈特曼流动的数值模拟，从另一个角度进一步加深了对MHD控制流场的理解。
The numerical simulation for the three dimensional turbulent flow field of multiply jets mixing with a confined crossflow in cylindrical duct is presented in this paper.
对多股射流与圆柱管中的横流湍流混合的三维流场进行了数值模拟。
At last, the feasibility of the numerical simulation computing about this model is analyzed simply through investigating if the flow-field equations in this model are closed.
最后，通过对该理论模型中流场方程的封闭性研究，简单分析了进行数值模拟计算的可行性。
The in furnace flow field characteristics of a large sized boiler were studied by way of experimental measurements and numerical simulation.
通过实验测量和数值模拟研究了大容量锅炉的炉内流场特性。
On the basis of flow field simulation, the effect of different types of nozzle structure on the flow patterns are calculated and examined with water model experiments.
在此基础上模拟计算了几种不同形式的水口对流动形态的影响，并用水力模型试验进行了验证。
Simulation of turbulence atomization jet in the air-water two phase flow field was performed.
对水在空气中湍动雾化射流的气液两相流场进行了数值模拟。
Finally measurement of the flow field in the rotating disk with a five-hole probe is demonstrated feasible by the numerical simulation.
最后，通过数值模拟预测了在该旋转盘试验中是可以用五孔探针对流场进行测量的。
Molten steel flow field in tundish nozzle and influence of some factors on deposition rate were researched by method of numerical simulation.
采用数值模拟方法，对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。
There is a difference between the numerical simulation results of two-dimensional and three-dimensional flow field in supersonic inlet, which shows the influence of boundary layer on the side wall.
超声速进气道的三维流场数值模拟结果与二维数值模拟结果存在较明显的差别，说明进气道侧壁附面层的影响不容忽略；
Obtained numerical simulation results of three types of pulverization chamber flow field consisting of the gas phase and discrete phase.
对三种不同结构雾化室流场进行数值模拟，获得了包括气相和离散相在内的流动特性计算结果。
This method can describe the water flow velocity and vortex function distribution on all points of the reactor, with the simulation result in good coincidence with field test data.
该方法能够描绘出反应器内各点的水流速度以及涡流函数分布，且模拟结果与试验测定结果吻合得较好。
应用推荐