The validity of the new model has been examined by the bar rolling experiment and the rigid-plastic FEM simulation.
为验证新模型，完成了棒材轧制试验，并且利用刚塑性有限元法对轧制过程进行了模拟。
The simulation of roll forming with multiple passes was studied by FEM software ABAQUS.
利用ABAQUS软件对多道次辊弯成形数值模拟技术进行了研究。
Conjugate gradient method were choosed to solve the large sparse matrix equations induced by the FEM and computer language FORTRAN was used to programme the numerical simulation system software.
选择共轭梯度法解决由有限元法形成的大型稀疏矩阵方程，应用FORTRAN语言编制了数值模拟系统软件。
In this paper, the research on numerical simulation of punch-forming parameters for automobile frame parts of sheet metal is done by using the non-linear FEM software SHEET-FORMING.
本文以非线性有限元软件包SHEET- FORMING对某汽车落地骨架零件的冲压工艺参数进行数值模拟研究。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
This paper carries out analysis on the numerical values in the construction of soft and weak rock tunnel by means of nonlinear FEM numerical value simulation method.
采用非线性有限元数值模拟的方法，对软弱围岩隧道施工进行了数值分析。
Computer simulation on complicate shaped parts during quenching process has been realized by using FEM analysis of temperature field phase transformation-stress and strain.
籍助于温度场-相变-应力和应变的有限元分析方法(FEM)，实现了复杂形状工件淬火过程的计算机模拟。
The numerical simulation of thermal stresses and deformation of an engine cylinder block casting was carried out by FDM/FEM integrated system.
对发动机气缸体铸件从浇注完到开箱落砂后的铸造过程应力场进行计算机数值模拟。
The validity of the new model was examined by the bar rolling experiment and the 3D rigid-plastic FEM simulation.
为了验证新模型，进行了棒材轧制试验并且利用三维刚塑性有限元法对轧制过程进行了模拟。
But a great number of data will be created in the process of simulation, especially in the multistep excavation simulated by FEM.
但是，有限元模拟基坑工程，尤其是对多步施工的基坑工程的模拟，产生了“海量”数据。
The failure mechanism of interaction process between the foundation and cavity and, the effect of every factor on safe thickness of top plate are studied by FEM simulation.
采用有限单元数值模拟法研究了基础与洞室相互作用下的破坏机制 ，以及各影响因素对浅埋地下洞室安全顶板厚度的影响及相关变化规律。
The feasibility of this controlled rolling technology was studied by FEM simulation.
利用有限元技术，模拟分析了工艺的可行性。
The forming process of drawing of stainless steel flanged hemisphere-shaped workpiece is numerically simulated and analyzed by using the FEM simulation software.
运用有限元模拟软件对不锈钢带凸缘半球面形件进行了拉延过程模拟。
In this paper, the geometric nonlinearity problem is analyzed based on the second beam theory, and a theoretical solution is proposed, whose accuracy is verified by FEM numerical simulation.
本文基于二次梁理论给出了该几何非线性问题的理论解，其正确性通过有限元的数值计算结果得到验证。
A 3d rigid-plastic FEM simulation coupled thermal model for TC4 titanium alloy by warm shear spinning is founded and the temperature boundary condition of heating by flame is applied.
针对TC 4钛合金锥形件建立了三维热力耦合有限元模型，在有限元模拟过程中叠加了火焰加热边界条件。
The magnetic forces and dynamic deformation analyses for tube-compression by electromagnetic forming are performed by coupled fields FEM numerical simulation.
对管件电磁缩径的磁场力和动态变形进行了耦合场FEM数值模拟。
The residual stress of the beryllium ring weldment was studied by FEM simulation and X ray stress measurement.
采用有限元分析法和X射线应力测试法对铍环形焊件的残余应力分布规律进行了研究。
Limit span determined by similarity simulation is between that by FEM and that by the formula proposed in the paper.
相似模拟的极限跨度介于有限元与本文所给公式之间所得结果。
It was shown that the failure members obtained by numerical analysis agreed very well with practical situation, which verified the air temperature rise simulation and the FEM analysis.
有限元数值模拟杆件破坏情况与实际火灾的破坏情况一致，验证了温度分布的正确性和有限元分析过程的合理性。
Construction process simulation is achieved through using the column length variation method and creep is considered by Age-Adjusted Effective Modulus method in my FEM program.
自编程序用柱长变化的方法模拟施工过程，并采用按龄期调整的有效模量法考虑徐变效应。
The feasibility of hydroforming tri-branch tube is proved by FEM. The corresponding thickness and strain distribution of different axial feed velocity on the simulation is analyzed.
利用有限元法证实了内高压成形三通管的可行性，给出了不同轴向进给速度下零件的壁厚及应变分布，并就轴向进给速度对成形的影响进行了分析。
The initiation time of crack is measured by strain gauge on the sample. The fracture toughness of the composite material is determined by FEM numerical simulation.
使用应变片方法确定了裂纹的起裂时间，结合有限元数值模拟得到了裂纹的起裂韧性；
In this paper, the mechanical behaviour of a shield tunnel construction in urban metro adjacent to existing pile foundation is studied by using 3d FEM ANASYS numerical simulation method.
针对城市地铁新建隧道近接既有民房桩基的工程情况，进行了三维有限元数值模拟的施工力学行为研究。
On the basis of simulation of transient temperature field, the whole process of Xiaowan arch DAMS transverse joints aperture is simulated by use of transient 3-d nonlinear FEM.
在三维瞬态温度场仿真计算结果的基础上，利用三维瞬态非线性有限元方法对小湾拱坝横缝开度进行了全过程仿真分析。
With FEM simulation, the cost and tooling design time can be reduced significantly by minimizing the number of try outs.
通过有限元法分析可减少试模次数，从而降低消耗，缩短模具设计时间。
With FEM simulation, the cost and tooling design time can be reduced significantly by minimizing the number of try outs.
通过有限元法分析可减少试模次数，从而降低消耗，缩短模具设计时间。
应用推荐