In this paper a stiffness simulation calculation method of low speed flutter models of an aeroplane is studied.
本文探讨了飞机低速颤振模型刚度模拟计算的一种方法。
Through systematic analysis of ANSYS modelling and meshing module, incorporation roadway design experience, a simulation calculation method on U29-type steel flexible support was found out.
通过对ANSYS模型建立和网格划分模块的系统分析，结合巷道支护经验，找出了对U 29型钢可缩性支架进行模拟计算的方法。
The results of calculation and simulation indicate that application of the discrete method for problem of trajectory optimization can avoid the problem of initial value sensitivity.
仿真计算结果表明这种离散化的方法应用于此轨道优化问题可以避免传统轨道优化方法对初值敏感的问题。
For a typical assembly stress problem, digital simulation is conducted by means of the hybrid method with different numerical calculation methods.
针对一个典型的装配应力问题，运用不同的数值计算方法，对混合求解法进行了数值模拟。
This paper studies the simulation method of tie line power flow control among areas of an interconnected network in load flow calculation.
本文对潮流计算中互联电网各区域间的联络线功率控制的模拟计算方法进行了研究。
The functions, calculation method, component module and program running interface of this simulation model are introduced.
描述了该仿真模型的功能、计算方法和部件模块设计及程序运行界面。
An improved numerical model and calculation method for stability simulation of a novel type of a pulse tube refrigerator.
第一部分给出了脉冲管制冷机数值模拟的基本方程和改进的数值计算方法。
The conception of transient frequency and calculation method of wavelet packet are introduced, and time frequency distribution about simulation and actual seismic signals is given.
介绍了瞬时频率的概念和瞬态谱的小波包计算方法，并结合时间域模拟信号给出了其时频分布。
The detailed process and method of Monte Carlo simulation calculation are presented.
详细叙述了蒙特卡洛模拟计算的具体过程和方法。
In this study, a suit of formula for mining overburden bed separation volume calculation was developed based on numerical simulation using cube shape curve regression method.
文章的研究基于数值模拟，采用三次样条曲线回归方法，推导出一套计算采动覆岩离层量大小的公式。
The method is adopted in the tail-race system dynamic simulation calculation of Baise hydropower station, and the tailrace tunnel shape is optimized, so the satisfying result is worked out.
将该方法应用于百色水电站的尾水系统动态仿真计算中，并对尾水隧洞洞型进行优化，得到了满意的结果。
Because the calculation method is accomplished by MATLAB Tool, it is in favor of realizing design and simulation of high-frequency chain switch power supply circuit.
由于该计算方法是在MATLAB环境下进行，有利于进一步实现高频链开关电源电路的设计和仿真。
With the theory of finite element method, the simulation calculation is conducted for the axial pressure distribution law, the leakage rate and the pressure variation of the seal rings.
利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。
It is new approaches for seek nitriding technological optimal control and simulation method that is provided by calculation result evincing this model is high precision and strong control ability.
计算结果表明模型精度高、控制能力强，为寻求渗氮工艺的最优控制、模拟方法提供了新途径。
Then, the complex integral calculation problem in the reliability model of stress and strength interference was simplified by using the Monte Carlo Simulation Method.
其次，采用应力与强度干涉模型和蒙特卡罗模拟法，解决了可靠度计算公式中复杂积分的计算问题。
The charge simulation method for the calculation of the electric field intensity in the rod-plate gap is also briefly introduced.
为了进行外加场强的计算，文中还简介了用模拟电荷法计算棒——板间隙场强的方法。
This paper strives to provide an important numerical simulation method for the practical engineering implementation by means of modern fire resistant design based on calculation.
力求通过基于计算的现代耐火设计，为实际工程实施提供重要的数值模拟方法。
The study indicates that the calculation model and simulation method are reasonable and feasible, so can be applied to the optimizing design for linear shaped charge cutter.
计算结果与线型聚能射流的物理现象和规律相吻合，说明该计算模型和模拟方法合理、可行，可用于线型聚能切割器的优化设计。
The temperature field and thermal camber of the roll are made in numerical simulation by finite difference method and the calculation values coincide better with the measured values.
采用有限差分法对轧辊温度场和热凸度进行了数值模拟，计算值和实测值吻合较好。
To achieve the purpose, we have developed a calculation method of numerical simulation and the ways on how to use the method to simulate a model of the area source properly.
采用数值模拟计算的方法，对面源模式做了实际计算，并将其计算结果与虚点源后置法做了分析和比较。
In this paper the improved method, also named transformation of the polar, is used to predigest the iterative calculation, and the simulation calculation has been progressed.
文中运用了一种改进的球谐函数法，即换极法，大大简化了勒让德函数的递推计算，并进行了换极前后被动段扰动引力的仿真计算。
The result of simulation indicates that this method not only satisfies the precision but also enables us to enhance the calculation speed of the trajectory equations.
仿真结果表明换极后的球谐函数计算扰动引力能够满足精度要求，且在计算中弹道方程的解算速度也有很大的提高。
Simulation and calculation show that this method is capable for the fine description and calculation of fracture.
模拟计算表明，运用该算法能较好地描述裂缝。
Based on the RCS calculation method of a single chaff, using vector transport theory, a computer simulation on the RCS calculation of chaff cloud is conducted.
以单根箔条rcs的计算方法为基础，使用矢量输运理论对箔条云团rcs的计算进行了计算机仿真，并基于半解析法开发了箔条云团rcs模拟仿真软件包。
This paper presents the numerical simulation method and calculation results for the flow around a high lift devices of airplane.
本文给出了飞机增升装置气动力特性的数值计算方法和计算结果。
Simulation calculation results indicate that the method can be used in the analysis of an anisotropic medium.
模拟计算表明该方法可用于各向异性介质的分析。
The paper explains the characteristic of GMS and the method of building model in the groundwater simulation software and gives a calculation example.
本文通过地下水模拟软件中具有代表性的GMS，阐述了它的一些基本特点，以及它在地下水模拟过程中的建模方法，并给出了一个计算实例。
The paper explains the characteristic of GMS and the method of building model in the groundwater simulation software and gives a calculation example.
本文通过地下水模拟软件中具有代表性的GMS，阐述了它的一些基本特点，以及它在地下水模拟过程中的建模方法，并给出了一个计算实例。
应用推荐