On the basis of modeling, simulation and field test, proposed are the PID parameter setting range of the governor under the large grid operating condition, and the power control mode of the unit.
通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。
Simulation results demonstrate that the control performance, stability, and adaptation of the intelligent controller are better than those of the conventional PID controller.
仿真结果表明：与传统PID控制器相比，该智能控制器的控制性能具有优越性。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
According to the different requirement of simulation modeling, introduces the control algorithm of PID controller and some assistant functions.
根据仿真建模的不同需要，介绍了PID调节器的控制算法及一些辅助功能。
Simulation results implied that output dynamic response performance of secondary element improved greatly by adopting fuzzy auto-tuning PID control, the results attained expect aim .
仿真结果表明采用模糊PID自整定控制后使得二次元件输出动态响应性能大大改善，达到了预期的目标。
The simulation and motor control show that the new algorithm has fast learning rate, good convergence properties and can overcome the defects of traditional PID algorithm.
仿真实验及在伺服电机转速控制中的应用表明，该算法具有较快的学习速度及良好的收敛性能，并有效地克服了传统PID算法的缺陷。
The results of simulation show that fuzzy self-tuning PID controller is better than regular PID controller, the dynamic and static properties of the control system are improved.
仿真结果表明，模糊自整定PID控制器比常规pid控制器有更好的控制效果，大大改善了系统的动态和静态性能。
The computer simulation technology, which applied to optimize control of PID control system, is a good example that control system was reformed with information technology.
把计算机数字仿真技术运用于生产过程的PID控制系统中，实现对控制系统的最优化控制，是信息技术应用于控制系统的一个范例。
The result of simulation shows that comparing this controller with conventional PID controller the control performance of the system has been enhanced greatly.
仿真结果表明，基于积分分离PID控制算法的神经元控制器与传统的神经元PID控制器相比，系统的控制性能得到了较大的改善。
This paper presents PID controller using QFT and makes simulation of numerical value fabric system of two dimensional control, proves validity of controller.
本文中介绍了利用定量反馈理论设计的PID控制器，并对两自由度控制结构系统进行了数值仿真，验证了控制器的有效性。
The system uses electro-hydraulic moment servo control system to simulate wave torque and PID algorithm to control. The result of simulation is up to the requirement.
本系统用电液力矩伺服控制系统来模拟海浪力矩，采用PID算法进行控制，其仿真结果符合要求。
Traditional DC timing system is based on complex PID simulation control system which is composed of schism components, so it has deficiency on reliability, flexibility and control ability.
但传统的直流调速系统所采用的是由分立元件构成的复杂PID模拟控制系统，在可靠性和灵活性以及控制性能都存在不足。
The results of computer simulation show that the maximum overshoot is small-er and the settling time required is shorter as compared with single PID control.
通过计算机进行灰色预测控制仿真，显示超调量小，调节时间短，控制效果优于单一pid控制。
After the mathematics model of the control object of the counter-gravity casting process is analyzed, PID controller is designed, and the PID parameters are determined by MATLAB simulation.
在分析反重力铸造过程控制对象数学模型的基础上，设计了PID控制器，并采用临界稳定法结合MATLAB仿真确定了PID参数。
The research of simulation and the application in the lab manifests that the characteristic of fuzzy PID controller is better than the normal one, it can improve efficiently control effect.
仿真研究和在实验室的实际应用表明，模糊pid控制器特性比常规pid控制器更优良，能有效地改善控制效果。
Also simulation results of sine wave, square wave and random simulation reappearance show that the fuzzy PID controller is higher accuracy and better dynamic performance than conventional PID control.
并对正弦波、方波以及随机波进行仿真再现，仿真结果表明，该模糊pid控制器比常规pid控制器具有更高的控制精度和更好的动态性能。
Parameters such as track error band and steering mode can be modified arbitrarily in the parameter's window. The simulation of ship motion control is carried out with PID algorithm.
可在参数窗口中任意更改航迹偏差带、操作方式等参数，采用PID控制算法进行了船舶航迹控制仿真。
And the electromechanical simulation of coarse and fine tracking aiming system is done respectively which take the PID as algorithm for control, and MATLAB as tool for simulation.
引入PID控制算法，运用了MATLAB作为仿真工具，分别完成了粗精跟踪瞄准系统的机电动力学仿真。
According to the result of simulation, we can find the fuzzy PID algorithm has improved the control effectiveness and dynamic and static performance of system significantly.
从仿真结果来看，模糊pid自整定算法极大的改善了系统的控制性能，使被控对象有更好的动、静态性能。
Finally, through MATLAB simulation demonstrates and verifies the control performance of the proposed self-tuning control in comparison with the traditionally designed PID control.
最后，运用MATLAB仿真软件对广义最小方差自校正控制算法进行仿真，并与传统控制规律(常规pid控制)的仿真结果进行比较分析。
The simulation results show that the superheated steam temperature control system using this algorithm has better performances than that of fuzzy PID control system.
仿真结果表明，利用该算法设计的汽温控制系统比应用模糊pid控制设计的汽温控制系统具有更加优良的性能。
The simulation results illustrate this type of composite control system is with better qualities than those of single fuzzy controller and single PID controller.
仿真结果表明，与传统PID控制系统及单纯模糊控制系统相比，两种控制系统相结合可以得到更佳的控制效果。
The simulation results show that the control sy stem which uses the robust PID controllers has better robust performance than th at of the conventional PID control system.
仿真结果表明，用本文方法设计的过热汽温控制系统比常规的PID控制具有较好的鲁棒性能。
The results of simulation and experiments show that the single neuron adaptive PID control method is very good in improving following performance to ideal speed curve.
通过计算机仿真及其在实用电梯上的试验，结果表明基于单神经元自适应PID控制的方法，对提高电梯速度的跟踪性能有较好的作用。
In view of the result of simulation, LQR regulation is excellent to the PID control system, LQR regulation accuse as velocity steady controlling in the pump-controlled motor system is better.
从仿真结果上看，LQR调节的性能优与PID控制，说明采用LQR调节器作为泵控马达恒速控制系统的控制方法是良好的。
A cost function is used as the criterion of performance evaluation and simulation is made to analyze the effect of all sorts of network delays on the PID control performance.
使用一种代价函数作为性能评估标准，并通过仿真实验分析了各种网络延时对PID控制性能的影响。
The simulation results and the comparison with PID cascade control show that the PFC-PID cascade control strategy can improve the controlled performance of AC servo-system.
通过仿真及与PID控制的比较表明，采用PF C - PID串级控制策略能够改善交流伺服系统的控制特性。
The computer simulation results indicate that the fuzzy PID control system is more robust than the comparable linear PID control system in control of the tissue temperature.
计算机仿真结果表明模糊控制系统在组织温度控制中比对应的线性PID控制系统鲁棒。
The simulation results showed that control effect of the controller was better than that of the conventional PID control arithmetic and the PID control arithmetic of fuzzy self adaptation.
仿真结果表明该控制器的控制效果优于传统的PID控制算法和模糊自适应PID控制算法。
The simulation results show that the new PFC-PID control method has better tracking performance, robustness and anti-disturbance ability than those of feed-forword PID control.
并通过仿真比较该算法与PID前馈控制的效果，验证其具有良好的跟踪性能、鲁棒性和抗干扰能力。
应用推荐