Simulation results demonstrate that the control performance, stability, and adaptation of the intelligent controller are better than those of the conventional PID controller.
仿真结果表明：与传统PID控制器相比，该智能控制器的控制性能具有优越性。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
On the basis of modeling, simulation and field test, proposed are the PID parameter setting range of the governor under the large grid operating condition, and the power control mode of the unit.
通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。
Simulation results implied that output dynamic response performance of secondary element improved greatly by adopting fuzzy auto-tuning PID control, the results attained expect aim .
仿真结果表明采用模糊PID自整定控制后使得二次元件输出动态响应性能大大改善，达到了预期的目标。
After the success in decoupling, single neural cell self-adapting PID is adopted to control nonlinear object. The simulation results show that the control strategy gets better effects.
当解耦器训练结束后，对于非线性对象采用单神经元自适应PID来进行控制，仿真结果表明，此控制方案效果较好。
Based on this, Fuzzy PID Controller applied to jigger discharging system is designed with simulation by MATLAB, analysis in detail to the control effect is processed.
在此基础上设计了适用于跳汰机排料系统的模糊pid控制器，利用MATLAB进行仿真，对控制效果进行了详细的分析。
According to the different requirement of simulation modeling, introduces the control algorithm of PID controller and some assistant functions.
根据仿真建模的不同需要，介绍了PID调节器的控制算法及一些辅助功能。
Based on this, Fuzzy PID Controller applied to single room jigger servo system is designed with simulation by MATLAB, analysis in detail to the control effect is processed.
在此基础上设计了适用于单室跳汰伺服系统的模糊P功控制器，利用MATLAB进行仿真，并对控制效果进行了详细的分析。
The simulation and motor control show that the new algorithm has fast learning rate, good convergence properties and can overcome the defects of traditional PID algorithm.
仿真实验及在伺服电机转速控制中的应用表明，该算法具有较快的学习速度及良好的收敛性能，并有效地克服了传统PID算法的缺陷。
According to the result of simulation, we can find the fuzzy PID algorithm has improved the control effectiveness and dynamic and static performance of system significantly.
从仿真结果来看，模糊pid自整定算法极大的改善了系统的控制性能，使被控对象有更好的动、静态性能。
Through simulation verification and comparison with conventional cascade PID control system, the results show the self-adaptive PSD control system has better control effectiveness.
通过仿真验证并与常规串级PID控制系统进行比较，表明自适应PS D控制系统具有更好的控制效果。
The results of simulation show that fuzzy self-tuning PID controller is better than regular PID controller, the dynamic and static properties of the control system are improved.
仿真结果表明，模糊自整定PID控制器比常规pid控制器有更好的控制效果，大大改善了系统的动态和静态性能。
A new fuzzy PID control algorithm based on PID engineering state methods is proposed in this paper. Experimented and simulation results show that the algorithm proposed has good performances.
提出一种基于工程状态的自适应模糊pid控制算法，仿真和实验表明，具有简单、控制品质优良等特点。
Computer simulation results show that the fuzzy PID gain setting control method is superior to current PID control, and greatly improves the dynamic capability and stabilization capability.
通过计算机仿真结果表明，这种模糊增益调整PID控制器比常规pid控制器有更好的控制效果，大大改善了系统的动态和稳态性能。
This paper presents PID controller using QFT and makes simulation of numerical value fabric system of two dimensional control, proves validity of controller.
本文中介绍了利用定量反馈理论设计的PID控制器，并对两自由度控制结构系统进行了数值仿真，验证了控制器的有效性。
In this dissertation, theoretical and numerical simulation studies have been conducted about structure vibration control with MR dampers, wire rope isolators and neural network PID control strategy.
本文利用神经网络PID控制算法，对使用磁流变阻尼器和钢丝绳减振器的舰用智能减振抗冲元件进行了理论和仿真研究。
Simulation show that this control method can improve the system's dynamical performance and its static accuracy in comparison with the traditional PID control.
仿真结果表明，该控制方法比传统PID控制更好的改善了系统的动态性能，提高了稳态精度。
A cost function is used as the criterion of performance evaluation and simulation is made to analyze the effect of all sorts of network delays on the PID control performance.
使用一种代价函数作为性能评估标准，并通过仿真实验分析了各种网络延时对PID控制性能的影响。
The system uses electro-hydraulic moment servo control system to simulate wave torque and PID algorithm to control. The result of simulation is up to the requirement.
本系统用电液力矩伺服控制系统来模拟海浪力矩，采用PID算法进行控制，其仿真结果符合要求。
By using PID control, through the iterative learning algorithm, the PID control simulation is realized by using SIMULINK.
采用PID控制，通过迭代学习算法，在SIMULINK下实现了PID控制仿真。
Combining regular PID control methods, the main-auxiliary feedback self-organizing fuzzy PID controller was designed and the simulation verifies its advantage and stability.
结合常规PID控制方法，构建了主、副回路的自整定PID模糊控制器并对其有效性和稳定性进行了数字仿真。
The computer simulation results indicate that the fuzzy PID control system is more robust than the comparable linear PID control system in control of the tissue temperature.
计算机仿真结果表明模糊控制系统在组织温度控制中比对应的线性PID控制系统鲁棒。
The computer simulation technology, which applied to optimize control of PID control system, is a good example that control system was reformed with information technology.
把计算机数字仿真技术运用于生产过程的PID控制系统中，实现对控制系统的最优化控制，是信息技术应用于控制系统的一个范例。
The research of simulation and the application in the lab manifests that the characteristic of fuzzy PID controller is better than the normal one, it can improve efficiently control effect.
仿真研究和在实验室的实际应用表明，模糊pid控制器特性比常规pid控制器更优良，能有效地改善控制效果。
The results of computer simulation show that the maximum overshoot is small-er and the settling time required is shorter as compared with single PID control.
通过计算机进行灰色预测控制仿真，显示超调量小，调节时间短，控制效果优于单一pid控制。
Traditional DC timing system is based on complex PID simulation control system which is composed of schism components, so it has deficiency on reliability, flexibility and control ability.
但传统的直流调速系统所采用的是由分立元件构成的复杂PID模拟控制系统，在可靠性和灵活性以及控制性能都存在不足。
The result of simulation shows that comparing this controller with conventional PID controller the control performance of the system has been enhanced greatly.
仿真结果表明，基于积分分离PID控制算法的神经元控制器与传统的神经元PID控制器相比，系统的控制性能得到了较大的改善。
And the electromechanical simulation of coarse and fine tracking aiming system is done respectively which take the PID as algorithm for control, and MATLAB as tool for simulation.
引入PID控制算法，运用了MATLAB作为仿真工具，分别完成了粗精跟踪瞄准系统的机电动力学仿真。
Finally, through MATLAB simulation demonstrates and verifies the control performance of the proposed self-tuning control in comparison with the traditionally designed PID control.
最后，运用MATLAB仿真软件对广义最小方差自校正控制算法进行仿真，并与传统控制规律(常规pid控制)的仿真结果进行比较分析。
Finally, through MATLAB simulation demonstrates and verifies the control performance of the proposed self-tuning control in comparison with the traditionally designed PID control.
最后，运用MATLAB仿真软件对广义最小方差自校正控制算法进行仿真，并与传统控制规律(常规pid控制)的仿真结果进行比较分析。
应用推荐