The design of parameter extraction program based on the circuits simulation combined with practical technology is also introduced.
叙述了把电路模拟与实际工艺结合起来的参数提取程序的设计。
To offer a theoretical foundation for chemical equipment design, three-dimensional numerical simulations are made for compressible turbulent mixing shear layer based on large eddy simulation(LES).
为了加深对复杂流动混合现象的认识，为化工设备设计提供理论基础，用大涡模拟方法对可压缩气体混合层进行了三维数值模拟。
The result proves that design methodology based on SI simulation can solve SI problems effectively, guarantee design quality and improve design efficiency.
实际系统设计证明，基于该流程的设计方法能够有效的解决系统的信号完整性问题，保证了设计质量，提高了设计效率。
Based on role interact mode, the paper discusses the design method of B2B e-commerce simulation teaching system, for the purpose of providing an interactive and practical for students.
从提供一个交互、实用的B2B电子商务教学环境目的出发，基于角色互动模式的思路，阐述了B2B电子商务模拟教学系统的设计方法。
Based on the view of efficient using energy, the optimum design and numerical simulation system is developed for the hot-blast and organic heat carrier boiler.
基于能源合理有效利用的观点，开发出一套用于热风热油载体锅炉的优化设计和数值仿真系统。
At first, many classes for system were developed in this paper, owing to them, a method to design a chemical process simulation system based on class library was provided.
本文首先设计开发了系统水平上的系统类，在此基础上给出了基于类库的化工过程模拟系统的设计方法。
Based on ACIS, the WEDM oriented software for the design and mesh simulation of micro gears is developed, by which the modeling, mesh simulation and interference check can be implemented.
基于ACIS几何平台，开发了面向线切割的微小齿轮设计和啮合仿真软件，实现了微小齿轮的造型，并可进行啮合过程仿真和干涉检验。
This article introduces the design and implementation of workflow simulation model based on ABC approach for workflow model based activity network graph.
该文对以活动网络图为基础建立的工作流模型，提出了一种基于ABC法的工作流仿真模型的设计与实现。
Based on the analysis of the semiconductor device simulation procedure, this paper proposed a popular design method of the device simulation software.
本文在对半导体器件模拟过程分析的基础上，提出了目前广为流行的器件模拟软件面向对象的设计和开发方法。
Simple linear quantizer model can be used to analysis over sampling and noise shaping, and can be used to design modulator based on large amount of simulation, too.
简单的线性模型可以用来分析过采样和噪声整形的特性，也可以在大量仿真做支持的情况下，用来作为设计的近似模型。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
A design flow based on mixed-signal simulation is proposed. The top-down design method indicates simulation and verification at each level of the mixed signal system design.
介绍了数模混合信号仿真的设计流程，说明了一种在混合设计的各个层次上对系统进行仿真验证的自上而下的设计方法。
The overall study on rock cutting slope with air-raid shelter is presented based on the stabilization design of the slope including the numerical simulation analysis and field tests.
结合对某大厦边坡的加固设计，通过数值模拟稳定性分析和现场观测结果分析，对含有防空洞的岩石开挖边坡进行了较为全面的研究。
Based on FEA simulation, design of composite subway station is mere effective and appropriate.
复合式地铁车站以有限元数值模拟结果可为结构设计提供参考依据。
The main focuses of this thesis are model simulation, coupling analyses, decoupling PID controller design and multivariable predictive controller design based on wastewater treatment Benchmark.
本文的主要工作是模型仿真、系统的耦合性分析、多变量pid解耦控制器设计及多变量预测控制器设计。
The paper presents a high-speed circuit design flow based on SI simulation, and illustrates this design flow using a design instance of high performance DSP parallel system.
文章讨论了基于SI仿真技术的高速电路设计流程，并结合高性能DSP并行系统设计实例进行展开说明。
Then we laid emphasis on algorithm design and simulation for dynamic walking motion planning. The dynamic motion planning method based on ZMP (Zero Moment Point) has been discussed in detail.
论文重点讨论了动态步行的算法设计和仿真，详细分析了基于零力矩点的仿人机器人动态步行运动规划方法。
Based on this, the design of casting process was optimized, the solidification process was simulated again, the results of simulation were compared and analyzed.
在此基础上对其铸造工艺进行了修改，工艺优化，又一次进行凝固模拟，对前后模拟结果进行了分析与比较。
Then the fuzzy multi-objective decision methods and mathematics model of product project based on virtual design simulation for product life-cycle were expounded.
在此基础上提出了虚拟环境下生命周期产品设计方案模糊多目标决策方法和数学模型。
This paper analyses nonlinear mapping characteristics of cloud model, presents the design method of the intelligent controller based on the structure model, and shows some simulation examples.
文中分析了云模型的非线性映射特性，同时给出了基于此结构模型的智能控制器的设计方法及仿真实例。
The paper studies the compiler technology based on virtual machines for the programmable device simulation problem, puts forward a concrete plan of design.
论文针对可编程器件的仿真问题，对基于虚拟机的编译器技术进行了较深入的研究，提出了具体的设计方案。
This method is based on multi-delay modeling, SPICE and logic simulation. It provides an effective tool to design and analysis asynchronous data-path.
这种方法在进行性能分析时基于多延迟模型、SPICE和逻辑仿真，可以作为异步数据通路设计和分析的一种有效工具。
It is very important to find design defects and to improve the system reliability when digital human models based on anthropometric data are applied in simulation of manned spacecraft design scheme.
将基于人体测量参数的数字人体模型应用于载人航天器设计方案的仿真评价对发现设计缺陷，提高整个系统的安全可靠性具有重要意义。
It is very important to find design defects and to improve the system reliability when digital human models based on anthropometric data are applied in simulation of manned spacecraft design scheme.
将基于人体测量参数的数字人体模型应用于载人航天器设计方案的仿真评价对发现设计缺陷，提高整个系统的安全可靠性具有重要意义。
应用推荐