By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
The paper provides the mathematical model of numerical simulation for metal surface hardened by plasma-arc with finite element method.
给出了用有限元方法对金属材料等离子体弧金属表面强化处理过程数值模拟的数学模型。
The mathematical models are amended by BP neural network algorithm, and method of finite element numerical simulation is used to compensate the removal data and extend the applied range.
应用BP -神经网络法对数学模型进行修正，建立有限元数值模拟方法补充剔除数据并对数学模型适用范围进行扩展。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
The simulated ultimate load formula and double-control design method of slender eccentrically compressed reinforced concrete member were proposed by nonlinear finite element simulation analysis.
并通过非线性有限元模拟分析，给出了细长钢筋混凝土压杆的极限承载力表达式以及由此确定的双控设计法。
The parameters affecting the bulging of the sheet have been studied by finite element numerical simulation method with the law of the parameters affecting the bulging obtained.
本文利用有限元数值模拟方法对影响板料胀形性能的参数进行了研究，并得出了各参数对板料胀形性能影响程度的规律。
A method combining indentation test with finite element simulation is proposed to obtain the ductile parameters of KDP crystal by comparing indentation depth with finite element simulation depth.
提出了压痕实验与有限元仿真结合的方法。它采用压痕深度与有限元仿真深度进行对比，可求解出KDP晶体的塑性特性参数。
It makes use of finite element method to carry out the numerical value simulation by software in reality in order to get the condition of strain and deformation on the main axle installing.
利用有限元法，通过有限元分析软件对其实际工况进行整体结构数值模拟，得出主轴装置在实际工况下的应力、变形情况。
Transient numerical simulation for Bridgman method was carried out by means of deforming finite element method .
采用变形有限元法对坩埚下降法晶体生长过程进行了瞬态数值模拟。
In a. plane rectangular coordinate system, mathematics simulation of the change of moisture content in a corn kernel during tempering is presented by the finite element method.
在平面直角坐标下，利用有限元方法，对玉米颗粒在缓苏过程中的含水量变化进行了数学模拟。
First, the paper presents the simulation of ring rolling processes by rigid-viscoplastic dynamic finite element method and the H-RING code.
采用刚粘塑性动力有限元模拟环轧动态过程，获得轧制过程中的分布量计算结果。
By using finite element simulation method and plastic distortion theory, the author analyzes the principle of the stretch bending forming and builds finite element model of rotary stretch bending.
本文采用有限元模拟的方法，结合金属成形的塑性变形理论，深入分析了拉弯的成形机理，建立了用于转台式拉弯成形模拟的有限元模型。
This paper gave the computer simulation of natural frequencies and vibrational modes of truck frames, based on the structural features of the frame, by finite element method of thin wall rod system.
本文根据汽车车架结构的特点，应用薄壁杆系有限单元法，对汽车车架的固有频率和主振型进行了计算。
A numerical simulation was performed to calculate temperature and stress distribution in K9 glass sample irradiated by pulse CO2 laser using finite element method.
利用有限元法对脉冲CO2激光辐照K 9玻璃样品中的温度和应力分布进行了数值分析。
Numerical simulation of finite element method for pile-bucket foundation under uplifting load were conducted by making use of ANSYS software.
通过使用ANSYS软件，对桩-桶基础上拔试验进行有限元数值模拟。
By means of finite element method, a numerical simulation of water impact is proceeded for a three-dimensional wedge-shaped structure impacting on the fluid field with a free-surface.
本文采用有限元法，就三维楔形体结构对带自由表面流场的撞水过程进行了数值模拟。
This paper uses inverse finite element method combined with forward finite element method to design blank of automobile panel, and proves its rationality by physical simulation.
本文采用有限元逆向法和正向法结合的方法，确定覆盖件零件的成形毛坯，并用物理实验验证了其合理性。
This method established the fracture propagation inversion model firstly, based on law of fracture propagation and extended finite element method, by using annealing simulation method.
首先，基于裂缝扩展规律，采用扩展有限元方法，利用模拟退火技术，建立裂缝扩展反演模拟模型；
An analysis of spinning quality defect on aluminium sheet taper was carried out and studied based on simulation of spinning by finite element method.
针对铝锥旋压成形中出现的质量缺陷，通过有限元分析模拟其成形过程。
The simulated ultimate load formula and double-control design method of slender eccentrically compressed reinforced concrete member were proposed by nonlinear finite element simulation...
并通过非线性有限元模拟分析，给出了细长钢筋混凝土压杆的极限承载力表达式以及由此确定的双控设计法。
According to mechanics, a stiffness model of the flexible beam was established. Then the parameters of the beams were determined by a simulation in finite element method.
根据力学原理，建立了柔性梁的刚度模型，结合有限元法进行仿真分析，确定出梁的结构参数尺寸。
Furthermore, it is shown that numerical simulation is a powerful tool to calculate static lateral pressure with a case study by the finite element method.
此外，通过有限单元法算例说明数值计算方法是求解静止侧压力的有效工具。
Furthermore, it is shown that numerical simulation is a powerful tool to calculate static lateral pressure with a case study by the finite element method.
此外，通过有限单元法算例说明数值计算方法是求解静止侧压力的有效工具。
应用推荐